--- /dev/null
+From 29b4146ec174f0f598d6b454caa335e8f57e392b Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Mon, 28 Jul 2014 23:05:14 +0200
+Subject: [PATCH] ARM: dts: sun7i: Add Banana Pi board
+
+The Banana Pi is an A20 based development board using Raspberry Pi compatible
+IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
+and stereo audio out + various expenansion headers:
+
+http://www.lemaker.org/
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++
+ 2 files changed, 215 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 38c89ca..63422bd 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+ sun6i-a31-hummingbird.dtb \
+ sun6i-a31-m9.dtb
+ dtb-$(CONFIG_MACH_SUN7I) += \
++ sun7i-a20-bananapi.dtb \
+ sun7i-a20-cubieboard2.dtb \
+ sun7i-a20-cubietruck.dtb \
+ sun7i-a20-hummingbird.dtb \
+diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+new file mode 100644
+index 0000000..0e7c9f5
+--- /dev/null
++++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+@@ -0,0 +1,214 @@
++/*
++ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
++ *
++ * Hans de Goede <hdegoede@redhat.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public
++ * License along with this library; if not, write to the Free
++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
++ * MA 02110-1301 USA
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++
++/ {
++ model = "LeMaker Banana Pi";
++ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
++
++ soc@01c00000 {
++ spi0: spi@01c05000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&spi0_pins_a>;
++ status = "okay";
++ };
++
++ mmc0: mmc@01c0f000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
++ vmmc-supply = <®_vcc3v3>;
++ bus-width = <4>;
++ cd-gpios = <&pio 7 10 0>; /* PH10 */
++ cd-inverted;
++ status = "okay";
++ };
++
++ usbphy: phy@01c13400 {
++ usb1_vbus-supply = <®_usb1_vbus>;
++ usb2_vbus-supply = <®_usb2_vbus>;
++ status = "okay";
++ };
++
++ ehci0: usb@01c14000 {
++ status = "okay";
++ };
++
++ ohci0: usb@01c14400 {
++ status = "okay";
++ };
++
++ ahci: sata@01c18000 {
++ status = "okay";
++ };
++
++ ehci1: usb@01c1c000 {
++ status = "okay";
++ };
++
++ ohci1: usb@01c1c400 {
++ status = "okay";
++ };
++
++ pinctrl@01c20800 {
++ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
++ allwinner,pins = "PH10";
++ allwinner,function = "gpio_in";
++ allwinner,drive = <0>;
++ allwinner,pull = <1>;
++ };
++
++ gmac_power_pin_bananapi: gmac_power_pin@0 {
++ allwinner,pins = "PH23";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++
++ led_pins_bananapi: led_pins@0 {
++ allwinner,pins = "PH24";
++ allwinner,function = "gpio_out";
++ allwinner,drive = <0>;
++ allwinner,pull = <0>;
++ };
++ };
++
++ ir0: ir@01c21800 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&ir0_pins_a>;
++ status = "okay";
++ };
++
++ uart0: serial@01c28000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart0_pins_a>;
++ status = "okay";
++ };
++
++ uart3: serial@01c28c00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart3_pins_b>;
++ status = "okay";
++ };
++
++ uart7: serial@01c29c00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart7_pins_a>;
++ status = "okay";
++ };
++
++ i2c0: i2c@01c2ac00 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c0_pins_a>;
++ status = "okay";
++
++ axp209: pmic@34 {
++ compatible = "x-powers,axp209";
++ reg = <0x34>;
++ interrupt-parent = <&nmi_intc>;
++ interrupts = <0 8>;
++
++ interrupt-controller;
++ #interrupt-cells = <1>;
++ };
++ };
++
++ i2c2: i2c@01c2b400 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&i2c2_pins_a>;
++ status = "okay";
++ };
++
++ gmac: ethernet@01c50000 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_pins_rgmii_a>;
++ phy = <&phy1>;
++ phy-mode = "rgmii";
++ phy-supply = <®_gmac_3v3>;
++ status = "okay";
++
++ phy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_pins_bananapi>;
++
++ green {
++ label = "bananapi:green:usr";
++ gpios = <&pio 7 24 0>;
++ };
++ };
++
++ reg_usb1_vbus: usb1-vbus {
++ status = "okay";
++ };
++
++ reg_usb2_vbus: usb2-vbus {
++ status = "okay";
++ };
++
++ reg_gmac_3v3: gmac-3v3 {
++ compatible = "regulator-fixed";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac_power_pin_bananapi>;
++ regulator-name = "gmac-3v3";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ startup-delay-us = <50000>;
++ enable-active-high;
++ gpio = <&pio 7 23 0>;
++ };
++};
projects / openwrt / svn-archive / archive.git / blobdiff