+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
- model = "D-Link DGS-1210-10P";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- // GPIO 24 seems to provide power to the leds
- label = "green:power";
- gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- mode {
- label = "reset";
- gpios = <&gpio0 94 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-
-&gpio0 {
- indirect-access-bus-id = <0>;
-};
-
-&spi0 {
- status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x80000>;
- read-only;
- };
- partition@80000 {
- label = "u-boot-env";
- reg = <0x00080000 0x40000>;
- read-only;
- };
- partition@c0000 {
- label = "u-boot-env2";
- reg = <0x000c0000 0x40000>;
- };
- partition@280000 {
- label = "firmware";
- compatible = "denx,uimage";
- reg = <0x00100000 0xd80000>;
- };
- partition@be80000 {
- label = "kernel2";
- reg = <0x00e80000 0x180000>;
- };
- partition@1000000 {
- label = "sysinfo";
- reg = <0x01000000 0x40000>;
- };
- partition@1040000 {
- label = "rootfs2";
- reg = <0x01040000 0xc00000>;
- };
- partition@1c40000 {
- label = "jffs2";
- reg = <0x01c40000 0x3c0000>;
- };
- };
- };
-};
-
-ðernet0 {
- mdio: mdio-bus {
- compatible = "realtek,rtl838x-mdio";
- regmap = <ðernet0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- INTERNAL_PHY(8)
- INTERNAL_PHY(9)
- INTERNAL_PHY(10)
- INTERNAL_PHY(11)
- INTERNAL_PHY(12)
- INTERNAL_PHY(13)
- INTERNAL_PHY(14)
- INTERNAL_PHY(15)
- INTERNAL_PHY(24)
- INTERNAL_PHY(26)
- };
-};
-
-&switch0 {
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- SWITCH_PORT(8, 1, internal)
- SWITCH_PORT(9, 2, internal)
- SWITCH_PORT(10, 3, internal)
- SWITCH_PORT(11, 4, internal)
- SWITCH_PORT(12, 5, internal)
- SWITCH_PORT(13, 6, internal)
- SWITCH_PORT(14, 7, internal)
- SWITCH_PORT(15, 8, internal)
- SWITCH_SFP_PORT(24, 9, rgmii-id)
- SWITCH_SFP_PORT(26, 10, rgmii-id)
-
- port@28 {
- ethernet = <ðernet0>;
- reg = <28>;
- phy-mode = "internal";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-};