X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fdts%2FEASY80920.dtsi;fp=target%2Flinux%2Flantiq%2Fdts%2FEASY80920.dtsi;h=bce8d5e2657b917cbe975de39b15b761cade3cfc;hb=112cf52d45497cb4b5555b6fb5ba3fb764931a0b;hp=c643bf1c23b5a8f444158d9d72d35625b9958816;hpb=12bd0f282005c57b9ec144c531390e2fa8cd1590;p=openwrt%2Fopenwrt.git

diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
index c643bf1c23..bce8d5e265 100644
--- a/target/linux/lantiq/dts/EASY80920.dtsi
+++ b/target/linux/lantiq/dts/EASY80920.dtsi
@@ -19,31 +19,10 @@
 	};
 
 	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "lantiq,localbus", "simple-bus";
-
-		};
-
 		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 
-			interrupt-parent = <&icu0>;
-			interrupts = <166 135 66 40 41 42 38>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-
 			state_default: pinmux {
 				exin3 {
 					lantiq,groups = "exin3";
@@ -119,28 +98,6 @@
 			gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 			lantiq,portmask = <0x3>;
 		};
-
-		pci@E105400 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway1";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
-				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-			reg = <0x7000000 0x8000         /* config space */
-				0xE105400 0x400>;       /* pci bridge */
-			lantiq,bus-clock = <33333333>;
-			/*lantiq,external-clock;*/
-			lantiq,delay-hi = <0>; /* 0ns delay */
-			lantiq,delay-lo = <0>; /* 0.0ns delay */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
-				>;
-			gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x1>;	/* GNT1 */
-		};
 	};
 
 	gphy-xrx200 {