X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Far7242_ubnt_sw.dtsi;fp=target%2Flinux%2Fath79%2Fdts%2Far7242_ubnt_sw.dtsi;h=15f204729d51cb10c4a7cc7d52c50c82fc6dd3c0;hb=2e05d6185aca35e75f64ab63ddd822166712f6aa;hp=0000000000000000000000000000000000000000;hpb=28080d54d217fb4ab112e079f69462fee695dbf8;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi b/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi
new file mode 100644
index 0000000000..15f204729d
--- /dev/null
+++ b/target/linux/ath79/dts/ar7242_ubnt_sw.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7242.dtsi"
+
+/ {
+	compatible = "qca,ar7242";
+	model = "Ubiquiti Networks SW board";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	aliases {
+		led-boot = &led_usr;
+		led-failsafe = &led_usr;
+		led-running = &led_usr;
+		led-upgrade = &led_usr;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_usr: usr {
+			label = "ubnt:yellow:usr";
+			gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	gpio_spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		ranges;
+
+		sck-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		gpio_hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+			enable-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+};
+
+&spi {
+	status = "okay";
+
+	num-cs = <1>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x000000 0x040000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@40000 {
+				reg = <0x040000 0x010000>;
+				label = "u-boot-env";
+				read-only;
+			};
+
+			partition@50000 {
+				compatible = "denx,uimage";
+				reg = <0x050000 0x760000>;
+				label = "firmware";
+			};
+
+			partition@7b0000 {
+				reg = <0x7b0000 0x040000>;
+				label = "cfg";
+				read-only;
+			};
+
+			art: partition@7f0000 {
+				reg = <0x7f0000 0x010000>;
+				label = "art";
+				read-only;
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_port: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+
+	mtd-mac-address = <&art 0x6>;
+};