sunxi: remove 3.13 support

[openwrt/svn-archive/archive.git] / target / linux / sunxi / patches-3.13 / 132-dt-sun5i-a13-add-olinuxino-micro.patch

diff --git a/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch b/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch
deleted file mode 100644 (file)
index 93b7252..0000000
--- a/target/linux/sunxi/patches-3.13/132-dt-sun5i-a13-add-olinuxino-micro.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From aad62992a2921436ec7c054f8b80bc916b8cc9d7 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 14 Dec 2013 16:26:17 +0100
-Subject: [PATCH] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board
-
-The A13-OLinuXino-MICRO is a small dev-board with the Allwinner A13 SoC:
-https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino-MICRO/
-
-Features:
-A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
-256 MB RAM (128Mbit x 16)
-5VDC input power supply with own ICs, noise immune design
-1 USB host
-1 USB OTG which can power the board
-SD-card connector for booting the Linux image
-VGA video output
-LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
-Audio output
-Microphone input pads (no connector)
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/Makefile                      |  1 +
- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 68 +++++++++++++++++++++++++
- 2 files changed, 69 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
-       sun4i-a10-hackberry.dtb \
-       sun5i-a10s-olinuxino-micro.dtb \
-       sun5i-a13-olinuxino.dtb \
-+      sun5i-a13-olinuxino-micro.dtb \
-       sun6i-a31-colombus.dtb \
-       sun7i-a20-cubieboard2.dtb \
-       sun7i-a20-cubietruck.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-@@ -0,0 +1,68 @@
-+/*
-+ * Copyright 2012 Maxime Ripard
-+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun5i-a13.dtsi"
-+
-+/ {
-+      model = "Olimex A13-Olinuxino Micro";
-+      compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
-+
-+      soc@01c00000 {
-+              pinctrl@01c20800 {
-+                      led_pins_olinuxinom: led_pins@0 {
-+                              allwinner,pins = "PG9";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <1>;
-+                              allwinner,pull = <0>;
-+                      };
-+              };
-+
-+              uart1: serial@01c28400 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&uart1_pins_b>;
-+                      status = "okay";
-+              };
-+
-+              i2c0: i2c@01c2ac00 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&i2c0_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              i2c1: i2c@01c2b000 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&i2c1_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              i2c2: i2c@01c2b400 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&i2c2_pins_a>;
-+                      status = "okay";
-+              };
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&led_pins_olinuxinom>;
-+
-+              power {
-+                      label = "a13-olinuxino-micro:green:power";
-+                      gpios = <&pio 6 9 0>;
-+                      default-state = "on";
-+              };
-+      };
-+};