change prefix for kernelpatchbase 2.6.26

[openwrt/staging/florian.git] / target / linux / s3c24xx / patches-2.6.26 / 0227-fix-s3c2410-serial-fwd-ref.patch.patch.patch

diff --git a/target/linux/s3c24xx/patches-2.6.26/0227-fix-s3c2410-serial-fwd-ref.patch.patch.patch b/target/linux/s3c24xx/patches-2.6.26/0227-fix-s3c2410-serial-fwd-ref.patch.patch.patch
deleted file mode 100755 (executable)
index ffc521b..0000000
--- a/target/linux/s3c24xx/patches-2.6.26/0227-fix-s3c2410-serial-fwd-ref.patch.patch.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From 0535fda1958587000a4abe711a50d221e0f82379 Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@openmoko.com>
-Date: Fri, 25 Jul 2008 23:16:57 +0100
-Subject: [PATCH] fix-s3c2410-serial-fwd-ref.patch.patch
-
-Signed-off-by: Andy Green <andy@openmoko.com>
----
- drivers/serial/s3c2410.c |  129 +++++++++++++++++++++++----------------------
- 1 files changed, 66 insertions(+), 63 deletions(-)
-
-diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
-index f20f63b..b4833bd 100644
---- a/drivers/serial/s3c2410.c
-+++ b/drivers/serial/s3c2410.c
-@@ -1167,6 +1167,10 @@ static int s3c24xx_serial_resume(struct platform_device *dev)
- #define s3c24xx_serial_resume  NULL
- #endif
- 
-+static void s3c24xx_serial_force_debug_port_up(void);
-+static void s3c2410_printascii(const char *sz);
-+
-+
- static int s3c24xx_serial_init(struct platform_driver *drv,
-                              struct s3c24xx_uart_info *info)
- {
-@@ -1521,6 +1525,68 @@ static struct platform_driver s3c2440_serial_drv = {
- };
- 
- 
-+static void s3c24xx_serial_force_debug_port_up(void)
-+{
-+      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
-+                                                       CONFIG_DEBUG_S3C_UART];
-+      struct s3c24xx_uart_clksrc *clksrc = NULL;
-+      struct clk *clk = NULL;
-+      unsigned long tmp;
-+
-+      s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200);
-+
-+      tmp = __raw_readl(S3C2410_CLKCON);
-+
-+      /* re-start uart clocks */
-+      tmp |= S3C2410_CLKCON_UART0;
-+      tmp |= S3C2410_CLKCON_UART1;
-+      tmp |= S3C2410_CLKCON_UART2;
-+
-+      __raw_writel(tmp, S3C2410_CLKCON);
-+      udelay(10);
-+
-+      s3c24xx_serial_setsource(&ourport->port, clksrc);
-+
-+      if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
-+              clk_disable(ourport->baudclk);
-+              ourport->baudclk  = NULL;
-+      }
-+
-+      clk_enable(clk);
-+
-+      ourport->clksrc = clksrc;
-+      ourport->baudclk = clk;
-+}
-+
-+static void s3c2410_printascii(const char *sz)
-+{
-+      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
-+                                                       CONFIG_DEBUG_S3C_UART];
-+      struct uart_port *port = &ourport->port;
-+
-+      /* 8 N 1 */
-+      wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3);
-+      /* polling mode */
-+      wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5);
-+      /* disable FIFO */
-+      wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01));
-+      /* fix baud rate */
-+      wr_regl(port, S3C2410_UBRDIV, 26);
-+
-+      while (*sz) {
-+              int timeout = 10000000;
-+
-+              /* spin on it being busy */
-+              while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--)
-+                      ;
-+
-+              /* transmit register */
-+              wr_regl(port, S3C2410_UTXH, *sz);
-+
-+              sz++;
-+      }
-+}
-+
- static inline int s3c2440_serial_init(void)
- {
-       return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
-@@ -1654,69 +1720,6 @@ static struct platform_driver s3c2412_serial_drv = {
-       },
- };
- 
--static void s3c24xx_serial_force_debug_port_up(void)
--{
--      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
--                                                       CONFIG_DEBUG_S3C_UART];
--      struct s3c24xx_uart_clksrc *clksrc = NULL;
--      struct clk *clk = NULL;
--      unsigned long tmp;
--
--      s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200);
--
--      tmp = __raw_readl(S3C2410_CLKCON);
--
--      /* re-start uart clocks */
--      tmp |= S3C2410_CLKCON_UART0;
--      tmp |= S3C2410_CLKCON_UART1;
--      tmp |= S3C2410_CLKCON_UART2;
--
--      __raw_writel(tmp, S3C2410_CLKCON);
--      udelay(10);
--
--      s3c24xx_serial_setsource(&ourport->port, clksrc);
--
--      if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
--              clk_disable(ourport->baudclk);
--              ourport->baudclk  = NULL;
--      }
--
--      clk_enable(clk);
--
--      ourport->clksrc = clksrc;
--      ourport->baudclk = clk;
--}
--
--static void s3c2410_printascii(const char *sz)
--{
--      struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[
--                                                       CONFIG_DEBUG_S3C_UART];
--      struct uart_port *port = &ourport->port;
--
--      /* 8 N 1 */
--      wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3);
--      /* polling mode */
--      wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5);
--      /* disable FIFO */
--      wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01));
--      /* fix baud rate */
--      wr_regl(port, S3C2410_UBRDIV, 26);
--
--      while (*sz) {
--              int timeout = 10000000;
--
--              /* spin on it being busy */
--              while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--)
--                      ;
--
--              /* transmit register */
--              wr_regl(port, S3C2410_UTXH, *sz);
--
--              sz++;
--      }
--}
--
--
- /* s3c24xx_serial_resetport
-  *
-  * wrapper to call the specific reset for this port (reset the fifos
--- 
-1.5.6.3
-