ramips: add support for Beeline SmartBox Flash

[openwrt/staging/chunkeey.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 52e0b6b572eb3e8757e168281faf43d944d961b4..1fc0ccdd5b54588abe0a2c450b8f962401b419a7 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -26,6 +26,9 @@ ramips_setup_interfaces()
        hiwifi,hc5962|\
        xiaomi,mi-router-3-pro|\
        xiaomi,mi-router-ac2100|\
+       xiaomi,mi-router-cr6606|\
+       xiaomi,mi-router-cr6608|\
+       xiaomi,mi-router-cr6609|\
        xiaomi,redmi-router-ac2100)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
                ;;
@@ -35,10 +38,13 @@ ramips_setup_interfaces()
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
+       beeline,smartbox-flash|\
        glinet,gl-mt1300|\
+       iptime,a3002mesh|\
        jcg,q20|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
+       renkforce,ws-wn530hp3-a|\
        xiaomi,mi-router-3g|\
        xiaomi,mi-router-3g-v2|\
        xiaomi,mi-router-4|\
@@ -59,9 +65,13 @@ ramips_setup_interfaces()
        mikrotik,routerboard-760igs)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
                ;;
-       tplink,eap235-wall-v1)
+       tplink,eap235-wall-v1|\
+       tplink,eap615-wall-v1)
                ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
                ;;
+       tplink,tl-wpa8631p-v3)
+               ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
+               ;;
        ubnt,edgerouter-x)
                ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
@@ -106,6 +116,11 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
                label_mac=$(mtd_get_mac_binary factory 0x4)
                ;;
+       beeline,smartbox-flash)
+               lan_mac=$(mtd_get_mac_ascii u-boot-env eth2macaddr)
+               wan_mac=$(mtd_get_mac_ascii u-boot-env eth3macaddr)
+               label_mac=$lan_mac
+               ;;
        buffalo,wsr-1166dhp)
                local index="$(find_mtd_index "board_data")"
                wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"