ramips: add support for GL.iNet GL-MT1300

[openwrt/staging/chunkeey.git] / target / linux / ramips / mt7621 / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 4b65dd23642cd84aaf0efd6c7787e56b6e39ad68..bca4cc23dcb24341dbaa1d063c7879e9553f5fa6 100755 (executable)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -9,14 +9,17 @@ ramips_setup_interfaces()
        local board="$1"
 
        case $board in
-       asiarf,ap7621-001)
+       asiarf,ap7621-001|\
+       winstars,ws-wn583a6)
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
+       glinet,gl-mt1300|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
-       xiaomi,mir3g|\
-       xiaomi,mir3g-v2)
+       xiaomi,mi-router-3g|\
+       xiaomi,mi-router-3g-v2|\
+       xiaomi,mi-router-4a-gigabit)
                ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
                ;;
        edimax,re23s|\
@@ -31,8 +34,8 @@ ramips_setup_interfaces()
                ;;
        gehua,ghl-r-001|\
        hiwifi,hc5962|\
+       xiaomi,mi-router-3-pro|\
        xiaomi,mi-router-ac2100|\
-       xiaomi,mir3p|\
        xiaomi,redmi-router-ac2100)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
                ;;
@@ -47,11 +50,18 @@ ramips_setup_interfaces()
        mikrotik,routerboard-750gr3)
                ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
                ;;
+       mikrotik,routerboard-760igs)
+               ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp"
+               ;;
        ubnt,edgerouter-x)
-               ucidef_set_interface_lan_wan "eth1 eth2 eth3 eth4" "eth0"
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
                ;;
        ubnt,edgerouter-x-sfp)
-               ucidef_set_interface_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
+               ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0"
+               ;;
+       zyxel,wap6805)
+               ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+               ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"
                ;;
        *)
                ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
@@ -96,18 +106,23 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
                label_mac=$wan_mac
                ;;
+       linksys,ea7300-v1|\
+       linksys,ea7300-v2|\
        linksys,ea7500-v2)
                lan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
                wan_mac=$lan_mac
                label_mac=$lan_mac
                ;;
        mikrotik,routerboard-750gr3|\
+       mikrotik,routerboard-760igs|\
        mikrotik,routerboard-m11g|\
        mikrotik,routerboard-m33g)
                label_mac=$(cat "/sys/firmware/mikrotik/hard_config/mac_base")
                wan_mac=$label_mac
                lan_mac=$(macaddr_add $label_mac 1)
                ;;
+       wavlink,wl-wn531a6|\
+       winstars,ws-wn583a6|\
        zbtlink,zbt-we1326|\
        zbtlink,zbt-wg3526-16m|\
        zbtlink,zbt-wg3526-32m)