X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fgeneric%2Fpatches-4.0%2F102-ehci_hcd_ignore_oc.patch;fp=target%2Flinux%2Fgeneric%2Fpatches-4.0%2F102-ehci_hcd_ignore_oc.patch;h=0000000000000000000000000000000000000000;hb=ad133b57a94165e1289ac63b38139047a1450dbb;hp=4da579cedcd352e884ce075937abb27a4df094d0;hpb=86a46a817ba7cfab4963818f9c97508f1f835762;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/generic/patches-4.0/102-ehci_hcd_ignore_oc.patch b/target/linux/generic/patches-4.0/102-ehci_hcd_ignore_oc.patch
deleted file mode 100644
index 4da579cedc..0000000000
--- a/target/linux/generic/patches-4.0/102-ehci_hcd_ignore_oc.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 1e311820ec3055e3f08e687de6564692a7cec675 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:29 +0100
-Subject: [PATCH 11/12] USB: EHCI: add ignore_oc flag to disable overcurrent
- checking
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      |    2 +-
- drivers/usb/host/ehci-hub.c      |    4 ++--
- drivers/usb/host/ehci-platform.c |    1 +
- drivers/usb/host/ehci.h          |    1 +
- include/linux/usb/ehci_pdriver.h |    1 +
- 5 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd
- 		"USB %x.%x started, EHCI %x.%02x%s\n",
- 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- 		temp >> 8, temp & 0xff,
--		ignore_oc ? ", overcurrent ignored" : "");
-+		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
- 
- 	ehci_writel(ehci, INTR_MASK,
- 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -633,7 +633,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- 	 * PORT_POWER; that's surprising, but maybe within-spec.
- 	 */
--	if (!ignore_oc)
-+	if (!ignore_oc && !ehci->ignore_oc)
- 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
- 	else
- 		mask = PORT_CSC | PORT_PEC;
-@@ -995,7 +995,7 @@ int ehci_hub_control(
- 		if (temp & PORT_PEC)
- 			status |= USB_PORT_STAT_C_ENABLE << 16;
- 
--		if ((temp & PORT_OCC) && !ignore_oc){
-+		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
- 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
- 
- 			/*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -264,6 +264,8 @@ static int ehci_platform_probe(struct pl
- 		ehci->big_endian_desc = 1;
- 	if (pdata->big_endian_mmio)
- 		ehci->big_endian_mmio = 1;
-+	if (pdata->ignore_oc)
-+		ehci->ignore_oc = 1;
- 
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- 	if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -226,6 +226,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
- 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
- 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
-+	unsigned		ignore_oc:1;
- 
- 	/* required for usb32 quirk */
- 	#define OHCI_CTRL_HCFS          (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -49,6 +49,7 @@ struct usb_ehci_pdata {
- 	unsigned	no_io_watchdog:1;
- 	unsigned	reset_on_resume:1;
- 	unsigned	dma_mask_64:1;
-+	unsigned	ignore_oc:1;
- 
- 	/* Turn on all power and clocks */
- 	int (*power_on)(struct platform_device *pdev);