rockchip: switch to kernel 6.6

[openwrt/openwrt.git] / target / linux / rockchip / patches-6.1 / 028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch

diff --git a/target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch b/target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch
deleted file mode 100644 (file)
index da02c4c..0000000
--- a/target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001
-From: Jonas Karlman <jonas@kwiboo.se>
-Date: Mon, 24 Jul 2023 14:52:16 +0000
-Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
-
-Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
-pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
-seen on page 8 of the schematic [1].
-
-pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
-vcc3v3_minipcie regulator is instead related to pcie30x1.
-
-The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
-
-Use correct regulator vcc3v3_minipcie for pcie30x1.
-
-[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
-
-Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
-Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
-Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -47,6 +47,9 @@
-               vin-supply = <&vcc5v0_sys>;
-       };
- 
-+      /* actually fed by vcc5v0_sys, dependent
-+       * on pi6c clock generator
-+       */
-       vcc3v3_minipcie: vcc3v3-minipcie-regulator {
-               compatible = "regulator-fixed";
-               enable-active-high;
-@@ -54,9 +57,9 @@
-               pinctrl-names = "default";
-               pinctrl-0 = <&minipcie_enable_h>;
-               regulator-name = "vcc3v3_minipcie";
--              regulator-min-microvolt = <5000000>;
--              regulator-max-microvolt = <5000000>;
--              vin-supply = <&vcc5v0_sys>;
-+              regulator-min-microvolt = <3300000>;
-+              regulator-max-microvolt = <3300000>;
-+              vin-supply = <&vcc3v3_pi6c_05>;
-       };
- 
-       vcc3v3_ngff: vcc3v3-ngff-regulator {
-@@ -71,9 +74,6 @@
-               vin-supply = <&vcc5v0_sys>;
-       };
- 
--      /* actually fed by vcc5v0_sys, dependent
--       * on pi6c clock generator
--       */
-       vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
-               compatible = "regulator-fixed";
-               enable-active-high;
-@@ -83,7 +83,7 @@
-               regulator-name = "vcc3v3_pcie30x1";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
--              vin-supply = <&vcc3v3_pi6c_05>;
-+              vin-supply = <&vcc5v0_sys>;
-       };
- 
-       vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
-@@ -117,7 +117,7 @@
-       pinctrl-names = "default";
-       pinctrl-0 = <&pcie30x1m0_pins>;
-       reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
--      vpcie3v3-supply = <&vcc3v3_pcie30x1>;
-+      vpcie3v3-supply = <&vcc3v3_minipcie>;
-       status = "okay";
- };
-