treewide: remove files for building 5.10 kernel

[openwrt/staging/ldir.git] / target / linux / realtek / dts-5.10 / rtl8382_zyxel_gs1900-24hp-v2.dts

diff --git a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts b/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts
deleted file mode 100644 (file)
index 7b6a9a1..0000000
--- a/target/linux/realtek/dts-5.10/rtl8382_zyxel_gs1900-24hp-v2.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl8380_zyxel_gs1900.dtsi"
-
-/ {
-       compatible = "zyxel,gs1900-24hp-v2", "realtek,rtl838x-soc";
-       model = "ZyXEL GS1900-24HP v2 Switch";
-
-       /* i2c of the left SFP cage: port 25 */
-       i2c0: i2c-gpio-0 {
-               compatible = "i2c-gpio";
-               sda-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-               scl-gpios = <&gpio1 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-               i2c-gpio,delay-us = <2>;
-               #address-cells = <1>;
-               #size-cells = <0>;
-       };
-
-       sfp0: sfp-p25 {
-               compatible = "sff,sfp";
-               i2c-bus = <&i2c0>;
-               los-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-               tx-fault-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-               mod-def0-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
-               tx-disable-gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-       };
-
-       /* i2c of the right SFP cage: port 26 */
-       i2c1: i2c-gpio-1 {
-               compatible = "i2c-gpio";
-               sda-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-               scl-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-               i2c-gpio,delay-us = <2>;
-               #address-cells = <1>;
-               #size-cells = <0>;
-       };
-
-       sfp1: sfp-p26 {
-               compatible = "sff,sfp";
-               i2c-bus = <&i2c1>;
-               los-gpio = <&gpio1 33 GPIO_ACTIVE_HIGH>;
-               tx-fault-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-               mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>;
-               tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-       };
-};
-
-&uart1 {
-       status = "okay";
-};
-
-&mdio {
-       EXTERNAL_PHY(0)
-       EXTERNAL_PHY(1)
-       EXTERNAL_PHY(2)
-       EXTERNAL_PHY(3)
-       EXTERNAL_PHY(4)
-       EXTERNAL_PHY(5)
-       EXTERNAL_PHY(6)
-       EXTERNAL_PHY(7)
-
-       EXTERNAL_PHY(16)
-       EXTERNAL_PHY(17)
-       EXTERNAL_PHY(18)
-       EXTERNAL_PHY(19)
-       EXTERNAL_PHY(20)
-       EXTERNAL_PHY(21)
-       EXTERNAL_PHY(22)
-       EXTERNAL_PHY(23)
-
-       INTERNAL_PHY(24)
-       INTERNAL_PHY(26)
-};
-
-&switch0 {
-       ports {
-               SWITCH_PORT(0, 1, qsgmii)
-               SWITCH_PORT(1, 2, qsgmii)
-               SWITCH_PORT(2, 3, qsgmii)
-               SWITCH_PORT(3, 4, qsgmii)
-               SWITCH_PORT(4, 5, qsgmii)
-               SWITCH_PORT(5, 6, qsgmii)
-               SWITCH_PORT(6, 7, qsgmii)
-               SWITCH_PORT(7, 8, qsgmii)
-
-               SWITCH_PORT(8, 9, internal)
-               SWITCH_PORT(9, 10, internal)
-               SWITCH_PORT(10, 11, internal)
-               SWITCH_PORT(11, 12, internal)
-               SWITCH_PORT(12, 13, internal)
-               SWITCH_PORT(13, 14, internal)
-               SWITCH_PORT(14, 15, internal)
-               SWITCH_PORT(15, 16, internal)
-
-               SWITCH_PORT(16, 17, qsgmii)
-               SWITCH_PORT(17, 18, qsgmii)
-               SWITCH_PORT(18, 19, qsgmii)
-               SWITCH_PORT(19, 20, qsgmii)
-               SWITCH_PORT(20, 21, qsgmii)
-               SWITCH_PORT(21, 22, qsgmii)
-               SWITCH_PORT(22, 23, qsgmii)
-               SWITCH_PORT(23, 24, qsgmii)
-
-
-               port@24 {
-                       reg = <24>;
-                       label = "lan25";
-                       phy-mode = "1000base-x";
-                       managed = "in-band-status";
-                       sfp = <&sfp0>;
-               };
-
-               port@26 {
-                       reg = <26>;
-                       label = "lan26";
-                       phy-mode = "1000base-x";
-                       managed = "in-band-status";
-                       sfp = <&sfp1>;
-               };
-       };
-};