ramips: add support for D-Link DAP-X1860 A1

[openwrt/staging/dedeckeh.git] / target / linux / ramips / mt7621 / base-files / etc / hotplug.d / ieee80211 / 10_fix_wifi_mac

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 0ace1933e3f81714648471177719d0f64aec3aa7..161bd942db858d14940aa0d0e965eba4efd5a2cf 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -10,17 +10,25 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
-       beeline,smartbox-flash|\
-       mts,wg430223)
-               hw_mac_addr_ra0="$(mtd_get_mac_ascii u-boot-env ra0macaddr)"
-               hw_mac_addr_rax0="$(mtd_get_mac_ascii u-boot-env rax0macaddr)"
-               [ "$PHYNBR" = "0" ] && echo -n $hw_mac_addr_ra0 > /sys${DEVPATH}/macaddress
-               [ "$PHYNBR" = "1" ] && echo -n $hw_mac_addr_rax0 > /sys${DEVPATH}/macaddress
+       beeline,smartbox-flash)
+               hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
+               [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 26)
+               hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 27)
+               hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
+               [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
                ;;
        cudy,x6)
                hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
                macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
                ;;
+       dlink,dap-x1860-a1)
+               hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+               [ "$PHYNBR" = "0" ] && \
+                       macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress
+               ;;
        dlink,dir-853-a3)
                [ "$PHYNBR" = "0" ] && \
                        macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
@@ -44,6 +52,12 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && echo -n ${addr:0:9}'1'${addr:10:7} > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && echo -n ${addr:0:9}'7'${addr:10:7} > /sys${DEVPATH}/macaddress
                ;;
+       haier,har-20s2u1|\
+       jcg,y2|\
+       sim,simax1800t)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
+               ;;
        hiwifi,hc5962)
                label_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
                [ "$PHYNBR" = "0" ] && [ -n "$label_mac" ] && \
@@ -68,10 +82,6 @@ case "$board" in
                [ "$PHYNBR" = "1" ] && \
                        macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
                ;;
-       jcg,y2)
-               [ "$PHYNBR" = "1" ] && \
-                       macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
-               ;;
        linksys,e5600|\
        linksys,ea6350-v4|\
        linksys,ea7300-v1|\
@@ -83,11 +93,25 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
                ;;
+       belkin,rt1800|\
+       linksys,e7350)
+               hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr)
+               [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
+               ;;
        netgear,wax202)
                hw_mac_addr=$(mtd_get_mac_ascii Config mac)
                [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
                ;;
+       mts,wg430223)
+               hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
+               [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 26)
+               hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 27)
+               hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
+               [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
+               ;;
        oraybox,x3a)
                if [ "$PHYNBR" = "1" ]; then
                        hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
@@ -111,6 +135,12 @@ case "$board" in
                [ "$PHYNBR" = "1" ] && \
                        macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
                ;;
+       yuncore,fap640|\
+       yuncore,fap690)
+               hw_mac_addr="$(mtd_get_mac_binary Factory 0x4)"
+               [ "$PHYNBR" = "0" ] && macaddr_setbit_la "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               ;;
        zyxel,nwa50ax|\
        zyxel,nwa55axe)
                hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"