X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fgeneric%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F11-ath10k-caldata;h=5ba1a7a8ffade8a9e4c9625e21023e4aafab4872;hb=baacdd53dfd1daf3d4fada8921a46a562e4520e2;hp=3ce95905b88c9309b223b44573f8299e096dec47;hpb=a0ef42e77c367312df7edc78dbd0d18a3faf9808;p=openwrt%2Fstaging%2Fdedeckeh.git

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3ce95905b8..5ba1a7a8ff 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -10,12 +10,28 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
 	case $board in
-	avm,fritz1750e)
+	allnet,all-wap02860ac|\
+	engenius,eap1200h|\
+	engenius,enstationac-v1|\
+	glinet,gl-x750)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
+		;;
+	avm,fritz1750e|\
+	avm,fritzdvbc)
 		caldata_extract "urlader" 0x198a 0x844
 		;;
 	comfast,cf-wr650ac-v1|\
 	comfast,cf-wr650ac-v2|\
+	devolo,dlan-pro-1200plus-ac|\
 	devolo,magic-2-wifi|\
+	joyit,jt-or750i|\
+	qxwlan,e1700ac-v2-8m|\
+	qxwlan,e1700ac-v2-16m|\
+	qxwlan,e600gac-v2-8m|\
+	qxwlan,e600gac-v2-16m|\
+	ubnt,aircube-ac|\
+	ubnt,bullet-ac|\
 	ubnt,unifiac-lite|\
 	ubnt,unifiac-lr|\
 	ubnt,unifiac-mesh|\
@@ -23,10 +39,12 @@ case "$FIRMWARE" in
 	ubnt,lap-120|\
 	ubnt,litebeam-ac-gen2|\
 	ubnt,nanobeam-ac|\
+	ubnt,nanobeam-ac-gen2|\
 	ubnt,nanostation-ac|\
 	ubnt,nanostation-ac-loco|\
 	ubnt,powerbeam-5ac-500|\
 	ubnt,powerbeam-5ac-gen2|\
+	ubnt,rocket-5ac-lite|\
 	ubnt,unifiac-pro|\
 	yuncore,a770)
 		caldata_extract "art" 0x5000 0x844
@@ -40,6 +58,12 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
 		;;
+	dlink,dap-2660-a1|\
+	dlink,dap-2695-a1|\
+	dlink,dap-3662-a1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+		;;
 	dlink,dir-859-a1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
@@ -47,6 +71,7 @@ case "$FIRMWARE" in
 	elecom,wrc-1750ghbk2-i)
 		caldata_extract "art" 0x5000 0x844
 		;;
+	engenius,ecb1200|\
 	engenius,ecb1750)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
@@ -54,21 +79,18 @@ case "$FIRMWARE" in
 	engenius,epg5000|\
 	iodata,wn-ac1167dgr|\
 	iodata,wn-ac1600dgr2|\
-	sitecom,wlr-7100)
+	sitecom,wlr-7100|\
+	zyxel,nbg6616)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
 		;;
 	engenius,ews511ap)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 1)
 		;;
 	glinet,gl-ar750)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
-		;;
-	glinet,gl-x750)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
 		;;
 	nec,wg800hp)
 		caldata_extract "art" 0x5000 0x844
@@ -79,9 +101,16 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
 		;;
+	openmesh,a40|\
+	openmesh,a60|\
+	openmesh,mr1750-v1|\
+	openmesh,mr1750-v2)
+		caldata_extract "ART" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
+		;;
 	openmesh,om5p-ac-v2)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) 16)
 		;;
 	qihoo,c301)
 		caldata_extract "radiocfg" 0x5000 0x844
@@ -91,40 +120,45 @@ case "$FIRMWARE" in
 	tplink,archer-c2-v3|\
 	tplink,archer-c7-v4|\
 	tplink,archer-c7-v5|\
-	tplink,archer-c25-v1)
+	tplink,archer-c25-v1|\
+	tplink,tl-wr902ac-v1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
 		;;
 	tplink,archer-c5-v1|\
-	tplink,archer-c7-v2)
+	tplink,archer-c7-v2|\
+	tplink,tl-wdr7500-v3)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
 		;;
 	tplink,archer-d50-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) 2)
 		;;
 	tplink,archer-d7-v1|\
 	tplink,archer-d7b-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfs 0xf100) 2)
+		;;
+	tplink,eap245-v1|\
+	tplink,re450-v2|\
+	tplink,re450-v3|\
+	tplink,re455-v1)
+		caldata_extract "art" 0x5000 0x844
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
 		;;
 	tplink,re350k-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 2)
 		;;
 	tplink,re355-v1|\
 	tplink,re450-v1)
 		caldata_extract "art" 0x5000 0x844
 		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
-	tplink,re450-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
-		;;
-	tplink,tl-wr902ac-v1)
+	tplink,tl-wpa8630-v1)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary tplink 0x8) -1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x0fc00) 1)
 		;;
 	esac
 	;;
@@ -132,7 +166,7 @@ case "$FIRMWARE" in
 	case $board in
 	sitecom,wlr-8100)
 		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 1)
 		;;
 	esac
 	;;
@@ -145,18 +179,32 @@ case "$FIRMWARE" in
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 		;;
+	comfast,cf-e375ac|\
 	comfast,cf-e560ac|\
 	comfast,cf-ew72|\
 	comfast,cf-wr752ac-v1)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 2)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
 		;;
+	dlink,dap-2680-a1)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
+	dlink,dir-842-c3)
+		caldata_extract "art" 0x5000 0x2f20
+		caldata_valid "202f" || caldata_extract "reserved" 0x15000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	nec,wf1200cr|\
 	nec,wg1200cr)
 		caldata_extract "art" 0x5000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
@@ -181,12 +229,33 @@ case "$FIRMWARE" in
 	tplink,archer-c60-v2|\
 	tplink,archer-c60-v3|\
 	tplink,archer-c6-v2|\
-	tplink,archer-c6-v2-us)
+	tplink,archer-c6-v2-us|\
+	tplink,tl-wa1201-v2)
 		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
+	tplink,eap225-outdoor-v1|\
+	tplink,eap225-v3|\
+	tplink,eap225-wall-v2|\
+	tplink,tl-wpa8630p-v2-int|\
+	tplink,tl-wpa8630p-v2.0-eu|\
+	tplink,tl-wpa8630p-v2.1-eu)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	tplink,eap245-v3)
+		caldata_extract "art" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+		;;
+	xiaomi,aiot-ac2350)
+		caldata_extract "art" 0x5000 0x2f20
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9984/hw1.0/board.bin
+		;;
 	yuncore,a782|\
 	yuncore,xd4200)
 		caldata_extract "art" 0x5000 0x2f20