ramips: Add support for TP-Link TL-WPA8631P v3

[openwrt/staging/mkresin.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 34be067..3e93489
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 
 . /lib/functions.sh
 . /lib/functions/uci-defaults.sh
@@ -9,44 +8,83 @@ ramips_setup_interfaces()
        local board="$1"
 
        case $board in
-       asiarf,ap7621-001)
+       ampedwireless,ally-00x19k|\
+       edimax,re23s|\
+       mikrotik,routerboard-m11g|\
+       netgear,ex6150|\
+       sercomm,na502|\
+       thunder,timecloud|\
+       tplink,re350-v1|\
+       tplink,re500-v1|\
+       tplink,re650-v1|\
+       ubnt,unifi-6-lite|\
+       ubnt,unifi-nanohd)
+               ucidef_set_interface_lan "lan"
+               ;;
+       ampedwireless,ally-r1900k|\
+       gehua,ghl-r-001|\
+       hiwifi,hc5962|\
+       xiaomi,mi-router-3-pro|\
+       xiaomi,mi-router-ac2100|\
+       xiaomi,mi-router-cr6606|\
+       xiaomi,mi-router-cr6608|\
+       xiaomi,mi-router-cr6609|\
+       xiaomi,redmi-router-ac2100)
+               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+               ;;
+       asiarf,ap7621-001|\
+       humax,e10|\
+       winstars,ws-wn583a6)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
+       glinet,gl-mt1300|\
+       iptime,a3002mesh|\
+       jcg,q20|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
-       xiaomi,mir3g|\
-       xiaomi,mir3g-v2)
+       xiaomi,mi-router-3g|\
+       xiaomi,mi-router-3g-v2|\
+       xiaomi,mi-router-4|\
+       xiaomi,mi-router-4a-gigabit)
                ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
                ;;
-       gehua,ghl-r-001|\
-       hiwifi,hc5962|\
-       xiaomi,mir3p)
-               ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
-               ;;
        gnubee,gb-pc1|\
        gnubee,gb-pc2)
                ucidef_set_interface_lan "lan1 lan2"
                ;;
-       linksys,re6500)
+       linksys,re6500|\
+       netgear,wac104)
                ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
                ;;
-       mikrotik,routerboard-m11g|\
-       netgear,ex6150|\
-       thunder,timecloud|\
-       tplink,re350-v1|\
-       tplink,re650-v1|\
-       ubnt,unifi-nanohd)
-               ucidef_set_interface_lan "lan"
-               ;;
        mikrotik,routerboard-750gr3)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
                ;;
+       mikrotik,routerboard-760igs)
+               ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
+               ;;
+       tplink,eap235-wall-v1|\
+       tplink,eap615-wall-v1)
+               ucidef_set_interface_lan "lan0 lan1 lan2 lan3"
+               ;;
+       tplink,tl-wpa8631p-v3)
+               ucidef_set_interface_lan "lan1 lan2 lan3 plc0"
+               ;;
        ubnt,edgerouter-x)
-               ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4"
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
        ubnt,edgerouter-x-sfp)
-               ucidef_set_interface_lan "eth0 eth1 eth2 eth3 eth4 eth5"
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
+               ;;
+       ubnt,usw-flex)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5"
+               ;;
+       zyxel,nr7101)
+               ucidef_set_interfaces_lan_wan "lan" "wan"
+               ;;
+       zyxel,wap6805)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+               ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
                ;;
        *)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
@@ -62,6 +100,15 @@ ramips_setup_macs()
        local label_mac=""
 
        case $board in
+       ampedwireless,ally-00x19k)
+               lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
+               label_mac=$lan_mac
+               ;;
+       ampedwireless,ally-r1900k)
+               lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
+               wan_mac=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
+               label_mac=$lan_mac
+               ;;
        asus,rt-ac65p|\
        asus,rt-ac85p)
                wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
@@ -81,6 +128,11 @@ ramips_setup_macs()
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                ;;
+       elecom,wrc-2533ghbk-i)
+               lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+               wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+               label_mac=$wan_mac
+               ;;
        hiwifi,hc5962)
                lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
                label_mac=$lan_mac
@@ -91,17 +143,41 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                label_mac=$wan_mac
                ;;
+       iptime,t5004)
+               lan_mac=$(mtd_get_mac_ascii config ethaddr)
+               wan_mac=$(macaddr_add "$lan_mac" 1)
+               ;;
+       jcg,y2|\
+       wavlink,wl-wn531a6|\
+       winstars,ws-wn583a6|\
+       zbtlink,zbt-we1326|\
+       zbtlink,zbt-wg3526-16m|\
+       zbtlink,zbt-wg3526-32m)
+               label_mac=$(mtd_get_mac_binary factory 0x4)
+               ;;
+       linksys,e5600|\
+       linksys,ea6350-v4|\
+       linksys,ea7300-v1|\
+       linksys,ea7300-v2|\
+       linksys,ea7500-v2|\
+       linksys,ea8100-v1|\
+       linksys,ea8100-v2)
+               lan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+               wan_mac=$lan_mac
+               label_mac=$lan_mac
+               ;;
        mikrotik,routerboard-750gr3|\
+       mikrotik,routerboard-760igs|\
        mikrotik,routerboard-m11g|\
        mikrotik,routerboard-m33g)
                label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
                wan_mac=$label_mac
                lan_mac=$(macaddr_add $label_mac 1)
                ;;
-       zbtlink,zbt-we1326|\
-       zbtlink,zbt-wg3526-16m|\
-       zbtlink,zbt-wg3526-32m)
-               label_mac=$(mtd_get_mac_binary factory 0x4)
+       raisecom,msg1500-x-00)
+               lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac)
+               wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac)
+               label_mac=$lan_mac
                ;;
        esac