+++ /dev/null
-# esd.m4 serial 1 (libmikmod-3.1.12)
-# Configure paths for ESD
-# Manish Singh 98-9-30
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS
-dnl
-AC_DEFUN([AM_PATH_ESD],
-[dnl
-dnl Get the cflags and libraries from the esd-config script
-dnl
-AC_ARG_WITH(esd-prefix,[ --with-esd-prefix=PFX Prefix where ESD is installed (optional)],
- esd_prefix="$withval", esd_prefix="")
-AC_ARG_WITH(esd-exec-prefix,[ --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],
- esd_exec_prefix="$withval", esd_exec_prefix="")
-AC_ARG_ENABLE(esdtest, [ --disable-esdtest Do not try to compile and run a test ESD program],
- , enable_esdtest=yes)
-
- if test x$esd_exec_prefix != x ; then
- esd_args="$esd_args --exec-prefix=$esd_exec_prefix"
- if test x${ESD_CONFIG+set} != xset ; then
- ESD_CONFIG=$esd_exec_prefix/bin/esd-config
- fi
- fi
- if test x$esd_prefix != x ; then
- esd_args="$esd_args --prefix=$esd_prefix"
- if test x${ESD_CONFIG+set} != xset ; then
- ESD_CONFIG=$esd_prefix/bin/esd-config
- fi
- fi
-
- AC_PATH_PROG(ESD_CONFIG, esd-config, no)
- min_esd_version=ifelse([$1], ,0.2.7,$1)
- AC_MSG_CHECKING(for ESD - version >= $min_esd_version)
- no_esd=""
- if test "$ESD_CONFIG" = "no" ; then
- no_esd=yes
- else
- AC_LANG_SAVE
- AC_LANG_C
- ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`
- ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`
-
- esd_major_version=`$ESD_CONFIG $esd_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- esd_minor_version=`$ESD_CONFIG $esd_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_esdtest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $ESD_CFLAGS"
- LIBS="$LIBS $ESD_LIBS"
-dnl
-dnl Now check if the installed ESD is sufficiently new. (Also sanity
-dnl checks the results of esd-config to some extent
-dnl
- rm -f conf.esdtest
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <esd.h>
-
-char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.esdtest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = my_strdup("$min_esd_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_esd_version");
- exit(1);
- }
-
- if (($esd_major_version > major) ||
- (($esd_major_version == major) && ($esd_minor_version > minor)) ||
- (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);
- printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);
- printf("*** best to upgrade to the required version.\n");
- printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");
- printf("*** to point to the correct copy of esd-config, and remove the file\n");
- printf("*** config.cache before re-running configure\n");
- return 1;
- }
-}
-
-],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- AC_LANG_RESTORE
- fi
- fi
- if test "x$no_esd" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$ESD_CONFIG" = "no" ; then
- echo "*** The esd-config script installed by ESD could not be found"
- echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the ESD_CONFIG environment variable to the"
- echo "*** full path to esd-config."
- else
- if test -f conf.esdtest ; then
- :
- else
- echo "*** Could not run ESD test program, checking why..."
- CFLAGS="$CFLAGS $ESD_CFLAGS"
- LIBS="$LIBS $ESD_LIBS"
- AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([
-#include <stdio.h>
-#include <esd.h>
-], [ return 0; ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding ESD or finding the wrong"
- echo "*** version of ESD. If it is not finding ESD, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means ESD was incorrectly installed"
- echo "*** or that you have moved ESD since it was installed. In the latter case, you"
- echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- AC_LANG_RESTORE
- fi
- fi
- ESD_CFLAGS=""
- ESD_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(ESD_CFLAGS)
- AC_SUBST(ESD_LIBS)
- rm -f conf.esdtest
-])
-
-dnl AM_ESD_SUPPORTS_MULTIPLE_RECORD([ACTION-IF-SUPPORTS [, ACTION-IF-NOT-SUPPORTS]])
-dnl Test, whether esd supports multiple recording clients (version >=0.2.21)
-dnl
-AC_DEFUN([AM_ESD_SUPPORTS_MULTIPLE_RECORD],
-[dnl
- AC_MSG_NOTICE([whether installed esd version supports multiple recording clients])
- ac_save_ESD_CFLAGS="$ESD_CFLAGS"
- ac_save_ESD_LIBS="$ESD_LIBS"
- AM_PATH_ESD(0.2.21,
- ifelse([$1], , [
- AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, true)
- AC_DEFINE(ESD_SUPPORTS_MULTIPLE_RECORD, 1,
- [Define if you have esound with support of multiple recording clients.])],
- [$1]),
- ifelse([$2], , [AM_CONDITIONAL(ESD_SUPPORTS_MULTIPLE_RECORD, false)], [$2])
- if test "x$ac_save_ESD_CFLAGS" != x ; then
- ESD_CFLAGS="$ac_save_ESD_CFLAGS"
- fi
- if test "x$ac_save_ESD_LIBS" != x ; then
- ESD_LIBS="$ac_save_ESD_LIBS"
- fi
- )
-])
-
projects / openwrt / staging / wigyori.git / blobdiff