X-Git-Url: http://git.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2Fmt7620a_netgear_ex3700.dts;h=8d6ee5b612cf38155bd790c7cf3fd6648a77a0e3;hb=621297e86736556f772a3a1e3907c4ad9223bd74;hp=311f27781d1a682207359c83c0ffe8f53b67f4b0;hpb=556ff0987539271647535094309605433f2aa96f;p=openwrt%2Fopenwrt.git diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts index 311f27781d..8d6ee5b612 100644 --- a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts +++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts @@ -1,57 +1,48 @@ /* This file is released into the public domain */ -/dts-v1/; - -#include -#include - -#include "mt7620a.dtsi" +#include "mt7620a_netgear_ex3x00_ex61xx.dtsi" / { compatible = "netgear,ex3700", "ralink,mt7620a-soc"; model = "Netgear EX3700/EX3800"; aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_green; + led-boot = &led_power_amber; + led-failsafe = &led_power_amber; led-running = &led_power_green; led-upgrade = &led_power_green; }; - chosen { - bootargs = "console=ttyS0,57600"; - }; - leds { compatible = "gpio-leds"; - led_power_green: power_g { + led_power_green: power_green { label = "ex3700:green:power"; gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; default-state = "on"; }; - power_a { + led_power_amber: power_amber { label = "ex3700:amber:power"; gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; }; - router_g { + router_green { label = "ex3700:green:router"; gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; }; - router_r { + router_red { label = "ex3700:red:router"; gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; }; - device_g { + device_green { label = "ex3700:green:device"; gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; }; - device_r { + device_red { label = "ex3700:red:device"; gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; }; @@ -61,109 +52,4 @@ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; }; }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "config"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0x790000>; - }; - - partition@7e0000 { - label = "board_data"; - reg = <0x7e0000 0x10000>; - read-only; - }; - - partition@7f0000 { - label = "nvram"; - reg = <0x7f0000 0x10000>; - read-only; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0 >; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0x28>; -}; - -&wmac { - ralink,mtd-eeprom = <&factory 0x0>; -}; - -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "rgmii2", "spi refclk"; - ralink,function = "gpio"; - }; - }; };