[ubicom32]: move new files out from platform support patch

[openwrt/svn-archive/archive.git] / target / linux / ubicom32 / files / arch / ubicom32 / Kconfig.debug

diff --git a/target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug b/target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug
new file mode 100644 (file)
index 0000000..330c758
--- /dev/null
+++ b/target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug
@@ -0,0 +1,129 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+       def_bool y
+
+config DEBUG_VERBOSE
+        bool "Verbose fault messages"
+        default y
+        select PRINTK
+        help
+          When a program crashes due to an exception, or the kernel detects
+          an internal error, the kernel can print a not so brief message
+          explaining what the problem was. This debugging information is
+          useful to developers and kernel hackers when tracking down problems,
+          but mostly meaningless to other people. This is always helpful for
+          debugging but serves no purpose on a production system.
+          Most people should say N here.
+
+config PROTECT_KERNEL
+       default y
+       bool 'Enable Kernel range register Protection'
+       help
+         Adds code to enable/disable range registers to protect static
+         kernel code/data from userspace.  Currently the ranges covered
+         do no protect kernel loadable modules or dynamically allocated
+         kernel data.
+
+config NO_KERNEL_MSG
+       bool "Suppress Kernel BUG Messages"
+       help
+         Do not output any debug BUG messages within the kernel.
+
+config EARLY_PRINTK
+       bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)."
+       default n
+       help
+         If you want to use the serdes driver (console=ttyUS0) for
+         early printk, you must also supply an additional kernel boot
+         parameter like this:
+
+               serdes=ioportaddr,irq,clockrate,baud
+
+         For an IP7160RGW eval board, you could use this:
+
+               serdes=0x2004000,61,250000000,57600
+
+         which will let you see early printk output at 57600 baud.
+
+config STOP_ON_TRAP
+       bool "Enable stopping at the LDSR for all traps"
+       default n
+       help
+       Cause the LDSR to stop all threads whenever a trap is about to be serviced
+
+config STOP_ON_BUG
+       bool "Enable stopping on failed BUG_ON()"
+       default n
+       help
+       Cause all BUG_ON failures to stop all threads
+
+config DEBUG_IRQMEASURE
+       bool "Enable IRQ handler measurements"
+       default n
+       help
+       When enabled each IRQ's min/avg/max times will be printed.  If the handler
+       re-enables interrupt, the times will show the full time including to service
+       nested interrupts.  See /proc/irq_measurements.
+
+config DEBUG_PCIMEASURE
+       bool "Enable PCI transaction measurements"
+       default n
+       help
+       When enabled the system will measure the min/avg/max timer for each PCI transactions.
+       See /proc/pci_measurements.
+
+config ACCESS_OK_CHECKS_ENABLED
+       bool "Enable user space access checks"
+       default n
+       help
+       Enabling this check causes the kernel to verify that addresses passed
+       to the kernel by the user space code are within the processes
+       address space.  On a no-mmu system, this is done by examining the
+       processes memory data structures (adversly affecting performance) but
+       ensuring that a process does not ask the kernel to violate another
+       processes address space.  Sadly, the kernel uses access_ok() for
+       address that are in the kernel which results in a large volume of
+       false positives.
+
+choice
+       prompt "Unaligned Access Support"
+       default UNALIGNED_ACCESS_ENABLED
+       help
+               Kernel / Userspace unaligned access handling.
+
+config  UNALIGNED_ACCESS_ENABLED
+       bool "Kernel and Userspace"
+       help
+
+config  UNALIGNED_ACCESS_USERSPACE_ONLY
+       bool "Userspace Only"
+       help
+
+config  UNALIGNED_ACCESS_DISABLED
+       bool "Disabled"
+       help
+
+endchoice
+
+config DEBUG_STACKOVERFLOW
+       bool "Check for stack overflows"
+       default n
+       depends on DEBUG_KERNEL
+       help
+         This option will cause messages to be printed if free kernel stack space
+         drops below a certain limit (THREAD_SIZE /8).
+
+config DEBUG_STACK_USAGE
+       bool "Stack utilization instrumentation"
+       default n
+       depends on DEBUG_KERNEL
+       help
+         Enables the display of the minimum amount of free kernel stack which each
+         task has ever had available in the sysrq-T and sysrq-P debug output.
+
+         This option will slow down process creation somewhat.
+
+source "lib/Kconfig.debug"
+
+endmenu