Make each logical patch group numbering contiguous.
Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[add kernel version to backport]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
--- /dev/null
+From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
+From: Tomasz Maciej Nowak <tmn505@gmail.com>
+Date: Tue, 10 Nov 2020 16:38:31 +0100
+Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
+
+With board revision 1.3, SolidRun moved the power LED to the middle of
+the board. In old place of power LED a GPIO controllable heartbeat LED
+was added. This commit only touches Single Shot variant, since only this
+variant is all revision 1.3.
+
+Note:
+This is slightly modified patch. Some boards could be placed in an
+enclosure, so the LED18 is enabled by default, since that'll be the only
+visible indicator that the board is operating.
+
+Reported-by: Alexandra Alth <alexandra@alth.de>
+Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
+---
+ .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
+@@ -5,6 +5,8 @@
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
++#include <dt-bindings/leds/common.h>
++
+ #include "armada-8040-mcbin.dtsi"
+
+ / {
+@@ -12,6 +14,20 @@
+ compatible = "marvell,armada8040-mcbin-singleshot",
+ "marvell,armada8040-mcbin", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&cp0_led18_pins>;
++ pinctrl-names = "default";
++
++ led18 {
++ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
++ function = LED_FUNCTION_HEARTBEAT;
++ color = <LED_COLOR_ID_GREEN>;
++ linux,default-trigger = "heartbeat";
++ default-state = "on";
++ };
++ };
+ };
+
+ &cp0_eth0 {
+@@ -27,3 +43,10 @@
+ managed = "in-band-status";
+ sfp = <&sfp_eth1>;
+ };
++
++&cp0_pinctrl {
++ cp0_led18_pins: led18-pins {
++ marvell,pins = "mpp33";
++ marvell,function = "gpio";
++ };
++};
+++ /dev/null
-From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 10 Nov 2020 16:38:31 +0100
-Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
-
-With board revision 1.3, SolidRun moved the power LED to the middle of
-the board. In old place of power LED a GPIO controllable heartbeat LED
-was added. This commit only touches Single Shot variant, since only this
-variant is all revision 1.3.
-
-Note:
-This is slightly modified patch. Some boards could be placed in an
-enclosure, so the LED18 is enabled by default, since that'll be the only
-visible indicator that the board is operating.
-
-Reported-by: Alexandra Alth <alexandra@alth.de>
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -5,6 +5,8 @@
- * Device Tree file for MACCHIATOBin Armada 8040 community board platform
- */
-
-+#include <dt-bindings/leds/common.h>
-+
- #include "armada-8040-mcbin.dtsi"
-
- / {
-@@ -12,6 +14,20 @@
- compatible = "marvell,armada8040-mcbin-singleshot",
- "marvell,armada8040-mcbin", "marvell,armada8040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&cp0_led18_pins>;
-+ pinctrl-names = "default";
-+
-+ led18 {
-+ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
-+ function = LED_FUNCTION_HEARTBEAT;
-+ color = <LED_COLOR_ID_GREEN>;
-+ linux,default-trigger = "heartbeat";
-+ default-state = "on";
-+ };
-+ };
- };
-
- &cp0_eth0 {
-@@ -27,3 +43,10 @@
- managed = "in-band-status";
- sfp = <&sfp_eth1>;
- };
-+
-+&cp0_pinctrl {
-+ cp0_led18_pins: led18-pins {
-+ marvell,pins = "mpp33";
-+ marvell,function = "gpio";
-+ };
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -15,6 +15,13 @@
- model = "Helios4";
- compatible = "kobol,helios4", "marvell,armada388",
- "marvell,armada385", "marvell,armada380";
-+
-+ aliases {
-+ led-boot = &led_status;
-+ led-failsafe = &led_status;
-+ led-running = &led_status;
-+ led-upgrade = &led_status;
-+ };
-
- memory {
- device_type = "memory";
-@@ -70,10 +77,9 @@
-
- system-leds {
- compatible = "gpio-leds";
-- status-led {
-+ led_status: status-led {
- label = "helios4:green:status";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
--- /dev/null
+--- a/arch/arm/boot/dts/armada-388-helios4.dts
++++ b/arch/arm/boot/dts/armada-388-helios4.dts
+@@ -15,6 +15,13 @@
+ model = "Helios4";
+ compatible = "kobol,helios4", "marvell,armada388",
+ "marvell,armada385", "marvell,armada380";
++
++ aliases {
++ led-boot = &led_status;
++ led-failsafe = &led_status;
++ led-running = &led_status;
++ led-upgrade = &led_status;
++ };
+
+ memory {
+ device_type = "memory";
+@@ -70,10 +77,9 @@
+
+ system-leds {
+ compatible = "gpio-leds";
+- status-led {
++ led_status: status-led {
+ label = "helios4:green:status";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+- linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+
--- /dev/null
+Certain SFP modules (most notably Nokia GPON ones) first check
+connectivity on 1000base-x, and switch to 2500base-x afterwards. This
+is considered a quirk so the phylink switches the interface to
+2500base-x as well.
+
+However, after power-cycling the uDPU device, network interface/SFP module
+will not work correctly until the module is re-seated. This patch
+resolves this issue by forcing the interface to be brought up in
+2500base-x mode by default.
+
+Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
+Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+
+--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+@@ -162,7 +162,7 @@
+ };
+
+ ð0 {
+- phy-mode = "sgmii";
++ phy-mode = "2500base-x";
+ status = "okay";
+ managed = "in-band-status";
+ phys = <&comphy1 0>;
+@@ -170,7 +170,7 @@
+ };
+
+ ð1 {
+- phy-mode = "sgmii";
++ phy-mode = "2500base-x";
+ status = "okay";
+ managed = "in-band-status";
+ phys = <&comphy0 1>;
+++ /dev/null
-Certain SFP modules (most notably Nokia GPON ones) first check
-connectivity on 1000base-x, and switch to 2500base-x afterwards. This
-is considered a quirk so the phylink switches the interface to
-2500base-x as well.
-
-However, after power-cycling the uDPU device, network interface/SFP module
-will not work correctly until the module is re-seated. This patch
-resolves this issue by forcing the interface to be brought up in
-2500base-x mode by default.
-
-Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
-Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -162,7 +162,7 @@
- };
-
- ð0 {
-- phy-mode = "sgmii";
-+ phy-mode = "2500base-x";
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy1 0>;
-@@ -170,7 +170,7 @@
- };
-
- ð1 {
-- phy-mode = "sgmii";
-+ phy-mode = "2500base-x";
- status = "okay";
- managed = "in-band-status";
- phys = <&comphy0 1>;
projects / openwrt / openwrt.git / commitdiff