prepare TQ-Components TQMa9263 kernel support
authorJo-Philipp Wich <jow@openwrt.org>
Thu, 27 Jan 2011 20:54:54 +0000 (20:54 +0000)
committerJo-Philipp Wich <jow@openwrt.org>
Thu, 27 Jan 2011 20:54:54 +0000 (20:54 +0000)
SVN-Revision: 25162

target/linux/at91/patches/600-usb_vbus_active_high.patch [new file with mode: 0644]
target/linux/at91/patches/700-tqma9263-support.patch [new file with mode: 0644]

diff --git a/target/linux/at91/patches/600-usb_vbus_active_high.patch b/target/linux/at91/patches/600-usb_vbus_active_high.patch
new file mode 100644 (file)
index 0000000..0a55ac6
--- /dev/null
@@ -0,0 +1,84 @@
+--- a/arch/arm/mach-at91/at91cap9_devices.c
++++ b/arch/arm/mach-at91/at91cap9_devices.c
+@@ -77,7 +77,7 @@
+       /* Enable VBus control for UHP ports */
+       for (i = 0; i < data->ports; i++) {
+               if (data->vbus_pin[i])
+-                      at91_set_gpio_output(data->vbus_pin[i], 0);
++                      at91_set_gpio_output(data->vbus_pin[i], data->vbus_active_high);
+       }
+       usbh_data = *data;
+--- a/arch/arm/mach-at91/at91sam9263_devices.c
++++ b/arch/arm/mach-at91/at91sam9263_devices.c
+@@ -71,7 +71,7 @@
+       /* Enable VBus control for UHP ports */
+       for (i = 0; i < data->ports; i++) {
+               if (data->vbus_pin[i])
+-                      at91_set_gpio_output(data->vbus_pin[i], 0);
++                      at91_set_gpio_output(data->vbus_pin[i], data->vbus_active_high);
+       }
+       usbh_data = *data;
+--- a/arch/arm/mach-at91/at91sam9g45_devices.c
++++ b/arch/arm/mach-at91/at91sam9g45_devices.c
+@@ -119,7 +119,7 @@
+       /* Enable VBus control for UHP ports */
+       for (i = 0; i < data->ports; i++) {
+               if (data->vbus_pin[i])
+-                      at91_set_gpio_output(data->vbus_pin[i], 0);
++                      at91_set_gpio_output(data->vbus_pin[i], data->vbus_active_high);
+       }
+       usbh_ohci_data = *data;
+@@ -174,7 +174,7 @@
+       /* Enable VBus control for UHP ports */
+       for (i = 0; i < data->ports; i++) {
+               if (data->vbus_pin[i])
+-                      at91_set_gpio_output(data->vbus_pin[i], 0);
++                      at91_set_gpio_output(data->vbus_pin[i], data->vbus_active_high);
+       }
+       usbh_ehci_data = *data;
+--- a/arch/arm/mach-at91/include/mach/board.h
++++ b/arch/arm/mach-at91/include/mach/board.h
+@@ -93,8 +93,9 @@
+  /* USB Host */
+ struct at91_usbh_data {
+-      u8              ports;          /* number of ports on root hub */
+-      u8              vbus_pin[2];    /* port power-control pin */
++      u8              ports;                  /* number of ports on root hub */
++      u8              vbus_pin[2];            /* port power-control pin */
++      u8              vbus_active_high;       /* true == vbus_pins are active high */
+ };
+ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+ extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+--- a/drivers/usb/host/ohci-at91.c
++++ b/drivers/usb/host/ohci-at91.c
+@@ -277,14 +277,13 @@
+       if (pdata) {
+               /* REVISIT make the driver support per-port power switching,
+                * and also overcurrent detection.  Here we assume the ports
+-               * are always powered while this driver is active, and use
+-               * active-low power switches.
++               * are always powered while this driver is active.
+                */
+               for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
+                       if (pdata->vbus_pin[i] <= 0)
+                               continue;
+                       gpio_request(pdata->vbus_pin[i], "ohci_vbus");
+-                      gpio_direction_output(pdata->vbus_pin[i], 0);
++                      gpio_direction_output(pdata->vbus_pin[i], pdata->vbus_active_high);
+               }
+       }
+@@ -301,7 +300,7 @@
+               for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
+                       if (pdata->vbus_pin[i] <= 0)
+                               continue;
+-                      gpio_direction_output(pdata->vbus_pin[i], 1);
++                      gpio_direction_output(pdata->vbus_pin[i], !pdata->vbus_active_high);
+                       gpio_free(pdata->vbus_pin[i]);
+               }
+       }
diff --git a/target/linux/at91/patches/700-tqma9263-support.patch b/target/linux/at91/patches/700-tqma9263-support.patch
new file mode 100644 (file)
index 0000000..941b4a6
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -317,6 +317,12 @@
+       help
+         Select this if you are using the Adeneo Neocore 926 board.
++config MACH_TQMA9263
++      bool "TQ Components TQMa9263 board"
++      help
++        Select this if you are using the an TQ Components TQMa9263 board.
++        <http://www.tq-components.com/>
++
+ endif
+ # ----------------------------------------------------------
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
+@@ -55,6 +55,7 @@
+ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+ obj-$(CONFIG_MACH_USB_A9263)  += board-usb-a9263.o
+ obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
++obj-$(CONFIG_MACH_TQMA9263)   += board-tqma9263.o
+ # AT91SAM9RL board-specific support
+ obj-$(CONFIG_MACH_AT91SAM9RLEK)       += board-sam9rlek.o