X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fgeneric%2Fpending-4.4%2F002-phy_drivers_backport.patch;fp=target%2Flinux%2Fgeneric%2Fpending-4.4%2F002-phy_drivers_backport.patch;h=6c9f30a97d298023651c44a6b74eea6799eefb97;hb=b0d99b77e541412f955c4aa23cc5af10959d92a5;hp=5d83aa3bb1313f83df037bec4f0445db7d42ee82;hpb=94952636e74efcc8ba8d63e69709a1b629aaf8e4;p=openwrt%2Fstaging%2Fchunkeey.git

diff --git a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
index 5d83aa3bb1..6c9f30a97d 100644
--- a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
+++ b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
@@ -464,7 +464,7 @@
  module_init(psb6970_init);
 --- a/drivers/net/phy/rtl8306.c
 +++ b/drivers/net/phy/rtl8306.c
-@@ -876,7 +876,7 @@ rtl8306_config_init(struct phy_device *p
+@@ -877,7 +877,7 @@ rtl8306_config_init(struct phy_device *p
  	int err;
  
  	/* Only init the switch for the primary PHY */
@@ -473,7 +473,7 @@
  		return 0;
  
  	val.value.i = 1;
-@@ -886,7 +886,7 @@ rtl8306_config_init(struct phy_device *p
+@@ -887,7 +887,7 @@ rtl8306_config_init(struct phy_device *p
  	priv->dev.ops = &rtl8306_ops;
  	priv->do_cpu = 0;
  	priv->page = -1;
@@ -482,7 +482,7 @@
  
  	chipid = rtl_get(dev, RTL_REG_CHIPID);
  	chipver = rtl_get(dev, RTL_REG_CHIPVER);
-@@ -932,13 +932,13 @@ rtl8306_fixup(struct phy_device *pdev)
+@@ -933,13 +933,13 @@ rtl8306_fixup(struct phy_device *pdev)
  	u16 chipid;
  
  	/* Attach to primary LAN port and WAN port */
@@ -498,7 +498,7 @@
  	chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
  	if (chipid == 0x5988)
  		pdev->phy_id = RTL8306_MAGIC;
-@@ -956,14 +956,14 @@ rtl8306_probe(struct phy_device *pdev)
+@@ -957,14 +957,14 @@ rtl8306_probe(struct phy_device *pdev)
  		 * share one rtl_priv instance between virtual phy
  		 * devices on the same bus
  		 */
@@ -515,7 +515,7 @@
  
  found:
  	pdev->priv = priv;
-@@ -984,7 +984,7 @@ rtl8306_config_aneg(struct phy_device *p
+@@ -985,7 +985,7 @@ rtl8306_config_aneg(struct phy_device *p
  	struct rtl_priv *priv = pdev->priv;
  
  	/* Only for WAN */
@@ -524,7 +524,7 @@
  		return 0;
  
  	/* Restart autonegotiation */
-@@ -1000,7 +1000,7 @@ rtl8306_read_status(struct phy_device *p
+@@ -1001,7 +1001,7 @@ rtl8306_read_status(struct phy_device *p
  	struct rtl_priv *priv = pdev->priv;
  	struct switch_dev *dev = &priv->dev;
  
@@ -533,7 +533,7 @@
  		/* WAN */
  		pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
  		pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
-@@ -1041,6 +1041,7 @@ static struct phy_driver rtl8306_driver
+@@ -1044,6 +1044,7 @@ static struct phy_driver rtl8306_driver
  	.config_init	= &rtl8306_config_init,
  	.config_aneg	= &rtl8306_config_aneg,
  	.read_status	= &rtl8306_read_status,
@@ -541,7 +541,7 @@
  };
  
  
-@@ -1048,7 +1049,7 @@ static int __init
+@@ -1051,7 +1052,7 @@ static int __init
  rtl_init(void)
  {
  	phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);