+++ /dev/null
-/*
- * Copyright (c) 2004-2007 Atheros Communications Inc.
- * All rights reserved.
- *
- * $ATH_LICENSE_HOSTSDK0_C$
- *
- */
-
-#ifndef __TARGADDRS_H__
-#define __TARGADDRS_H__
-#if defined(AR6001)
-#include "AR6001/addrs.h"
-#endif
-#if defined(AR6002)
-#include "AR6002/addrs.h"
-#endif
-
-/*
- * AR6K option bits, to enable/disable various features.
- * By default, all option bits are 0.
- * These bits can be set in LOCAL_SCRATCH register 0.
- */
-#define AR6K_OPTION_BMI_DISABLE 0x01 /* Disable BMI comm with Host */
-#define AR6K_OPTION_SERIAL_ENABLE 0x02 /* Enable serial port msgs */
-#define AR6K_OPTION_WDT_DISABLE 0x04 /* WatchDog Timer override */
-#define AR6K_OPTION_SLEEP_DISABLE 0x08 /* Disable system sleep */
-#define AR6K_OPTION_STOP_BOOT 0x10 /* Stop boot processes (for ATE) */
-#define AR6K_OPTION_ENABLE_NOANI 0x20 /* Operate without ANI */
-#define AR6K_OPTION_DSET_DISABLE 0x40 /* Ignore DataSets */
-#define AR6K_OPTION_IGNORE_FLASH 0x80 /* Ignore flash during bootup */
-
-/*
- * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
- * host_interest structure. It must match the address of the _host_interest
- * symbol (see linker script).
- *
- * Host Interest is shared between Host and Target in order to coordinate
- * between the two, and is intended to remain constant (with additions only
- * at the end) across software releases.
- */
-#define AR6001_HOST_INTEREST_ADDRESS 0x80000600
-#define AR6002_HOST_INTEREST_ADDRESS 0x00500400
-
-#define HOST_INTEREST_MAX_SIZE 0x100
-
-#if !defined(__ASSEMBLER__)
-struct register_dump_s;
-struct dbglog_hdr_s;
-
-/*
- * These are items that the Host may need to access
- * via BMI or via the Diagnostic Window. The position
- * of items in this structure must remain constant
- * across firmware revisions!
- *
- * Types for each item must be fixed size across
- * target and host platforms.
- *
- * More items may be added at the end.
- */
-struct host_interest_s {
- /*
- * Pointer to application-defined area, if any.
- * Set by Target application during startup.
- */
- A_UINT32 hi_app_host_interest; /* 0x00 */
-
- /* Pointer to register dump area, valid after Target crash. */
- A_UINT32 hi_failure_state; /* 0x04 */
-
- /* Pointer to debug logging header */
- A_UINT32 hi_dbglog_hdr; /* 0x08 */
-
- /* Indicates whether or not flash is present on Target.
- * NB: flash_is_present indicator is here not just
- * because it might be of interest to the Host; but
- * also because it's set early on by Target's startup
- * asm code and we need it to have a special RAM address
- * so that it doesn't get reinitialized with the rest
- * of data.
- */
- A_UINT32 hi_flash_is_present; /* 0x0c */
-
- /*
- * General-purpose flag bits, similar to AR6000_OPTION_* flags.
- * Can be used by application rather than by OS.
- */
- A_UINT32 hi_option_flag; /* 0x10 */
-
- /*
- * Boolean that determines whether or not to
- * display messages on the serial port.
- */
- A_UINT32 hi_serial_enable; /* 0x14 */
-
- /* Start address of Flash DataSet index, if any */
- A_UINT32 hi_dset_list_head; /* 0x18 */
-
- /* Override Target application start address */
- A_UINT32 hi_app_start; /* 0x1c */
-
- /* Clock and voltage tuning */
- A_UINT32 hi_skip_clock_init; /* 0x20 */
- A_UINT32 hi_core_clock_setting; /* 0x24 */
- A_UINT32 hi_cpu_clock_setting; /* 0x28 */
- A_UINT32 hi_system_sleep_setting; /* 0x2c */
- A_UINT32 hi_xtal_control_setting; /* 0x30 */
- A_UINT32 hi_pll_ctrl_setting_24ghz; /* 0x34 */
- A_UINT32 hi_pll_ctrl_setting_5ghz; /* 0x38 */
- A_UINT32 hi_ref_voltage_trim_setting; /* 0x3c */
- A_UINT32 hi_clock_info; /* 0x40 */
-
- /*
- * Flash configuration overrides, used only
- * when firmware is not executing from flash.
- * (When using flash, modify the global variables
- * with equivalent names.)
- */
- A_UINT32 hi_bank0_addr_value; /* 0x44 */
- A_UINT32 hi_bank0_read_value; /* 0x48 */
- A_UINT32 hi_bank0_write_value; /* 0x4c */
- A_UINT32 hi_bank0_config_value; /* 0x50 */
-
- /* Pointer to Board Data */
- A_UINT32 hi_board_data; /* 0x54 */
- A_UINT32 hi_board_data_initialized; /* 0x58 */
-
- A_UINT32 hi_dset_RAM_index_table; /* 0x5c */
-
- A_UINT32 hi_desired_baud_rate; /* 0x60 */
- A_UINT32 hi_dbglog_config; /* 0x64 */
- A_UINT32 hi_end_RAM_reserve_sz; /* 0x68 */
- A_UINT32 hi_mbox_io_block_sz; /* 0x6c */
-
- A_UINT32 hi_num_bpatch_streams; /* 0x70 */
- A_UINT32 hi_mbox_isr_yield_limit; /* 0x74 */
-
- A_UINT32 hi_refclk_hz; /* 0x78 */
-};
-
-/* Bits defined in hi_option_flag */
-#define HI_OPTION_TIMER_WAR 1 /* not really used */
-
-/*
- * Intended for use by Host software, this macro returns the Target RAM
- * address of any item in the host_interest structure.
- * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
- */
-#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
- ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
-
-#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
- ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
-
-
-#endif /* !__ASSEMBLER__ */
-
-#endif /* __TARGADDRS_H__ */
projects / openwrt / openwrt.git / blobdiff