kernel/sunxi: Create kernel files for v6.6 (from v6.1)

[openwrt/openwrt.git] / target / linux / sunxi / patches-6.1 / 450-arm64-dts-enable-wifi-on-pine64-boards.patch

diff --git a/target/linux/sunxi/patches-6.1/450-arm64-dts-enable-wifi-on-pine64-boards.patch b/target/linux/sunxi/patches-6.1/450-arm64-dts-enable-wifi-on-pine64-boards.patch
deleted file mode 100644 (file)
index 3876852..0000000
--- a/target/linux/sunxi/patches-6.1/450-arm64-dts-enable-wifi-on-pine64-boards.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-@@ -42,6 +42,11 @@
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <1800000>;
-       };
-+
-+      wifi_pwrseq: wifi_pwrseq {
-+              compatible = "mmc-pwrseq-simple";
-+              reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+      };
- };
- 
- &ac_power_supply {
-@@ -102,6 +107,21 @@
-               reg = <1>;
-       };
- };
-+
-+&mmc1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&mmc1_pins>;
-+      vmmc-supply = <&reg_dldo4>;
-+      vqmmc-supply = <&reg_eldo1>;
-+      mmc-pwrseq = <&wifi_pwrseq>;
-+      bus-width = <4>;
-+      non-removable;
-+      status = "okay";
-+
-+      rtl8723cs: wifi@1 {
-+              reg = <1>;
-+      };
-+};
- 
- &mmc2 {
-       pinctrl-names = "default";
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -35,6 +35,11 @@
-                       };
-               };
-       };
-+
-+      wifi_pwrseq: wifi_pwrseq {
-+              compatible = "mmc-pwrseq-simple";
-+              reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+      };
- };
- 
- &codec {
-@@ -124,6 +129,21 @@
-       status = "okay";
- };
- 
-+&mmc1 {
-+      pinctrl-names = "default";
-+      pinctrl-0 = <&mmc1_pins>;
-+      vmmc-supply = <&reg_dldo4>;
-+      vqmmc-supply = <&reg_eldo1>;
-+      mmc-pwrseq = <&wifi_pwrseq>;
-+      bus-width = <4>;
-+      non-removable;
-+      status = "okay";
-+
-+      rtl8723cs: wifi@1 {
-+              reg = <1>;
-+      };
-+};
-+
- &ohci0 {
-       status = "okay";
- };