X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fadm5120%2Ffiles-3.18%2Farch%2Fmips%2Fadm5120%2Fcommon%2Fsetup.c;fp=target%2Flinux%2Fadm5120%2Ffiles-3.18%2Farch%2Fmips%2Fadm5120%2Fcommon%2Fsetup.c;h=0000000000000000000000000000000000000000;hb=2d0a2ff1e0c386bcb3b1ae0a0924624e8cb20b37;hp=c0410afdf2fec1e5406c5ce99be95f820683b312;hpb=49dca520fb900410a436baa58404539aa1e10381;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c
deleted file mode 100644
index c0410afdf2..0000000000
--- a/target/linux/adm5120/files-3.18/arch/mips/adm5120/common/setup.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  ADM5120 specific setup
- *
- *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *	Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *	Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/bootinfo.h>
-#include <asm/mips_machine.h>
-#include <asm/idle.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-#define ADM5120_SYS_TYPE_LEN	64
-
-unsigned char adm5120_sys_type[ADM5120_SYS_TYPE_LEN];
-void (*adm5120_board_reset)(void);
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
-	[ADM5120_PROM_GENERIC]		= "Generic",
-	[ADM5120_PROM_CFE]		= "CFE",
-	[ADM5120_PROM_UBOOT]		= "U-Boot",
-	[ADM5120_PROM_MYLOADER]		= "MyLoader",
-	[ADM5120_PROM_ROUTERBOOT]	= "RouterBOOT",
-	[ADM5120_PROM_BOOTBASE]		= "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
-	printk(KERN_INFO "SoC      : %s\n", adm5120_sys_type);
-	printk(KERN_INFO "Bootdev  : %s flash\n",
-		adm5120_nand_boot ? "NAND" : "NOR");
-	printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
-}
-
-const char *get_system_type(void)
-{
-	return adm5120_sys_type;
-}
-
-static void adm5120_restart(char *command)
-{
-	/* TODO: stop switch before reset */
-
-	if (adm5120_board_reset)
-		adm5120_board_reset();
-
-	SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-static void adm5120_halt(void)
-{
-	local_irq_disable();
-
-	while (1) {
-		if (cpu_wait)
-			cpu_wait();
-	}
-}
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = adm5120_speed / 2;
-}
-
-void __init plat_mem_setup(void)
-{
-	adm5120_soc_init();
-	adm5120_mem_init();
-
-	sprintf(adm5120_sys_type, "ADM%04X%s rev %u, running at %lu.%03lu MHz",
-		adm5120_product_code,
-		adm5120_package_bga() ? "" : "P",
-		adm5120_revision,
-		(adm5120_speed / 1000000), (adm5120_speed / 1000) % 1000);
-
-	adm5120_report();
-
-	_machine_restart = adm5120_restart;
-	_machine_halt = adm5120_halt;
-	pm_power_off = adm5120_halt;
-
-	set_io_port_base(KSEG1);
-}
-
-static int __init adm5120_board_setup(void)
-{
-	adm5120_gpio_init();
-
-	mips_machine_setup();
-
-	return 0;
-}
-arch_initcall(adm5120_board_setup);
-
-static void __init adm5120_generic_board_setup(void)
-{
-	adm5120_add_device_uart(0);
-	adm5120_add_device_uart(1);
-
-	adm5120_add_device_flash(0);
-	adm5120_add_device_switch(6, NULL);
-}
-
-MIPS_MACHINE(MACH_ADM5120_GENERIC, "Generic", "Generic ADM5120 board",
-	     adm5120_generic_board_setup);