X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0438-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0438-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch;h=fa6092643973c0d048124135ecb6dec8a41897e2;hb=84d555aa74434392b682fd9eb0fa701c89a046d6;hp=0000000000000000000000000000000000000000;hpb=953973c2991e8640549a55df7a0574a1abac8644;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/brcm2708/patches-4.19/950-0438-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch b/target/linux/brcm2708/patches-4.19/950-0438-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch
new file mode 100644
index 0000000000..fa60926439
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.19/950-0438-BCM270X_DT-Create-bcm2708-rpi-zero.dts.patch
@@ -0,0 +1,148 @@
+From e819b50b0c384f11f4eaf6e1ea76030c320f4511 Mon Sep 17 00:00:00 2001
+From: Phil Elwell <phil@raspberrypi.org>
+Date: Tue, 28 May 2019 16:23:51 +0100
+Subject: [PATCH] BCM270X_DT: Create bcm2708-rpi-zero.dts
+
+The Pi Zero deserves a dedicated .dtb file - sharing the b-plus .dtb
+has been observed to cause an issue with the MAC address of some
+Ethernet dongles.
+
+See: https://github.com/raspberrypi/linux/issues/2990
+
+Signed-off-by: Phil Elwell <phil@raspberrypi.org>
+---
+ arch/arm/boot/dts/Makefile             |   1 +
+ arch/arm/boot/dts/bcm2708-rpi-zero.dts | 117 +++++++++++++++++++++++++
+ 2 files changed, 118 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
+ 	bcm2708-rpi-b.dtb \
+ 	bcm2708-rpi-b-plus.dtb \
+ 	bcm2708-rpi-cm.dtb \
++	bcm2708-rpi-zero.dtb \
+ 	bcm2708-rpi-zero-w.dtb \
+ 	bcm2709-rpi-2-b.dtb \
+ 	bcm2710-rpi-3-b.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts
+@@ -0,0 +1,117 @@
++/dts-v1/;
++
++#include "bcm2708.dtsi"
++#include "bcm283x-rpi-csi1-2lane.dtsi"
++
++/ {
++	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
++	model = "Raspberry Pi Zero";
++
++	chosen {
++		bootargs = "coherent_pool=1M";
++	};
++};
++
++&gpio {
++	spi0_pins: spi0_pins {
++		brcm,pins = <9 10 11>;
++		brcm,function = <4>; /* alt0 */
++	};
++
++	spi0_cs_pins: spi0_cs_pins {
++		brcm,pins = <8 7>;
++		brcm,function = <1>; /* output */
++	};
++
++	i2c0_pins: i2c0 {
++		brcm,pins = <0 1>;
++		brcm,function = <4>;
++	};
++
++	i2c1_pins: i2c1 {
++		brcm,pins = <2 3>;
++		brcm,function = <4>;
++	};
++
++	i2s_pins: i2s {
++		brcm,pins = <18 19 20 21>;
++		brcm,function = <4>; /* alt0 */
++	};
++
++	audio_pins: audio_pins {
++		brcm,pins = <>;
++		brcm,function = <>;
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&spi0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
++	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
++
++	spidev0: spidev@0{
++		compatible = "spidev";
++		reg = <0>;	/* CE0 */
++		#address-cells = <1>;
++		#size-cells = <0>;
++		spi-max-frequency = <125000000>;
++	};
++
++	spidev1: spidev@1{
++		compatible = "spidev";
++		reg = <1>;	/* CE1 */
++		#address-cells = <1>;
++		#size-cells = <0>;
++		spi-max-frequency = <125000000>;
++	};
++};
++
++&i2c0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c0_pins>;
++	clock-frequency = <100000>;
++};
++
++&i2c1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c1_pins>;
++	clock-frequency = <100000>;
++};
++
++&i2c2 {
++	clock-frequency = <100000>;
++};
++
++&i2s {
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2s_pins>;
++};
++
++&leds {
++	act_led: act {
++		label = "led0";
++		linux,default-trigger = "mmc0";
++		gpios = <&gpio 47 0>;
++	};
++};
++
++&hdmi {
++	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
++};
++
++&audio {
++	pinctrl-names = "default";
++	pinctrl-0 = <&audio_pins>;
++};
++
++/ {
++	__overrides__ {
++		act_led_gpio = <&act_led>,"gpios:4";
++		act_led_activelow = <&act_led>,"gpios:8";
++		act_led_trigger = <&act_led>,"linux,default-trigger";
++	};
++};