X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Fqca9557_8dev_rambutan.dts;fp=target%2Flinux%2Fath79%2Fdts%2Fqca9557_8dev_rambutan.dts;h=cf1c00c642ecffac7c4dcebea7ad3c0b68270f8a;hb=326e488c7b02fb291e0b01970db3482284307c8d;hp=0000000000000000000000000000000000000000;hpb=4e57fd5adaf0c937da1e947f32dfa9ae513637a5;p=openwrt%2Fopenwrt.git diff --git a/target/linux/ath79/dts/qca9557_8dev_rambutan.dts b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts new file mode 100644 index 0000000000..cf1c00c642 --- /dev/null +++ b/target/linux/ath79/dts/qca9557_8dev_rambutan.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca955x.dtsi" + +/ { + compatible = "8dev,rambutan", "qca,qca9557"; + model = "8devices Rambutan"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + read-only; + }; + + partition@300000 { + label = "u-boot-env"; + reg = <0x300000 0x200000>; + }; + + art: partition@500000 { + label = "art"; + reg = <0x500000 0x100000>; + read-only; + }; + + partition@600000 { + label = "ubi"; + reg = <0x600000 0x7a00000>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; +}; + +&mdio1 { + status = "okay"; + + phy1: ethernet-phy@0 { + reg = <0>; + reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + phy-mode = "sgmii"; + at803x-override-sgmii-link-check; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + phy-mode = "mii"; + phy-handle = <&phy0>; +}; + +ð1 { + status = "okay"; + + pll-data = <0x17000000 0x101 0x1313>; + phy-handle = <&phy1>; + phy-mode = "sgmii"; + qca955x-sgmii-fixup; + mtd-mac-address = <&art 0x6>; +}; + +&wmac { + status = "okay"; + + gpio-controller; + mtd-cal-data = <&art 0x1000>; +}; + +&pcie0 { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; +}; + +&uart { + status = "okay"; +};