X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fipq806x%2Ffiles-4.19%2Farch%2Farm%2Fboot%2Fdts%2Fqcom-ipq8064-r7500v2.dts;h=471e02c5f10ebf2609f2519abcf7691dc6045ff3;hb=9e9fe2392e4ce902745737d4dc379c4fda1f2534;hp=faec8b35aec7149f91641e7294798af58164e308;hpb=63066d3006958ca52df71f53c6f413ad4fb74974;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index faec8b35ae..471e02c5f1 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -136,9 +136,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -149,52 +149,52 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb0_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb1_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 			pinctrl-0 = <&pcie0_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 			pinctrl-0 = <&pcie1_pins>;
 			pinctrl-names = "default";
@@ -202,7 +202,7 @@
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -296,7 +296,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 
@@ -312,7 +312,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -403,5 +403,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };