ath79: add support for TP-Link CPE210 v1
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Sat, 20 Jul 2019 10:01:14 +0000 (12:01 +0200)
committerDavid Bauer <mail@david-bauer.net>
Wed, 7 Aug 2019 16:04:03 +0000 (18:04 +0200)
commit08857e69becc214336ba073bca6f626bfaa67781
treeaf098ae63130c0a926573480e66db02abfe07c27
parent198eae28623e9e422fe3b52ac53632fab980a561
ath79: add support for TP-Link CPE210 v1

Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/base-files/etc/board.d/03_gpio_switches
target/linux/ath79/dts/ar9344_tplink_cpe210-v1.dts [new file with mode: 0644]
target/linux/ath79/dts/ar9344_tplink_cpexxx-v1.dtsi [new file with mode: 0644]
target/linux/ath79/image/generic-tp-link.mk