--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rtl838x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "apresia,aplgs120gtss", "realtek,rtl8382-soc";
+ model = "APRESIA ApresiaLightGS120GT-SS";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: led-0 {
+ label = "green:pwr";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ };
+
+ led-1 {
+ label = "red:loop";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_FAULT;
+ };
+
+ /* LED chip is soldered, but no hole on the case */
+ led-2 {
+ label = "green:unused";
+ gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 33 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio1 34 GPIO_ACTIVE_LOW>;
+ open-source;
+ };
+
+ gpio1: rtl8231-gpio {
+ compatible = "realtek,rtl8231-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ indirect-access-bus-id = <0>;
+ };
+
+ i2c0: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c-gpio-2 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ /* 4x TX-Disable lines are provided by RTL8214FC */
+ sfp0: sfp-p17 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ sfp1: sfp-p18 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ };
+
+ sfp2: sfp-p19 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c3>;
+ los-gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ };
+
+ sfp3: sfp-p20 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c2>;
+ los-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gpio0 {
+ rtl8231_reset {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "rtl8231-reset";
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u-boot-env";
+ reg = <0x80000 0x40000>;
+ };
+
+ partition@c0000 {
+ label = "u-boot-env2";
+ reg = <0xc0000 0x40000>;
+ };
+
+ partition@100000 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ label = "firmware";
+ reg = <0x100000 0xe80000>;
+ openwrt,ih-magic = <0x12345000>;
+ };
+
+ partition@f80000 {
+ label = "firmware2";
+ reg = <0xf80000 0xe80000>;
+ };
+
+ partition@1e00000 {
+ label = "jffs2";
+ reg = <0x1e00000 0x200000>;
+ read-only;
+ };
+ };
+ };
+};
+
+ðernet0 {
+ mdio-bus {
+ compatible = "realtek,rtl838x-mdio";
+ regmap = <ðernet0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ EXTERNAL_PHY(0)
+ EXTERNAL_PHY(1)
+ EXTERNAL_PHY(2)
+ EXTERNAL_PHY(3)
+ EXTERNAL_PHY(4)
+ EXTERNAL_PHY(5)
+ EXTERNAL_PHY(6)
+ EXTERNAL_PHY(7)
+
+ INTERNAL_PHY(8)
+ INTERNAL_PHY(9)
+ INTERNAL_PHY(10)
+ INTERNAL_PHY(11)
+ INTERNAL_PHY(12)
+ INTERNAL_PHY(13)
+ INTERNAL_PHY(14)
+ INTERNAL_PHY(15)
+
+ EXTERNAL_SFP_PHY_FULL(24, 0)
+ EXTERNAL_SFP_PHY_FULL(25, 1)
+ EXTERNAL_SFP_PHY_FULL(26, 2)
+ EXTERNAL_SFP_PHY_FULL(27, 3)
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ SWITCH_PORT(0, 1, qsgmii)
+ SWITCH_PORT(1, 2, qsgmii)
+ SWITCH_PORT(2, 3, qsgmii)
+ SWITCH_PORT(3, 4, qsgmii)
+ SWITCH_PORT(4, 5, qsgmii)
+ SWITCH_PORT(5, 6, qsgmii)
+ SWITCH_PORT(6, 7, qsgmii)
+ SWITCH_PORT(7, 8, qsgmii)
+
+ SWITCH_PORT(8, 9, internal)
+ SWITCH_PORT(9, 10, internal)
+ SWITCH_PORT(10, 11, internal)
+ SWITCH_PORT(11, 12, internal)
+ SWITCH_PORT(12, 13, internal)
+ SWITCH_PORT(13, 14, internal)
+ SWITCH_PORT(14, 15, internal)
+ SWITCH_PORT(15, 16, internal)
+
+ SWITCH_PORT(24, 17, qsgmii)
+ SWITCH_PORT(25, 18, qsgmii)
+ SWITCH_PORT(26, 19, qsgmii)
+ SWITCH_PORT(27, 20, qsgmii)
+
+ port@28 {
+ ethernet = <ðernet0>;
+ reg = <28>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
projects / openwrt / staging / stintel.git / blobdiff