X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fbrcm63xx%2Fpatches-3.14%2F526-board_CT6373-1.patch;fp=target%2Flinux%2Fbrcm63xx%2Fpatches-3.14%2F526-board_CT6373-1.patch;h=ac24ebd047eb942f05e74ebce01bc8cf01db800b;hb=8e04efe3e59dcf31a7ab62ef613b77d8d00af122;hp=d08822a6c57b98618519db53513ddb9635e8ba69;hpb=ce25f4b294fba8cc550ba00dd3fb619a7e95eb1c;p=openwrt%2Fsvn-archive%2Farchive.git diff --git a/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch index d08822a6c5..ac24ebd047 100644 --- a/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch +++ b/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch @@ -1,61 +1,9 @@ --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -43,6 +43,12 @@ - #define NB4_SPI_GPIO_CLK 6 - #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X)) - -+#define CT6373_PID_OFFSET 0xff80 -+#define CT6373_74X164_GPIO_BASE 64 -+#define CT6373_SPI_GPIO_MOSI 7 -+#define CT6373_SPI_GPIO_CLK 6 -+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X)) -+ - /* - * known 3368 boards - */ -@@ -2035,6 +2041,124 @@ static struct board_info __initdata boar - .num_spis = ARRAY_SIZE(nb4_spi_devices), +@@ -1251,6 +1251,31 @@ static struct board_info __initdata boar + .num_usbh_ports = 2, }; -+ -+struct spi_gpio_platform_data ct6373_spi_gpio_data = { -+ .sck = CT6373_SPI_GPIO_CLK, -+ .mosi = CT6373_SPI_GPIO_MOSI, -+ .miso = SPI_GPIO_NO_MISO, -+ .num_chipselect = 1, -+}; -+ -+static struct platform_device ct6373_spi_gpio = { -+ .name = "spi_gpio", -+ .id = 1, -+ .dev = { -+ .platform_data = &ct6373_spi_gpio_data, -+ }, -+}; -+ -+static struct platform_device * __initdata ct6373_devices[] = { -+ &ct6373_spi_gpio, -+}; -+ -+#if 0 /* FIXME: 3.14 dropped non-DT support */ -+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = { -+ .base = CT6373_74X164_GPIO_BASE -+}; -+#endif -+ -+static struct spi_board_info ct6373_spi_devices[] = { -+#if 0 /* FIXME: 3.14 dropped non-DT support */ -+ { -+ .modalias = "74x164", -+ .max_speed_hz = 781000, -+ .bus_num = 1, -+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT, -+ .mode = SPI_MODE_0, -+ .platform_data = &ct6373_74x164_platform_data -+ } -+#endif -+}; -+ +static struct board_info __initdata board_ct6373_1 = { + .name = "CT6373-1", + .expected_cpu_id = 0x6358, @@ -74,71 +22,17 @@ + .force_duplex_full = 1, + }, + -+ .leds = { -+ { -+ .name = "CT6373-1:green:power", -+ .gpio = 0, -+ .default_trigger = "default-on", -+ }, -+ { -+ .name = "CT6373-1:green:usb", -+ .gpio = 3, -+ .active_low = 1, -+ }, -+ { -+ .name = "CT6373-1:green:wlan", -+ .gpio = 9, -+ .active_low = 1, -+ }, -+ { -+ .name = "CT6373-1:green:adsl", -+ .gpio = CT6373_74HC64_GPIO(0), -+ .active_low = 1, -+ }, -+ { -+ .name = "CT6373-1:green:line", -+ .gpio = CT6373_74HC64_GPIO(1), -+ .active_low = 1, -+ }, -+ { -+ .name = "CT6373-1:green:fxs1", -+ .gpio = CT6373_74HC64_GPIO(2), -+ .active_low = 1, -+ }, -+ { -+ .name = "CT6373-1:green:fxs2", -+ .gpio = CT6373_74HC64_GPIO(3), -+ .active_low = 1, -+ }, -+ }, -+ -+ .buttons = { -+ { -+ .desc = "reset", -+ .gpio = 35, -+ .active_low = 1, -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, -+ }, -+ }, -+ + .fallback_sprom = { + .type = SPROM_BCM4318, + .pci_bus = 0, + .pci_dev = 1, + }, -+ -+ .devs = ct6373_devices, -+ .num_devs = ARRAY_SIZE(ct6373_devices), -+ .spis = ct6373_spi_devices, -+ .num_spis = ARRAY_SIZE(ct6373_spi_devices), +}; + static struct board_info __initdata board_HW553 = { .name = "HW553", .expected_cpu_id = 0x6358, -@@ -2376,6 +2500,7 @@ static const struct board_info __initcon +@@ -1440,6 +1465,7 @@ static const struct board_info __initcon &board_dsl_274xb_rev_c, &board_nb4_ser_r0, &board_nb4_fxc_r1, @@ -146,7 +40,7 @@ &board_HW553, &board_spw303v, #endif -@@ -2429,6 +2554,7 @@ static struct of_device_id const bcm963x +@@ -1493,6 +1519,7 @@ static struct of_device_id const bcm963x { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, },