sunxi: driver refresh for 3.13

[openwrt/svn-archive/archive.git] / target / linux / sunxi / patches-3.13 / 212-dt-sun7i-add-pinmuxing-for-extclocks.patch

diff --git a/target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch b/target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch
new file mode 100644 (file)
index 0000000..3dda294
--- /dev/null
+++ b/target/linux/sunxi/patches-3.13/212-dt-sun7i-add-pinmuxing-for-extclocks.patch
@@ -0,0 +1,38 @@
+From f3a50c26f33a4627e5d3e35f80db3f22a5375237 Mon Sep 17 00:00:00 2001
+From: Chen-Yu Tsai <wens@csie.org>
+Date: Tue, 24 Dec 2013 21:26:20 +0800
+Subject: [PATCH] ARM: dts: sun7i: Add pin muxing options for clock outputs
+
+This patch adds the clock output pin options on the A20.
+The 2 pins can output a configurable clock to be used by
+external modules. This is used on the CubieTruck, to supply
+a 32768 Hz low power clock to the onboard Wifi+BT module.
+
+Signed-off-by: Chen-Yu Tsai <wens@csie.org>
+---
+ arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+--- a/arch/arm/boot/dts/sun7i-a20.dtsi
++++ b/arch/arm/boot/dts/sun7i-a20.dtsi
+@@ -490,6 +490,20 @@
+                               allwinner,drive = <3>;
+                               allwinner,pull = <0>;
+                       };
++
++                      clk_out_a_pins: clk_out_a@0 {
++                              allwinner,pins = "PI12";
++                              allwinner,function = "clk_out_a";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      clk_out_b_pins: clk_out_b@0 {
++                              allwinner,pins = "PI13";
++                              allwinner,function = "clk_out_b";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
+               };
+ 
+               sata: ahci@01c18000 {