ramips: initial support for Sitecom WL-351 v1 002
authorGabor Juhos <juhosg@openwrt.org>
Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)
commitbcb2fec3bedbe98b7209cf8eee08fe3d2ea3d54a
tree6a41b3171e5967882358d0dd0925e4a97fb495d9
parente432fca647054d0565866f3cc8852d3922f50822
ramips: initial support for Sitecom WL-351 v1 002

This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604
13 files changed:
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
target/linux/ramips/base-files/etc/uci-defaults/network
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c
target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c [new file with mode: 0644]
target/linux/ramips/files/drivers/net/ramips_esw.c
target/linux/ramips/image/Makefile
target/linux/ramips/rt305x/config-2.6.39