X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm47xx-2.6%2Ffiles%2Fdrivers%2Fssb%2Fdriver_chipcommon.c;fp=target%2Flinux%2Fbrcm47xx-2.6%2Ffiles%2Fdrivers%2Fssb%2Fdriver_chipcommon.c;h=a283de9e3a061c2dbc03acd0514b62ce26cfd8df;hb=eed7b91c68806d8e6c72aabfadf2322b76997e3a;hp=8e511c77b52f248047a54d05fb365b54eea31ced;hpb=7e4f2dbf6674f1691acbeceacabd54ae4e09b5d4;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c
index 8e511c77b5..a283de9e3a 100644
--- a/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c
+++ b/target/linux/brcm47xx-2.6/files/drivers/ssb/driver_chipcommon.c
@@ -293,15 +293,15 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 
 	/* set register for external IO to control LED. */
 	chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11);
-	tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;		/* Waitcount-3 = 10ns */
-	tmp |= ceildiv(40, ns) << SSB_PROG_WCNT_1_SHIFT;	/* Waitcount-1 = 40ns */
-	tmp |= ceildiv(240, ns);				/* Waitcount-0 = 240ns */
+	tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;		/* Waitcount-3 = 10ns */
+	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;	/* Waitcount-1 = 40ns */
+	tmp |= DIV_ROUND_UP(240, ns);				/* Waitcount-0 = 240ns */
 	chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp);	/* 0x01020a0c for a 100Mhz clock */
 
 	/* Set timing for the flash */
-	tmp = ceildiv(10, ns) << SSB_FLASH_WCNT_3_SHIFT;	/* Waitcount-3 = 10nS */
-	tmp |= ceildiv(10, ns) << SSB_FLASH_WCNT_1_SHIFT;	/* Waitcount-1 = 10nS */
-	tmp |= ceildiv(120, ns);				/* Waitcount-0 = 120nS */
+	tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT;	/* Waitcount-3 = 10nS */
+	tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT;	/* Waitcount-1 = 10nS */
+	tmp |= DIV_ROUND_UP(120, ns);				/* Waitcount-0 = 120nS */
 	if ((bus->chip_id == 0x5365) ||
 	    (dev->id.revision < 9))
 		chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp);
@@ -312,10 +312,10 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 
 	if (bus->chip_id == 0x5350) {
 		/* Enable EXTIF */
-		tmp = ceildiv(10, ns) << SSB_PROG_WCNT_3_SHIFT;	  /* Waitcount-3 = 10ns */
-		tmp |= ceildiv(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
-		tmp |= ceildiv(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
-		tmp |= ceildiv(120, ns);			  /* Waitcount-0 = 120ns */
+		tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;	  /* Waitcount-3 = 10ns */
+		tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;  /* Waitcount-2 = 20ns */
+		tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */
+		tmp |= DIV_ROUND_UP(120, ns);			  /* Waitcount-0 = 120ns */
 		chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */
 	}
 }