--- /dev/null
+From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Date: Wed, 23 Mar 2016 00:44:40 +0300
+Subject: [PATCH] at803x: fix reset handling
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The driver of course "knows" that the chip's reset signal is active low,
+so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however
+all this will only work iff the GPIO is specified as active-high in the
+device tree! I think both the driver and the device trees (if there are
+any -- I was unable to find them) need to be fixed in this case...
+
+Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
+Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -250,7 +250,7 @@ static int at803x_probe(struct phy_devic
+ if (!priv)
+ return -ENOMEM;
+
+- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
++ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_reset))
+ return PTR_ERR(gpiod_reset);
+
+@@ -377,10 +377,10 @@ static void at803x_link_change_notify(st
+
+ at803x_context_save(phydev, &context);
+
+- gpiod_set_value(priv->gpiod_reset, 0);
+- msleep(1);
+ gpiod_set_value(priv->gpiod_reset, 1);
+ msleep(1);
++ gpiod_set_value(priv->gpiod_reset, 0);
++ msleep(1);
+
+ at803x_context_restore(phydev, &context);
+
--- /dev/null
+From: Sebastian Frias <sf84@laposte.net>
+Date: Wed, 23 Mar 2016 11:49:09 +0100
+Subject: [PATCH] net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
+
+This removes the dependency on GPIOLIB for non faulty PHYs.
+
+Indeed, without this patch, if GPIOLIB is not selected
+devm_gpiod_get_optional() will return -ENOSYS and the driver probe
+call will fail, regardless of the actual PHY hardware.
+
+Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035),
+only AT8030 presents the issues that commit 13a56b449325 ("net: phy:
+at803x: Add support for hardware reset") attempts to work-around by
+using a 'reset' GPIO line.
+
+Hence, only AT8030 should depend on GPIOLIB operating properly.
+
+Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset")
+
+Signed-off-by: Sebastian Frias <sf84@laposte.net>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -250,12 +250,16 @@ static int at803x_probe(struct phy_devic
+ if (!priv)
+ return -ENOMEM;
+
++ if (phydev->drv->phy_id != ATH8030_PHY_ID)
++ goto does_not_require_reset_workaround;
++
+ gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_reset))
+ return PTR_ERR(gpiod_reset);
+
+ priv->gpiod_reset = gpiod_reset;
+
++does_not_require_reset_workaround:
+ phydev->priv = priv;
+
+ return 0;
--- /dev/null
+From: Timur Tabi <timur@codeaurora.org>
+Date: Tue, 26 Apr 2016 12:44:18 -0500
+Subject: [PATCH] net: phy: at803x: only the AT8030 needs a hardware reset on
+ link change
+
+Commit 13a56b44 ("at803x: Add support for hardware reset") added a
+work-around for a hardware bug on the AT8030. However, the work-around
+was being called for all 803x PHYs, even those that don't need it.
+Function at803x_link_change_notify() checks to make sure that it only
+resets the PHY on the 8030, but it makes more sense to not call that
+function at all if it isn't needed.
+
+Signed-off-by: Timur Tabi <timur@codeaurora.org>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -374,27 +374,25 @@ static void at803x_link_change_notify(st
+ * in the FIFO. In such cases, the FIFO enters an error mode it
+ * cannot recover from by software.
+ */
+- if (phydev->drv->phy_id == ATH8030_PHY_ID) {
+- if (phydev->state == PHY_NOLINK) {
+- if (priv->gpiod_reset && !priv->phy_reset) {
+- struct at803x_context context;
++ if (phydev->state == PHY_NOLINK) {
++ if (priv->gpiod_reset && !priv->phy_reset) {
++ struct at803x_context context;
+
+- at803x_context_save(phydev, &context);
++ at803x_context_save(phydev, &context);
+
+- gpiod_set_value(priv->gpiod_reset, 1);
+- msleep(1);
+- gpiod_set_value(priv->gpiod_reset, 0);
+- msleep(1);
++ gpiod_set_value(priv->gpiod_reset, 1);
++ msleep(1);
++ gpiod_set_value(priv->gpiod_reset, 0);
++ msleep(1);
+
+- at803x_context_restore(phydev, &context);
++ at803x_context_restore(phydev, &context);
+
+- dev_dbg(&phydev->dev, "%s(): phy was reset\n",
+- __func__);
+- priv->phy_reset = true;
+- }
+- } else {
+- priv->phy_reset = false;
++ dev_dbg(&phydev->dev, "%s(): phy was reset\n",
++ __func__);
++ priv->phy_reset = true;
+ }
++ } else {
++ priv->phy_reset = false;
+ }
+ if (pdata && pdata->fixup_rgmii_tx_delay &&
+ phydev->speed != priv->prev_speed) {
+@@ -426,7 +424,6 @@ static struct phy_driver at803x_driver[]
+ .phy_id_mask = AT803X_PHY_ID_MASK,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+- .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
+@@ -468,7 +465,6 @@ static struct phy_driver at803x_driver[]
+ .phy_id_mask = AT803X_PHY_ID_MASK,
+ .probe = at803x_probe,
+ .config_init = at803x_config_init,
+- .link_change_notify = at803x_link_change_notify,
+ .set_wol = at803x_set_wol,
+ .get_wol = at803x_get_wol,
+ .suspend = at803x_suspend,
projects / openwrt / staging / chunkeey.git / commitdiff