add support for target 3c24xx (more known as Openmoko GTA02 "Freerunner") and merge...

[openwrt/openwrt.git] / target / linux / s3c24xx / patches / 0042-qt2410-cs8900.patch.patch

diff --git a/target/linux/s3c24xx/patches/0042-qt2410-cs8900.patch.patch b/target/linux/s3c24xx/patches/0042-qt2410-cs8900.patch.patch
new file mode 100755 (executable)
index 0000000..bca79a8
--- /dev/null
+++ b/target/linux/s3c24xx/patches/0042-qt2410-cs8900.patch.patch
@@ -0,0 +1,74 @@
+From 0ed3724f733b7049d5efea9c44f5e6f0c6beae06 Mon Sep 17 00:00:00 2001
+From: mokopatches <mokopatches@openmoko.org>
+Date: Fri, 25 Jul 2008 22:21:22 +0100
+Subject: [PATCH] qt2410-cs8900.patch
+
+---
+ drivers/net/Kconfig  |    4 ++--
+ drivers/net/cs89x0.c |   14 +++++++++++++-
+ 2 files changed, 15 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index f4182cf..8caa04a 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -1248,7 +1248,7 @@ source "drivers/net/ibm_newemac/Kconfig"
+ 
+ config NET_PCI
+       bool "EISA, VLB, PCI and on board controllers"
+-      depends on ISA || EISA || PCI
++      depends on ISA || EISA || PCI || MACH_QT2410
+       help
+         This is another class of network cards which attach directly to the
+         bus. If you have one of those, say Y and read the Ethernet-HOWTO,
+@@ -1410,7 +1410,7 @@ config FORCEDETH_NAPI
+ 
+ config CS89x0
+       tristate "CS89x0 support"
+-      depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X)
++      depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_QT2410)
+       ---help---
+         Support for CS89x0 chipset based Ethernet cards. If you have a
+         network (Ethernet) card of this type, say Y and read the
+diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
+index fba87ab..d94a790 100644
+--- a/drivers/net/cs89x0.c
++++ b/drivers/net/cs89x0.c
+@@ -194,6 +194,10 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
+ #define CIRRUS_DEFAULT_IRQ    VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
+ static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
+ static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
++#elif defined(CONFIG_MACH_QT2410)
++#include <asm/arch/irqs.h>
++static unsigned int netcard_portlist [] __initdata = { 0xe0000300, 0 };
++static unsigned int cs8900_irq_map[] = { IRQ_EINT9, 0, 0, 0 };
+ #else
+ static unsigned int netcard_portlist[] __used __initdata =
+    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
+@@ -829,6 +833,14 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
+ 
+       printk(" IRQ %d", dev->irq);
+ 
++      dev->dev_addr[0] = 0x00;
++      dev->dev_addr[1] = 0x00;
++      dev->dev_addr[2] = 0xc0;
++      dev->dev_addr[3] = 0xff;
++      dev->dev_addr[4] = 0xee;
++      dev->dev_addr[5] = 0x08;
++      set_mac_address(dev, dev->dev_addr);
++
+ #if ALLOW_DMA
+       if (lp->use_dma) {
+               get_dma_channel(dev);
+@@ -1304,7 +1316,7 @@ net_open(struct net_device *dev)
+       else
+ #endif
+       {
+-#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
++#if !defined(CONFIG_MACH_IXDP2351) && !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X) && !defined(CONFIG_MACH_QT2410)
+               if (((1 << dev->irq) & lp->irq_map) == 0) {
+                       printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
+                                dev->name, dev->irq, lp->irq_map);
+-- 
+1.5.6.3
+