sunxi: driver refresh for 3.13

[openwrt/svn-archive/archive.git] / target / linux / sunxi / patches-3.13 / 173-3-dt-sun4i-add-ehci-cubieboard.patch

diff --git a/target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch b/target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch
deleted file mode 100644 (file)
index 7b7daa7..0000000
--- a/target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 875bbd46c296e4b9ed130848bc64be5cf39669c8 Mon Sep 17 00:00:00 2001
-From: arokux <arokux@gmail.com>
-Date: Wed, 18 Sep 2013 22:45:06 +0200
-Subject: [PATCH] ARM: sun4i: dt: Add EHCI bindings to Cubieboard-A10
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
-Conflicts:
-       arch/arm/boot/dts/sun4i-a10-cubieboard.dts
----
- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 46 ++++++++++++++++++++++++++++++
- 1 file changed, 46 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-@@ -77,6 +77,20 @@
-                               allwinner,drive = <1>;
-                               allwinner,pull = <0>;
-                       };
-+
-+                      usb1_vbus_pin: usb1_vbus_pin@0 {
-+                                      allwinner,pins = "PH6";
-+                                      allwinner,function = "gpio_out";
-+                                      allwinner,drive = <0>;
-+                                      allwinner,pull = <2>;
-+                      };
-+
-+                      usb2_vbus_pin: usb2_vbus_pin@0 {
-+                                      allwinner,pins = "PH3";
-+                                      allwinner,function = "gpio_out";
-+                                      allwinner,drive = <0>;
-+                                      allwinner,pull = <2>;
-+                      };
-               };
- 
-               uart0: serial@01c28000 {
-@@ -96,6 +110,16 @@
-                       pinctrl-0 = <&i2c1_pins_a>;
-                       status = "okay";
-               };
-+
-+              ehci0: ehci0@0x01c14000 {
-+                              vbus-supply = <&reg_usb1_vbus>;
-+                              status = "okay";
-+              };
-+
-+              ehci1: ehci1@0x01c1c000 {
-+                              vbus-supply = <&reg_usb2_vbus>;
-+                              status = "okay";
-+              };
-       };
- 
-       leds {
-@@ -128,5 +152,27 @@
-                       gpio = <&pio 1 8 0>;
-                       enable-active-high;
-               };
-+
-+              reg_usb1_vbus: usb1-vbus {
-+                      compatible = "regulator-fixed";
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&usb1_vbus_pin>;
-+                      regulator-name = "usb1-vbus";
-+                      regulator-min-microvolt = <3300000>;
-+                      regulator-max-microvolt = <3300000>;
-+                      enable-active-high;
-+                      gpio = <&pio 7 6 0>;
-+              };
-+
-+              reg_usb2_vbus: usb2-vbus {
-+                      compatible = "regulator-fixed";
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&usb2_vbus_pin>;
-+                      regulator-name = "usb2-vbus";
-+                      regulator-min-microvolt = <3300000>;
-+                      regulator-max-microvolt = <3300000>;
-+                      enable-active-high;
-+                      gpio = <&pio 7 3 0>;
-+              };
-       };
- };