+++ /dev/null
-/*
- * Copyright (c) 2004-2006 Atheros Communications Inc.
- * All rights reserved.
- *
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- *
- * Software distributed under the License is distributed on an "AS
- * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- * implied. See the License for the specific language governing
- * rights and limitations under the License.
- *
- *
- *
- */
-
-#ifndef _ATHDRV_LINUX_H
-#define _ATHDRV_LINUX_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/*
- * There are two types of ioctl's here: Standard ioctls and
- * eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed
- * off of the single ioctl command, AR6000_IOCTL_EXTENDED. The
- * arguments for every XIOCTL starts with a 32-bit command word
- * that is used to select which extended ioctl is in use. After
- * the command word are command-specific arguments.
- */
-
-/* Linux standard Wireless Extensions, private ioctl interfaces */
-#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0)
-#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1)
-#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+2)
-#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+3)
-#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+4)
-#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5)
-#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+6)
-#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+7)
-//#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+7)
-#define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+8)
-//#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10)
-#define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+9)
-
-
-
-/* ====WMI Ioctls==== */
-/*
- *
- * Many ioctls simply provide WMI services to application code:
- * an application makes such an ioctl call with a set of arguments
- * that are packaged into the corresponding WMI message, and sent
- * to the Target.
- */
-
-#define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+10)
-/*
- * arguments:
- * ar6000_version *revision
- */
-
-#define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+11)
-/*
- * arguments:
- * WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
- * uses: WMI_SET_POWER_MODE_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+12)
-/*
- * arguments:
- * WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
- * uses: WMI_SET_SCAN_PARAMS_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+13)
-/*
- * arguments:
- * UINT32 listenInterval
- * uses: WMI_SET_LISTEN_INT_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+14)
-/*
- * arguments:
- * WMI_BSS_FILTER filter (see include/wmi.h)
- * uses: WMI_SET_BSS_FILTER_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16)
-/*
- * arguments:
- * WMI_CHANNEL_PARAMS_CMD chParams
- * uses: WMI_SET_CHANNEL_PARAMS_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17)
-/*
- * arguments:
- * WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
- * uses: WMI_SETPROBED_SSID_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18)
-/*
- * arguments:
- * WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
- * uses: WMI_SET_POWER_PARAMS_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19)
-/*
- * arguments:
- * WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
- * uses: WMI_ADD_BAD_AP_CMDID
- */
-
-#define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20)
-/*
- * arguments:
- * ar6000_queuereq queueRequest (see below)
- */
-
-#define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21)
-/*
- * arguments:
- * WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
- * uses: WMI_CREATE_PSTREAM_CMDID
- */
-
-#define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22)
-/*
- * arguments:
- * WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
- * uses: WMI_DELETE_PSTREAM_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23)
-/*
- * arguments:
- * WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
- * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
-/*
- * arguments:
- * WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
- * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
- */
-
-#define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25)
-/*
- * arguments:
- * TARGET_STATS *targetStats (see below)
- * uses: WMI_GET_STATISTICS_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26)
-/*
- * arguments:
- * WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
- * uses: WMI_SET_ASSOC_INFO_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27)
-/*
- * arguments:
- * WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
- * uses: WMI_SET_ACCESS_PARAMS_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28)
-/*
- * arguments:
- * UINT32 beaconMissTime
- * uses: WMI_SET_BMISS_TIME_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29)
-/*
- * arguments:
- * WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
- * uses: WMI_SET_DISC_TIMEOUT_CMDID
- */
-
-#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30)
-/*
- * arguments:
- * WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
- * uses: WMI_SET_IBSS_PM_CAPS_CMDID
- */
-
-/*
- * There is a very small space available for driver-private
- * wireless ioctls. In order to circumvent this limitation,
- * we multiplex a bunch of ioctls (XIOCTLs) on top of a
- * single AR6000_IOCTL_EXTENDED ioctl.
- */
-#define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31)
-
-
-/* ====BMI Extended Ioctls==== */
-
-#define AR6000_XIOCTL_BMI_DONE 1
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
- * uses: BMI_DONE
- */
-
-#define AR6000_XIOCTL_BMI_READ_MEMORY 2
-/*
- * arguments:
- * union {
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
- * UINT32 address
- * UINT32 length
- * }
- * char results[length]
- * }
- * uses: BMI_READ_MEMORY
- */
-
-#define AR6000_XIOCTL_BMI_WRITE_MEMORY 3
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
- * UINT32 address
- * UINT32 length
- * char data[length]
- * uses: BMI_WRITE_MEMORY
- */
-
-#define AR6000_XIOCTL_BMI_EXECUTE 4
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
- * UINT32 TargetAddress
- * UINT32 parameter
- * uses: BMI_EXECUTE
- */
-
-#define AR6000_XIOCTL_BMI_SET_APP_START 5
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
- * UINT32 TargetAddress
- * uses: BMI_SET_APP_START
- */
-
-#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6
-/*
- * arguments:
- * union {
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
- * UINT32 TargetAddress, 32-bit aligned
- * }
- * UINT32 result
- * }
- * uses: BMI_READ_SOC_REGISTER
- */
-
-#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7
-/*
- * arguments:
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
- * UINT32 TargetAddress, 32-bit aligned
- * UINT32 newValue
- * }
- * uses: BMI_WRITE_SOC_REGISTER
- */
-
-#define AR6000_XIOCTL_BMI_TEST 8
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
- * UINT32 address
- * UINT32 length
- * UINT32 count
- */
-
-
-
-/* Historical Host-side DataSet support */
-#define AR6000_XIOCTL_UNUSED9 9
-#define AR6000_XIOCTL_UNUSED10 10
-#define AR6000_XIOCTL_UNUSED11 11
-
-/* ====Misc Extended Ioctls==== */
-
-#define AR6000_XIOCTL_FORCE_TARGET_RESET 12
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
- */
-
-
-#ifdef HTC_RAW_INTERFACE
-/* HTC Raw Interface Ioctls */
-#define AR6000_XIOCTL_HTC_RAW_OPEN 13
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
- */
-
-#define AR6000_XIOCTL_HTC_RAW_CLOSE 14
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
- */
-
-#define AR6000_XIOCTL_HTC_RAW_READ 15
-/*
- * arguments:
- * union {
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
- * UINT32 mailboxID
- * UINT32 length
- * }
- * results[length]
- * }
- */
-
-#define AR6000_XIOCTL_HTC_RAW_WRITE 16
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
- * UINT32 mailboxID
- * UINT32 length
- * char buffer[length]
- */
-#endif /* HTC_RAW_INTERFACE */
-
-#define AR6000_XIOCTL_CHECK_TARGET_READY 17
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
- */
-
-
-
-/* ====GPIO (General Purpose I/O) Extended Ioctls==== */
-
-#define AR6000_XIOCTL_GPIO_OUTPUT_SET 18
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
- * ar6000_gpio_output_set_cmd_s (see below)
- * uses: WMIX_GPIO_OUTPUT_SET_CMDID
- */
-
-#define AR6000_XIOCTL_GPIO_INPUT_GET 19
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
- * uses: WMIX_GPIO_INPUT_GET_CMDID
- */
-
-#define AR6000_XIOCTL_GPIO_REGISTER_SET 20
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
- * ar6000_gpio_register_cmd_s (see below)
- * uses: WMIX_GPIO_REGISTER_SET_CMDID
- */
-
-#define AR6000_XIOCTL_GPIO_REGISTER_GET 21
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
- * ar6000_gpio_register_cmd_s (see below)
- * uses: WMIX_GPIO_REGISTER_GET_CMDID
- */
-
-#define AR6000_XIOCTL_GPIO_INTR_ACK 22
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
- * ar6000_cpio_intr_ack_cmd_s (see below)
- * uses: WMIX_GPIO_INTR_ACK_CMDID
- */
-
-#define AR6000_XIOCTL_GPIO_INTR_WAIT 23
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
- */
-
-
-
-/* ====more wireless commands==== */
-
-#define AR6000_XIOCTL_SET_ADHOC_BSSID 24
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
- * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
- */
-
-#define AR6000_XIOCTL_SET_OPT_MODE 25
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
- * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
- * uses: WMI_SET_OPT_MODE_CMDID
- */
-
-#define AR6000_XIOCTL_OPT_SEND_FRAME 26
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
- * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
- * uses: WMI_OPT_TX_FRAME_CMDID
- */
-
-#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL 27
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL)
- * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
- * uses: WMI_SET_BEACON_INT_CMDID
- */
-
-
-#define IEEE80211_IOCTL_SETAUTHALG 28
-
-
-#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
- * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
- * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
- */
-
-
-#define AR6000_XIOCTL_SET_MAX_SP 30
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
- * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
- * uses: WMI_SET_MAX_SP_LEN_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31
-
-#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32
-
-#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33
-
-
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
- * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
- * WMI_SET_POWERSAVE_TIMERS_CMDID
- */
-
-#define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
- */
-
-#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35
-typedef enum {
- WLAN_DISABLED,
- WLAN_ENABLED
-} AR6000_WLAN_STATE;
-/*
- * arguments:
- * enable/disable
- */
-
-#define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36
-
-#define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37
-/*
- * arguments:
- * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
- * uses: WMI_SET_RETRY_LIMITS_CMDID
- */
-
-#ifdef CONFIG_HOST_TCMD_SUPPORT
-/* ====extended commands for radio test ==== */
-
-#define AR6000_XIOCTL_TCMD_CONT_TX 38
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
- * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
- * uses: WMI_TCMD_CONT_TX_CMDID
- */
-
-#define AR6000_XIOCTL_TCMD_CONT_RX 39
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
- * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
- * uses: WMI_TCMD_CONT_RX_CMDID
- */
-
-#define AR6000_XIOCTL_TCMD_PM 40
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
- * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
- * uses: WMI_TCMD_PM_CMDID
- */
-
-#endif /* CONFIG_HOST_TCMD_SUPPORT */
-
-#define AR6000_XIOCTL_WMI_STARTSCAN 41
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
- * UINT8 scanType
- * UINT8 scanConnected
- * A_BOOL forceFgScan
- * uses: WMI_START_SCAN_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_SETFIXRATES 42
-
-#define AR6000_XIOCTL_WMI_GETFIXRATES 43
-
-
-#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44
-/*
- * arguments:
- * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
- * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_CLR_RSSISNR 45
-/*
- * arguments:
- * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
- * uses: WMI_CLR_RSSISNR_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46
-/*
- * arguments:
- * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
- * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_SET_RTS 47
-/*
- * arguments:
- * WMI_SET_RTS_MODE_CMD (see include/wmi.h)
- * uses: WMI_SET_RTS_MODE_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48
-
-#define AR6000_XIOCTL_WMI_SET_AUTHMODE 49
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
- * UINT8 mode
- * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50
-
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
- * UINT8 mode
- * uses: WMI_SET_WMM_CMDID
- */
-#define AR6000_XIOCTL_WMI_SET_WMM 51
-
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
- * UINT32 frequency
- * UINT8 threshold
- */
-#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52
-
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
- * UINT32 cookie
- */
-#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53
-
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
- * UINT32 regDomain
- */
-#define AR6000_XIOCTL_WMI_GET_RD 54
-
-#define AR6000_XIOCTL_DIAG_READ 55
-
-#define AR6000_XIOCTL_DIAG_WRITE 56
-
-/*
- * arguments cmd (AR6000_XIOCTL_SET_TXOP)
- * WMI_TXOP_CFG txopEnable
- */
-#define AR6000_XIOCTL_WMI_SET_TXOP 57
-
-#ifdef USER_KEYS
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
- * UINT32 keyOpCtrl
- * uses AR6000_USER_SETKEYS_INFO
- */
-#define AR6000_XIOCTL_USER_SETKEYS 58
-#endif /* USER_KEYS */
-
-#define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59
-/*
- * arguments:
- * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
- * UINT8 keepaliveInterval
- * uses: WMI_SET_KEEPALIVE_CMDID
- */
-
-#define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60
-/*
- * arguments:
- * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
- * UINT8 keepaliveInterval
- * A_BOOL configured
- * uses: WMI_GET_KEEPALIVE_CMDID
- */
-
-/* ====ROM Patching Extended Ioctls==== */
-
-#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61
-/*
- * arguments:
- * union {
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
- * UINT32 ROM Address
- * UINT32 RAM Address
- * UINT32 number of bytes
- * UINT32 activate? (0 or 1)
- * }
- * A_UINT32 resulting rompatch ID
- * }
- * uses: BMI_ROMPATCH_INSTALL
- */
-
-#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62
-/*
- * arguments:
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
- * UINT32 rompatch ID
- * }
- * uses: BMI_ROMPATCH_UNINSTALL
- */
-
-#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63
-/*
- * arguments:
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
- * UINT32 rompatch count
- * UINT32 rompatch IDs[rompatch count]
- * }
- * uses: BMI_ROMPATCH_ACTIVATE
- */
-
-#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64
-/*
- * arguments:
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
- * UINT32 rompatch count
- * UINT32 rompatch IDs[rompatch count]
- * }
- * uses: BMI_ROMPATCH_DEACTIVATE
- */
-
-#define AR6000_XIOCTL_WMI_SET_APPIE 65
-/*
- * arguments:
- * struct {
- * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
- * UINT32 app_frmtype;
- * UINT32 app_buflen;
- * UINT8 app_buf[];
- * }
- */
-#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66
-/*
- * arguments:
- * A_UINT32 filter_type;
- */
-
-#define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67
-
-#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68
-
-#define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70
-/*
- * arguments:
- * A_UINT32 wsc_status;
- * (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
- */
-
-/*
- * arguments:
- * struct {
- * A_UINT8 streamType;
- * A_UINT8 status;
- * }
- * uses: WMI_SET_BT_STATUS_CMDID
- */
-#define AR6000_XIOCTL_WMI_SET_BT_STATUS 71
-
-/*
- * arguments:
- * struct {
- * A_UINT8 paramType;
- * union {
- * A_UINT8 noSCOPkts;
- * BT_PARAMS_A2DP a2dpParams;
- * BT_COEX_REGS regs;
- * };
- * }
- * uses: WMI_SET_BT_PARAM_CMDID
- */
-#define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72
-
-#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73
-#define AR6000_XIOCTL_WMI_SET_WOW_MODE 74
-#define AR6000_XIOCTL_WMI_GET_WOW_LIST 75
-#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76
-#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77
-
-
-
-#define AR6000_XIOCTL_TARGET_INFO 78
-/*
- * arguments:
- * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
- * A_UINT32 TargetVersion (returned)
- * A_UINT32 TargetType (returned)
- * (See also bmi_msg.h target_ver and target_type)
- */
-
-#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79
-/*
- * arguments:
- * none
- */
-
-#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80
-/*
- * This ioctl is used to emulate traffic activity
- * timeouts. Activity/inactivity will trigger the driver
- * to re-balance credits.
- *
- * arguments:
- * ar6000_traffic_activity_change
- */
-
-#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81
-/*
- * This ioctl is used to set the connect control flags
- *
- * arguments:
- * A_UINT32 connectCtrlFlags
- */
-
-#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82
-/*
- * This IOCTL sets any Authentication,Key Management and Protection
- * related parameters. This is used along with the information set in
- * Connect Command.
- * Currently this enables Multiple PMKIDs to an AP.
- *
- * arguments:
- * struct {
- * A_UINT32 akmpInfo;
- * }
- * uses: WMI_SET_AKMP_PARAMS_CMD
- */
-
-#define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83
-
-#define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84
-/*
- * This IOCTL is used to set a list of PMKIDs. This list of
- * PMKIDs is used in the [Re]AssocReq Frame. This list is used
- * only if the MultiPMKID option is enabled via the
- * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL.
- *
- * arguments:
- * struct {
- * A_UINT32 numPMKID;
- * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
- * }
- * uses: WMI_SET_PMKIDLIST_CMD
- */
-
-/* Historical DSETPATCH support for INI patches */
-#define AR6000_XIOCTL_UNUSED90 90
-
-
-
-/* used by AR6000_IOCTL_WMI_GETREV */
-struct ar6000_version {
- A_UINT32 host_ver;
- A_UINT32 target_ver;
-};
-
-/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
-struct ar6000_queuereq {
- A_UINT8 trafficClass;
- A_UINT16 activeTsids;
-};
-
-/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
-typedef struct targetStats_t {
- A_UINT64 tx_packets;
- A_UINT64 tx_bytes;
- A_UINT64 tx_unicast_pkts;
- A_UINT64 tx_unicast_bytes;
- A_UINT64 tx_multicast_pkts;
- A_UINT64 tx_multicast_bytes;
- A_UINT64 tx_broadcast_pkts;
- A_UINT64 tx_broadcast_bytes;
- A_UINT64 tx_rts_success_cnt;
- A_UINT64 tx_packet_per_ac[4];
-
- A_UINT64 tx_errors;
- A_UINT64 tx_failed_cnt;
- A_UINT64 tx_retry_cnt;
- A_UINT64 tx_rts_fail_cnt;
- A_INT32 tx_unicast_rate;
- A_UINT64 rx_packets;
- A_UINT64 rx_bytes;
- A_UINT64 rx_unicast_pkts;
- A_UINT64 rx_unicast_bytes;
- A_UINT64 rx_multicast_pkts;
- A_UINT64 rx_multicast_bytes;
- A_UINT64 rx_broadcast_pkts;
- A_UINT64 rx_broadcast_bytes;
- A_UINT64 rx_fragment_pkt;
-
- A_UINT64 rx_errors;
- A_UINT64 rx_crcerr;
- A_UINT64 rx_key_cache_miss;
- A_UINT64 rx_decrypt_err;
- A_UINT64 rx_duplicate_frames;
- A_INT32 rx_unicast_rate;
-
- A_UINT64 tkip_local_mic_failure;
- A_UINT64 tkip_counter_measures_invoked;
- A_UINT64 tkip_replays;
- A_UINT64 tkip_format_errors;
- A_UINT64 ccmp_format_errors;
- A_UINT64 ccmp_replays;
-
- A_UINT64 power_save_failure_cnt;
- A_INT16 noise_floor_calibation;
-
- A_UINT64 cs_bmiss_cnt;
- A_UINT64 cs_lowRssi_cnt;
- A_UINT64 cs_connect_cnt;
- A_UINT64 cs_disconnect_cnt;
- A_UINT8 cs_aveBeacon_snr;
- A_INT16 cs_aveBeacon_rssi;
- A_UINT8 cs_lastRoam_msec;
- A_UINT8 cs_snr;
- A_INT16 cs_rssi;
-
- A_UINT32 lq_val;
-
- A_UINT32 wow_num_pkts_dropped;
- A_UINT8 wow_num_host_pkt_wakeups;
- A_UINT8 wow_num_host_event_wakeups;
- A_UINT16 wow_num_events_discarded;
-
-}TARGET_STATS;
-
-typedef struct targetStats_cmd_t {
- TARGET_STATS targetStats;
- int clearStats;
-} TARGET_STATS_CMD;
-
-/* used by AR6000_XIOCTL_USER_SETKEYS */
-
-/*
- * Setting this bit to 1 doesnot initialize the RSC on the firmware
- */
-#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1
-#define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002
-
-typedef struct {
- A_UINT32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */
-} AR6000_USER_SETKEYS_INFO;
-
-
-/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
-struct ar6000_gpio_output_set_cmd_s {
- A_UINT32 set_mask;
- A_UINT32 clear_mask;
- A_UINT32 enable_mask;
- A_UINT32 disable_mask;
-};
-
-/*
- * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
- */
-struct ar6000_gpio_register_cmd_s {
- A_UINT32 gpioreg_id;
- A_UINT32 value;
-};
-
-/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
-struct ar6000_gpio_intr_ack_cmd_s {
- A_UINT32 ack_mask;
-};
-
-/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
-struct ar6000_gpio_intr_wait_cmd_s {
- A_UINT32 intr_mask;
- A_UINT32 input_values;
-};
-
-/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
-typedef struct ar6000_dbglog_module_config_s {
- A_UINT32 valid;
- A_UINT16 mmask;
- A_UINT16 tsr;
- A_BOOL rep;
- A_UINT16 size;
-} DBGLOG_MODULE_CONFIG;
-
-typedef struct user_rssi_thold_t {
- A_INT16 tag;
- A_INT16 rssi;
-} USER_RSSI_THOLD;
-
-typedef struct user_rssi_params_t {
- A_UINT8 weight;
- A_UINT32 pollTime;
- USER_RSSI_THOLD tholds[12];
-} USER_RSSI_PARAMS;
-
-/*
- * Host driver may have some config parameters. Typically, these
- * config params are one time config parameters. These could
- * correspond to any of the underlying modules. Host driver exposes
- * an api for the underlying modules to get this config.
- */
-#define AR6000_DRIVER_CFG_BASE 0x8000
-
-/* Should driver perform wlan node caching? */
-#define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001
-/*Should we log raw WMI msgs */
-#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002
-
-/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
-struct ar6000_diag_window_cmd_s {
- unsigned int addr;
- unsigned int value;
-};
-
-
-struct ar6000_traffic_activity_change {
- A_UINT32 StreamID; /* stream ID to indicate activity change */
- A_UINT32 Active; /* active (1) or inactive (0) */
-};
-
-#ifdef __cplusplus
-}
-#endif
-#endif
projects / openwrt / svn-archive / archive.git / blobdiff