--- /dev/null
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#include <ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "gsw_mt7620.h"
+
+void mtk_switch_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg)
+{
+ iowrite32(val, gsw->base + reg);
+}
+
+u32 mtk_switch_r32(struct mt7620_gsw *gsw, unsigned reg)
+{
+ return ioread32(gsw->base + reg);
+}
+
+static irqreturn_t gsw_interrupt_mt7621(int irq, void *_priv)
+{
+ struct fe_priv *priv = (struct fe_priv *)_priv;
+ struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv;
+ u32 reg, i;
+
+ reg = mt7530_mdio_r32(gsw, 0x700c);
+
+ for (i = 0; i < 5; i++)
+ if (reg & BIT(i)) {
+ unsigned int link;
+
+ link = mt7530_mdio_r32(gsw,
+ 0x3008 + (i * 0x100)) & 0x1;
+
+ if (link != priv->link[i]) {
+ priv->link[i] = link;
+ if (link)
+ netdev_info(priv->netdev,
+ "port %d link up\n", i);
+ else
+ netdev_info(priv->netdev,
+ "port %d link down\n", i);
+ }
+ }
+
+ mt7620_handle_carrier(priv);
+ mt7530_mdio_w32(gsw, 0x700c, 0x1f);
+
+ return IRQ_HANDLED;
+}
+
+static void mt7621_hw_init(struct mt7620_gsw *gsw, struct device_node *np)
+{
+ u32 i;
+ u32 val;
+
+ /* wardware reset the switch */
+ fe_reset(RST_CTRL_MCM);
+ mdelay(10);
+
+ /* reduce RGMII2 PAD driving strength */
+ rt_sysc_m32(3 << 4, 0, SYSC_PAD_RGMII2_MDIO);
+
+ /* gpio mux - RGMII1=Normal mode */
+ rt_sysc_m32(BIT(14), 0, SYSC_GPIO_MODE);
+
+ /* set GMAC1 RGMII mode */
+ rt_sysc_m32(3 << 12, 0, SYSC_REG_CFG1);
+
+ /* enable MDIO to control MT7530 */
+ rt_sysc_m32(3 << 12, 0, SYSC_GPIO_MODE);
+
+ /* turn off all PHYs */
+ for (i = 0; i <= 4; i++) {
+ val = _mt7620_mii_read(gsw, i, 0x0);
+ val |= BIT(11);
+ _mt7620_mii_write(gsw, i, 0x0, val);
+ }
+
+ /* reset the switch */
+ mt7530_mdio_w32(gsw, 0x7000, 0x3);
+ usleep_range(10, 20);
+
+ if ((rt_sysc_r32(SYSC_REG_CHIP_REV_ID) & 0xFFFF) == 0x0101) {
+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
+ mtk_switch_w32(gsw, 0x2305e30b, GSW_REG_MAC_P0_MCR);
+ mt7530_mdio_w32(gsw, 0x3600, 0x5e30b);
+ } else {
+ /* (GE1, Force 1000M/FD, FC ON, MAX_RX_LENGTH 1536) */
+ mtk_switch_w32(gsw, 0x2305e33b, GSW_REG_MAC_P0_MCR);
+ mt7530_mdio_w32(gsw, 0x3600, 0x5e33b);
+ }
+
+ /* (GE2, Link down) */
+ mtk_switch_w32(gsw, 0x8000, GSW_REG_MAC_P1_MCR);
+
+ /* Set switch max RX frame length to 2k */
+ mt7530_mdio_w32(gsw, GSW_REG_GMACCR, 0x3F0B);
+
+ /* Enable Port 6, P5 as GMAC5, P5 disable */
+ val = mt7530_mdio_r32(gsw, 0x7804);
+ val &= ~BIT(8);
+ val |= BIT(6) | BIT(13) | BIT(16);
+ mt7530_mdio_w32(gsw, 0x7804, val);
+
+ val = rt_sysc_r32(0x10);
+ val = (val >> 6) & 0x7;
+ if (val >= 6) {
+ /* 25Mhz Xtal - do nothing */
+ } else if (val >= 3) {
+ /* 40Mhz */
+
+ /* disable MT7530 core clock */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x410);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x0);
+
+ /* disable MT7530 PLL */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x40d);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x2020);
+
+ /* for MT7530 core clock = 500Mhz */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x40e);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x119);
+
+ /* enable MT7530 PLL */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x40d);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ _mt7620_mii_write(gsw, 0, 14, 0x2820);
+
+ usleep_range(20, 40);
+
+ /* enable MT7530 core clock */
+ _mt7620_mii_write(gsw, 0, 13, 0x1f);
+ _mt7620_mii_write(gsw, 0, 14, 0x410);
+ _mt7620_mii_write(gsw, 0, 13, 0x401f);
+ } else {
+ /* 20Mhz Xtal - TODO */
+ }
+
+ /* RGMII */
+ _mt7620_mii_write(gsw, 0, 14, 0x1);
+
+ /* set MT7530 central align */
+ val = mt7530_mdio_r32(gsw, 0x7830);
+ val &= ~BIT(0);
+ val |= BIT(1);
+ mt7530_mdio_w32(gsw, 0x7830, val);
+ val = mt7530_mdio_r32(gsw, 0x7a40);
+ val &= ~BIT(30);
+ mt7530_mdio_w32(gsw, 0x7a40, val);
+ mt7530_mdio_w32(gsw, 0x7a78, 0x855);
+
+ /* delay setting for 10/1000M */
+ mt7530_mdio_w32(gsw, 0x7b00, 0x102);
+ mt7530_mdio_w32(gsw, 0x7b04, 0x14);
+
+ /* lower Tx Driving*/
+ mt7530_mdio_w32(gsw, 0x7a54, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a5c, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a64, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a6c, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a74, 0x44);
+ mt7530_mdio_w32(gsw, 0x7a7c, 0x44);
+
+ /* turn on all PHYs */
+ for (i = 0; i <= 4; i++) {
+ val = _mt7620_mii_read(gsw, i, 0);
+ val &= ~BIT(11);
+ _mt7620_mii_write(gsw, i, 0, val);
+ }
+
+ /* mask irq */
+ mt7530_mdio_w32(gsw, 0x7008, 0x1f);
+ /* enable irq */
+ val = mt7530_mdio_r32(gsw, 0x7808);
+ val |= 3 << 16;
+ mt7530_mdio_w32(gsw, 0x7808, val);
+}
+
+static const struct of_device_id mediatek_gsw_match[] = {
+ { .compatible = "mediatek,mt7621-gsw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mediatek_gsw_match);
+
+int mtk_gsw_init(struct fe_priv *priv)
+{
+ struct device_node *np = priv->switch_np;
+ struct platform_device *pdev = of_find_device_by_node(np);
+ struct mt7620_gsw *gsw;
+
+ if (!pdev)
+ return -ENODEV;
+
+ if (!of_device_is_compatible(np, mediatek_gsw_match->compatible))
+ return -EINVAL;
+
+ gsw = platform_get_drvdata(pdev);
+ priv->soc->swpriv = gsw;
+
+ if (gsw->irq) {
+ request_irq(gsw->irq, gsw_interrupt_mt7621, 0,
+ "gsw", priv);
+ mt7530_mdio_w32(gsw, 0x7008, ~0x1f);
+ }
+ mt7621_hw_init(gsw, np);
+
+ return 0;
+}
+
+static int mt7621_gsw_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ const char *port4 = NULL;
+ struct mt7620_gsw *gsw;
+ struct device_node *np;
+
+ gsw = devm_kzalloc(&pdev->dev, sizeof(struct mt7620_gsw), GFP_KERNEL);
+ if (!gsw)
+ return -ENOMEM;
+
+ gsw->base = devm_ioremap_resource(&pdev->dev, res);
+ if (!gsw->base)
+ return -EADDRNOTAVAIL;
+
+ gsw->dev = &pdev->dev;
+
+ of_property_read_string(np, "mediatek,port4", &port4);
+ if (port4 && !strcmp(port4, "ephy"))
+ gsw->port4 = PORT4_EPHY;
+ else if (port4 && !strcmp(port4, "gmac"))
+ gsw->port4 = PORT4_EXT;
+ else
+ gsw->port4 = PORT4_EPHY;
+
+ gsw->irq = platform_get_irq(pdev, 0);
+
+ platform_set_drvdata(pdev, gsw);
+
+ return 0;
+}
+
+static int mt7621_gsw_remove(struct platform_device *pdev)
+{
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gsw_driver = {
+ .probe = mt7621_gsw_probe,
+ .remove = mt7621_gsw_remove,
+ .driver = {
+ .name = "mt7621-gsw",
+ .owner = THIS_MODULE,
+ .of_match_table = mediatek_gsw_match,
+ },
+};
+
+module_platform_driver(gsw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("GBit switch driver for Mediatek MT7621 SoC");
+MODULE_VERSION(MTK_FE_DRV_VERSION);
projects / openwrt / staging / chunkeey.git / blobdiff