+++ /dev/null
-From cc41a266280cad0b55319e614167c88dff344248 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 22 Feb 2020 16:33:10 +0100
-Subject: [PATCH 1/8] cpufreq: add Krait dedicated scaling driver
-
-This new driver is based on generic cpufreq-dt driver.
-Krait SoCs have 2-4 cpu and one shared L2 cache that can
-operate at different frequency based on the maximum cpu clk
-across all core.
-L2 frequency and voltage are scaled on every frequency change
-if needed. On Krait SoCs is present a bug that can cause
-transition problem between frequency bin, to workaround this
-on more than one transition, the L2 frequency is first set to the
-base rate and then to the target rate.
-The L2 frequency use the OPP framework and use the opp-level
-bindings to link the l2 freq to different cpu freq. This is needed
-as the Krait l2 clk are note mapped 1:1 to the core clks and some
-of the l2 clk is set based on a range of the cpu clks. If the driver
-find a broken config (for example no opp-level set) the l2 scaling is
-skipped.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/cpufreq/Kconfig.arm | 14 +-
- drivers/cpufreq/Makefile | 2 +
- drivers/cpufreq/qcom-cpufreq-krait.c | 589 +++++++++++++++++++++++++++
- 3 files changed, 604 insertions(+), 1 deletion(-)
- create mode 100644 drivers/cpufreq/qcom-cpufreq-krait.c
-
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -172,6 +172,18 @@ config ARM_QCOM_CPUFREQ_HW
- The driver implements the cpufreq interface for this HW engine.
- Say Y if you want to support CPUFreq HW.
-
-+config ARM_QCOM_CPUFREQ_KRAIT
-+ tristate "CPU Frequency scaling support for Krait SoCs"
-+ depends on ARCH_QCOM || COMPILE_TEST
-+ select PM_OPP
-+ select ARM_QCOM_CPUFREQ_NVMEM
-+ help
-+ This adds the CPUFreq driver for Qualcomm Krait SoC based boards.
-+ This scale the cache clk and regulator based on the different cpu
-+ clks when scaling the different cores clk.
-+
-+ If in doubt, say N.
-+
- config ARM_RASPBERRYPI_CPUFREQ
- tristate "Raspberry Pi cpufreq support"
- depends on CLK_RASPBERRYPI || COMPILE_TEST
-@@ -356,4 +368,4 @@ config ARM_PXA2xx_CPUFREQ
- help
- This add the CPUFreq driver support for Intel PXA2xx SOCs.
-
-- If in doubt, say N.
-+ If in doubt, say N.
-\ No newline at end of file
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2
- obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
- obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
- obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
-+obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRAIT) += qcom-cpufreq-krait.o
- obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
- obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
- obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
-@@ -85,6 +86,7 @@ obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += te
- obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o
- obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
- obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
-+obj-$(CONFIG_ARM_KRAIT_CPUFREQ) += krait-cpufreq.o
-
-
- ##################################################################################
---- /dev/null
-+++ b/drivers/cpufreq/qcom-cpufreq-krait.c
-@@ -0,0 +1,635 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/clk.h>
-+#include <linux/cpu.h>
-+#include <linux/cpufreq.h>
-+#include <linux/cpumask.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+
-+#include "cpufreq-dt.h"
-+
-+static struct device *l2_dev;
-+static struct mutex lock;
-+
-+struct private_data {
-+ struct opp_table *opp_table;
-+ struct device *cpu_dev;
-+ struct device *l2_dev;
-+ const char *reg_name;
-+ bool have_static_opps;
-+};
-+
-+static int set_target(struct cpufreq_policy *policy, unsigned int index)
-+{
-+ struct private_data *priv = policy->driver_data;
-+ unsigned long freq = policy->freq_table[index].frequency;
-+ unsigned long target_freq = freq * 1000;
-+ struct dev_pm_opp *opp;
-+ unsigned int level;
-+ int cpu, ret;
-+
-+ if (l2_dev) {
-+ int policy_cpu = policy->cpu;
-+
-+ mutex_lock(&lock);
-+
-+ /* find the max freq across all core */
-+ for_each_present_cpu(cpu)
-+ if (cpu != policy_cpu)
-+ target_freq = max(
-+ target_freq,
-+ (unsigned long)cpufreq_quick_get(cpu));
-+
-+ opp = dev_pm_opp_find_freq_exact(priv->cpu_dev, target_freq,
-+ true);
-+ if (IS_ERR(opp)) {
-+ dev_err(l2_dev, "failed to find OPP for %ld\n",
-+ target_freq);
-+ ret = PTR_ERR(opp);
-+ goto l2_scale_fail;
-+ }
-+ level = dev_pm_opp_get_level(opp);
-+ dev_pm_opp_put(opp);
-+
-+ /*
-+ * Hardware constraint:
-+ * Krait CPU cannot operate at 384MHz with L2 at 1Ghz.
-+ * Assume index 0 with the idle freq and level > 0 as
-+ * any L2 freq > 384MHz.
-+ * Skip CPU freq change in this corner case.
-+ */
-+ if (unlikely(index == 0 && level != 0)) {
-+ dev_err(priv->cpu_dev, "Krait CPU can't operate at idle freq with L2 at 1GHz");
-+ ret = -EINVAL;
-+ goto l2_scale_fail;
-+ }
-+
-+ opp = dev_pm_opp_find_level_exact(l2_dev, level);
-+ if (IS_ERR(opp)) {
-+ dev_err(l2_dev,
-+ "failed to find level OPP for %d\n", level);
-+ ret = PTR_ERR(opp);
-+ goto l2_scale_fail;
-+ }
-+ target_freq = dev_pm_opp_get_freq(opp);
-+ dev_pm_opp_put(opp);
-+
-+ ret = dev_pm_opp_set_rate(l2_dev, target_freq);
-+ if (ret)
-+ goto l2_scale_fail;
-+
-+ mutex_unlock(&lock);
-+ }
-+
-+ ret = dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000);
-+ if (ret)
-+ return ret;
-+
-+ arch_set_freq_scale(policy->related_cpus, freq,
-+ policy->cpuinfo.max_freq);
-+
-+ return 0;
-+l2_scale_fail:
-+ mutex_unlock(&lock);
-+
-+ return ret;
-+}
-+
-+/*
-+ * An earlier version of opp-v1 bindings used to name the regulator
-+ * "cpu0-supply", we still need to handle that for backwards compatibility.
-+ */
-+static const char *find_supply_name(struct device *dev)
-+{
-+ struct device_node *np;
-+ struct property *pp;
-+ int cpu = dev->id;
-+ const char *name = NULL;
-+
-+ np = of_node_get(dev->of_node);
-+
-+ /* This must be valid for sure */
-+ if (WARN_ON(!np))
-+ return NULL;
-+
-+ /* Try "cpu0" for older DTs */
-+ if (!cpu) {
-+ pp = of_find_property(np, "cpu0-supply", NULL);
-+ if (pp) {
-+ name = "cpu0";
-+ goto node_put;
-+ }
-+ }
-+
-+ pp = of_find_property(np, "cpu-supply", NULL);
-+ if (pp) {
-+ name = "cpu";
-+ goto node_put;
-+ }
-+
-+ dev_dbg(dev, "no regulator for cpu%d\n", cpu);
-+node_put:
-+ of_node_put(np);
-+ return name;
-+}
-+
-+static int resources_available(void)
-+{
-+ struct device *cpu_dev;
-+ struct regulator *cpu_reg;
-+ struct clk *cpu_clk;
-+ int ret = 0;
-+ const char *name;
-+
-+ cpu_dev = get_cpu_device(0);
-+ if (!cpu_dev) {
-+ pr_err("failed to get cpu0 device\n");
-+ return -ENODEV;
-+ }
-+
-+ cpu_clk = clk_get(cpu_dev, NULL);
-+ ret = PTR_ERR_OR_ZERO(cpu_clk);
-+ if (ret) {
-+ /*
-+ * If cpu's clk node is present, but clock is not yet
-+ * registered, we should try defering probe.
-+ */
-+ if (ret == -EPROBE_DEFER)
-+ dev_dbg(cpu_dev, "clock not ready, retry\n");
-+ else
-+ dev_err(cpu_dev, "failed to get clock: %d\n", ret);
-+
-+ return ret;
-+ }
-+
-+ clk_put(cpu_clk);
-+
-+ name = find_supply_name(cpu_dev);
-+ /* Platform doesn't require regulator */
-+ if (!name)
-+ return 0;
-+
-+ cpu_reg = regulator_get_optional(cpu_dev, name);
-+ ret = PTR_ERR_OR_ZERO(cpu_reg);
-+ if (ret) {
-+ /*
-+ * If cpu's regulator supply node is present, but regulator is
-+ * not yet registered, we should try defering probe.
-+ */
-+ if (ret == -EPROBE_DEFER)
-+ dev_dbg(cpu_dev, "cpu0 regulator not ready, retry\n");
-+ else
-+ dev_dbg(cpu_dev, "no regulator for cpu0: %d\n", ret);
-+
-+ return ret;
-+ }
-+
-+ regulator_put(cpu_reg);
-+ return 0;
-+}
-+
-+static int cpufreq_init(struct cpufreq_policy *policy)
-+{
-+ struct cpufreq_frequency_table *freq_table;
-+ struct opp_table *opp_table = NULL;
-+ unsigned int transition_latency;
-+ struct private_data *priv;
-+ struct device *cpu_dev;
-+ bool fallback = false;
-+ struct clk *cpu_clk;
-+ const char *name;
-+ int ret;
-+
-+ cpu_dev = get_cpu_device(policy->cpu);
-+ if (!cpu_dev) {
-+ pr_err("failed to get cpu%d device\n", policy->cpu);
-+ return -ENODEV;
-+ }
-+
-+ cpu_clk = clk_get(cpu_dev, NULL);
-+ if (IS_ERR(cpu_clk)) {
-+ ret = PTR_ERR(cpu_clk);
-+ dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret);
-+ return ret;
-+ }
-+
-+ /* Get OPP-sharing information from "operating-points-v2" bindings */
-+ ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
-+ if (ret) {
-+ if (ret != -ENOENT)
-+ goto out_put_clk;
-+
-+ /*
-+ * operating-points-v2 not supported, fallback to old method of
-+ * finding shared-OPPs for backward compatibility if the
-+ * platform hasn't set sharing CPUs.
-+ */
-+ if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
-+ fallback = true;
-+ }
-+
-+ /*
-+ * OPP layer will be taking care of regulators now, but it needs to know
-+ * the name of the regulator first.
-+ */
-+ name = find_supply_name(cpu_dev);
-+ if (name) {
-+ opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
-+ if (IS_ERR(opp_table)) {
-+ ret = PTR_ERR(opp_table);
-+ dev_err(cpu_dev,
-+ "Failed to set regulator for cpu%d: %d\n",
-+ policy->cpu, ret);
-+ goto out_put_clk;
-+ }
-+ }
-+
-+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+ if (!priv) {
-+ ret = -ENOMEM;
-+ goto out_put_regulator;
-+ }
-+
-+ priv->reg_name = name;
-+ priv->opp_table = opp_table;
-+
-+ /*
-+ * Initialize OPP tables for all policy->cpus. They will be shared by
-+ * all CPUs which have marked their CPUs shared with OPP bindings.
-+ *
-+ * For platforms not using operating-points-v2 bindings, we do this
-+ * before updating policy->cpus. Otherwise, we will end up creating
-+ * duplicate OPPs for policy->cpus.
-+ *
-+ * OPPs might be populated at runtime, don't check for error here
-+ */
-+ if (!dev_pm_opp_of_cpumask_add_table(policy->cpus))
-+ priv->have_static_opps = true;
-+
-+ /*
-+ * But we need OPP table to function so if it is not there let's
-+ * give platform code chance to provide it for us.
-+ */
-+ ret = dev_pm_opp_get_opp_count(cpu_dev);
-+ if (ret < 0) {
-+ dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
-+ ret = -EPROBE_DEFER;
-+ goto out_free_opp;
-+ }
-+
-+ if (fallback) {
-+ cpumask_setall(policy->cpus);
-+
-+ /*
-+ * OPP tables are initialized only for policy->cpu, do it for
-+ * others as well.
-+ */
-+ ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
-+ if (ret)
-+ dev_err(cpu_dev,
-+ "%s: failed to mark OPPs as shared: %d\n",
-+ __func__, ret);
-+ }
-+
-+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-+ if (ret) {
-+ dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-+ goto out_free_opp;
-+ }
-+
-+ priv->cpu_dev = cpu_dev;
-+
-+ policy->driver_data = priv;
-+ policy->clk = cpu_clk;
-+ policy->freq_table = freq_table;
-+
-+ policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
-+
-+ transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev);
-+ if (!transition_latency)
-+ transition_latency = CPUFREQ_ETERNAL;
-+
-+ policy->cpuinfo.transition_latency = transition_latency;
-+ policy->dvfs_possible_from_any_cpu = true;
-+
-+ dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-+
-+ return 0;
-+
-+out_free_opp:
-+ if (priv->have_static_opps)
-+ dev_pm_opp_of_cpumask_remove_table(policy->cpus);
-+ kfree(priv);
-+out_put_regulator:
-+ if (name)
-+ dev_pm_opp_put_regulators(opp_table);
-+out_put_clk:
-+ clk_put(cpu_clk);
-+
-+ return ret;
-+}
-+
-+static int cpufreq_online(struct cpufreq_policy *policy)
-+{
-+ /* We did light-weight tear down earlier, nothing to do here */
-+ return 0;
-+}
-+
-+static int cpufreq_offline(struct cpufreq_policy *policy)
-+{
-+ /*
-+ * Preserve policy->driver_data and don't free resources on light-weight
-+ * tear down.
-+ */
-+ return 0;
-+}
-+
-+static int cpufreq_exit(struct cpufreq_policy *policy)
-+{
-+ struct private_data *priv = policy->driver_data;
-+
-+ dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-+ if (priv->have_static_opps)
-+ dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
-+ if (priv->reg_name)
-+ dev_pm_opp_put_regulators(priv->opp_table);
-+
-+ clk_put(policy->clk);
-+ kfree(priv);
-+
-+ return 0;
-+}
-+
-+static struct freq_attr *krait_cpufreq_attr[] = {
-+ &cpufreq_freq_attr_scaling_available_freqs,
-+ NULL,
-+};
-+
-+static struct cpufreq_driver krait_cpufreq_driver = {
-+ .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
-+ CPUFREQ_IS_COOLING_DEV,
-+ .verify = cpufreq_generic_frequency_table_verify,
-+ .target_index = set_target,
-+ .get = cpufreq_generic_get,
-+ .init = cpufreq_init,
-+ .exit = cpufreq_exit,
-+ .online = cpufreq_online,
-+ .offline = cpufreq_offline,
-+ .name = "krait-cpufreq",
-+ .attr = krait_cpufreq_attr,
-+ .suspend = cpufreq_generic_suspend,
-+};
-+
-+struct krait_data {
-+ unsigned long idle_freq;
-+ bool regulator_enabled;
-+};
-+
-+static int krait_cache_set_opp(struct dev_pm_set_opp_data *data)
-+{
-+ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
-+ struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0];
-+ struct regulator *reg = data->regulators[0];
-+ struct clk *clk = data->clk;
-+ struct krait_data *kdata;
-+ unsigned long idle_freq;
-+ int ret;
-+
-+ kdata = (struct krait_data *)dev_get_drvdata(data->dev);
-+ idle_freq = kdata->idle_freq;
-+
-+ /* Scaling up? Scale voltage before frequency */
-+ if (freq >= old_freq) {
-+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
-+ supply->u_volt,
-+ supply->u_volt_max);
-+ if (ret)
-+ goto exit;
-+ }
-+
-+ /*
-+ * Set to idle bin if switching from normal to high bin
-+ * or vice versa. It has been notice that a bug is triggered
-+ * in cache scaling when more than one bin is scaled, to fix
-+ * this we first need to transition to the base rate and then
-+ * to target rate
-+ */
-+ if (likely(freq != idle_freq && old_freq != idle_freq)) {
-+ ret = clk_set_rate(clk, idle_freq);
-+ if (ret)
-+ goto exit;
-+ }
-+
-+ ret = clk_set_rate(clk, freq);
-+ if (ret)
-+ goto exit;
-+
-+ /* Scaling down? Scale voltage after frequency */
-+ if (freq < old_freq) {
-+ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
-+ supply->u_volt,
-+ supply->u_volt_max);
-+ }
-+
-+ if (unlikely(!kdata->regulator_enabled)) {
-+ ret = regulator_enable(reg);
-+ if (ret < 0)
-+ dev_warn(data->dev, "Failed to enable regulator: %d", ret);
-+ else
-+ kdata->regulator_enabled = true;
-+ }
-+
-+exit:
-+ return ret;
-+};
-+
-+static int krait_cache_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct krait_data *data;
-+ struct opp_table *table;
-+ struct dev_pm_opp *opp;
-+ struct device *cpu_dev;
-+ int ret;
-+
-+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-+ if (!data)
-+ return -ENOMEM;
-+
-+ table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1);
-+ if (IS_ERR(table)) {
-+ ret = PTR_ERR(table);
-+ if (ret != -EPROBE_DEFER)
-+ dev_err(dev, "failed to set regulators %d\n", ret);
-+
-+ return ret;
-+ }
-+
-+ ret = PTR_ERR_OR_ZERO(
-+ dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp));
-+ if (ret)
-+ return ret;
-+
-+ ret = dev_pm_opp_of_add_table(dev);
-+ if (ret) {
-+ dev_err(dev, "failed to parse L2 freq thresholds\n");
-+ return ret;
-+ }
-+
-+ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq);
-+ dev_pm_opp_put(opp);
-+
-+ /*
-+ * Check if we have at least opp-level 1, 0 should always be set to
-+ * the idle freq
-+ */
-+ opp = dev_pm_opp_find_level_exact(dev, 1);
-+ if (IS_ERR(opp)) {
-+ ret = PTR_ERR(opp);
-+ dev_err(dev,
-+ "Invalid configuration found of l2 opp. Can't find opp-level 1");
-+ goto invalid_conf;
-+ }
-+ dev_pm_opp_put(opp);
-+
-+ /*
-+ * Check opp-level configuration
-+ * At least 2 level must be set or the cache will always be scaled
-+ * the idle freq causing some performance problem
-+ *
-+ * In case of invalid configuration, the l2 scaling is skipped
-+ */
-+ cpu_dev = get_cpu_device(0);
-+ if (!cpu_dev) {
-+ pr_err("failed to get cpu0 device\n");
-+ return -ENODEV;
-+ }
-+
-+ /* With opp error assume cpufreq still has to be registred. Defer probe. */
-+ ret = dev_pm_opp_get_opp_count(cpu_dev);
-+ if (ret < 0) {
-+ ret = -EPROBE_DEFER;
-+ goto invalid_conf;
-+ }
-+
-+ /*
-+ * Check if we have at least opp-level 1 in the cpu opp, 0 should always
-+ * be set to the idle freq
-+ */
-+ opp = dev_pm_opp_find_level_exact(cpu_dev, 1);
-+ if (IS_ERR(opp)) {
-+ ret = PTR_ERR(opp);
-+ if (ret != -EPROBE_DEFER)
-+ dev_err(dev,
-+ "Invalid configuration found of cpu opp. Can't find opp-level 1");
-+ goto invalid_conf;
-+ }
-+ dev_pm_opp_put(opp);
-+
-+ platform_set_drvdata(pdev, data);
-+
-+ mutex_init(&lock);
-+
-+ /* The l2 scaling is enabled by linking the cpufreq driver */
-+ l2_dev = dev;
-+
-+ return 0;
-+
-+invalid_conf:
-+ dev_pm_opp_remove_table(dev);
-+ dev_pm_opp_put_regulators(table);
-+ dev_pm_opp_unregister_set_opp_helper(table);
-+
-+ return ret;
-+};
-+
-+static int krait_cache_remove(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct opp_table *table = dev_pm_opp_get_opp_table(dev);
-+
-+ dev_pm_opp_remove_table(dev);
-+ dev_pm_opp_put_regulators(table);
-+ dev_pm_opp_unregister_set_opp_helper(table);
-+
-+ return 0;
-+};
-+
-+static const struct of_device_id krait_cache_match_table[] = {
-+ { .compatible = "qcom,krait-cache" },
-+ {}
-+};
-+
-+static struct platform_driver krait_cache_driver = {
-+ .driver = {
-+ .name = "krait-cache",
-+ .of_match_table = krait_cache_match_table,
-+ },
-+ .probe = krait_cache_probe,
-+ .remove = krait_cache_remove,
-+};
-+module_platform_driver(krait_cache_driver);
-+
-+static int krait_cpufreq_probe(struct platform_device *pdev)
-+{
-+ struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev);
-+ int ret;
-+
-+ /*
-+ * All per-cluster (CPUs sharing clock/voltages) initialization is done
-+ * from ->init(). In probe(), we just need to make sure that clk and
-+ * regulators are available. Else defer probe and retry.
-+ *
-+ * FIXME: Is checking this only for CPU0 sufficient ?
-+ */
-+ ret = resources_available();
-+ if (ret)
-+ return ret;
-+
-+ if (data) {
-+ if (data->have_governor_per_policy)
-+ krait_cpufreq_driver.flags |=
-+ CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
-+
-+ krait_cpufreq_driver.resume = data->resume;
-+ if (data->suspend)
-+ krait_cpufreq_driver.suspend = data->suspend;
-+ }
-+
-+ ret = cpufreq_register_driver(&krait_cpufreq_driver);
-+ if (ret)
-+ dev_err(&pdev->dev, "failed register driver: %d\n", ret);
-+
-+ return ret;
-+}
-+
-+static int krait_cpufreq_remove(struct platform_device *pdev)
-+{
-+ cpufreq_unregister_driver(&krait_cpufreq_driver);
-+ return 0;
-+}
-+
-+static struct platform_driver krait_cpufreq_platdrv = {
-+ .driver = {
-+ .name = "krait-cpufreq",
-+ },
-+ .probe = krait_cpufreq_probe,
-+ .remove = krait_cpufreq_remove,
-+};
-+
-+module_platform_driver(krait_cpufreq_platdrv);
-+
-+MODULE_ALIAS("platform:krait-cpufreq");
-+MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
-+MODULE_DESCRIPTION("Dedicated Krait SoC cpufreq driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From c9ecd920324a647bf1f2b47f771c8f599cc7b551 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 22 Feb 2020 18:02:17 +0100
-Subject: [PATCH 2/8] Documentation: cpufreq: add qcom,krait-cache bindings
-
-Document dedicated cpufreq for Krait CPUs.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- .../bindings/cpufreq/qcom-cpufreq-krait.yaml | 221 ++++++++++++++++++
- 1 file changed, 221 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-krait.yaml
-@@ -0,0 +1,221 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-krait.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: CPU Frequency scaling driver for Krait SoCs
-+
-+maintainers:
-+ - Ansuel Smith <ansuelsmth@gmail.com>
-+
-+description: |
-+ The krait cpufreq driver is a dedicated frequency scaling driver
-+ based on cpufreq-dt generic driver that scale L2 cache and the
-+ cores. TEST
-+
-+ The L2 cache is scaled based on the max clk across all cores and
-+ the clock is decided based on the opp-level set in the device tree.
-+
-+ Different core freq can be linked to a specific l2 freq and the driver
-+ on frequency change will scale the core and the l2 clk based of the
-+ linked freq.
-+
-+ On Krait SoC is present a bug and on every L2 clk change the driver
-+ needs to set the clk to the idle freq before changing it to the new value.
-+
-+ This requires the qcom cpufreq nvmem driver to parse the different opp
-+ core clk and an additional opp table for the l2 scaling.
-+
-+ If the driver detect broken config (for example missing opp-level) the
-+ cpufreq driver skips the l2 scaling
-+
-+ Referring to this example opp-level can be used to link a range of cpu freq
-+ to a specific l2 freq:
-+ cpu opp freq 384000000 has opp-level 0
-+ l2 opp freq 384000000 has opp-level 0
-+ The driver will scale l2 to 384000000
-+
-+ cpu opp freq 600000000-1000000000 has opp-level 1
-+ l2 opp freq 1000000000 has opp-level 1
-+ The driver will scale l2 to 1000000000
-+
-+allOf:
-+ - $ref: /schemas/cache-controller.yaml#
-+
-+select:
-+ properties:
-+ compatible:
-+ items:
-+ - enum:
-+ - qcom,krait-cache
-+
-+ required:
-+ - compatible
-+
-+properties:
-+ compatible:
-+ items:
-+ - const: qcom,krait-cache
-+ - const: cache
-+
-+ cache-level:
-+ const: 2
-+
-+ clocks:
-+ maxItems: 1
-+
-+ clock-names:
-+ const: l2
-+
-+ l2-supply: true
-+
-+ operating-points-v2: true
-+
-+required:
-+ - compatible
-+ - cache-level
-+ - clocks
-+ - clock-names
-+ - l2-supply
-+ - operating-points-v2
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu0: cpu@0 {
-+ compatible = "qcom,krait";
-+ enable-method = "qcom,kpss-acc-v1";
-+ device_type = "cpu";
-+ reg = <0>;
-+ next-level-cache = <&L2>;
-+ qcom,acc = <&acc0>;
-+ qcom,saw = <&saw0>;
-+ clocks = <&kraitcc 0>, <&kraitcc 4>;
-+ clock-names = "cpu", "l2";
-+ clock-latency = <100000>;
-+ cpu-supply = <&smb208_s2a>;
-+ operating-points-v2 = <&opp_table0>;
-+ voltage-tolerance = <5>;
-+ cooling-min-state = <0>;
-+ cooling-max-state = <10>;
-+ #cooling-cells = <2>;
-+ cpu-idle-states = <&CPU_SPC>;
-+ };
-+
-+ /* ... */
-+
-+ };
-+
-+ opp_table0: opp_table0 {
-+ compatible = "operating-points-v2-kryo-cpu";
-+ nvmem-cells = <&speedbin_efuse>;
-+
-+ opp-384000000 {
-+ opp-hz = /bits/ 64 <384000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1000000>;
-+ opp-microvolt-speed0-pvs1-v0 = <925000>;
-+ opp-microvolt-speed0-pvs2-v0 = <875000>;
-+ opp-microvolt-speed0-pvs3-v0 = <800000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <0>;
-+ };
-+
-+ opp-600000000 {
-+ opp-hz = /bits/ 64 <600000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1050000>;
-+ opp-microvolt-speed0-pvs1-v0 = <975000>;
-+ opp-microvolt-speed0-pvs2-v0 = <925000>;
-+ opp-microvolt-speed0-pvs3-v0 = <850000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-800000000 {
-+ opp-hz = /bits/ 64 <800000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1100000>;
-+ opp-microvolt-speed0-pvs1-v0 = <1025000>;
-+ opp-microvolt-speed0-pvs2-v0 = <995000>;
-+ opp-microvolt-speed0-pvs3-v0 = <900000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-1000000000 {
-+ opp-hz = /bits/ 64 <1000000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1150000>;
-+ opp-microvolt-speed0-pvs1-v0 = <1075000>;
-+ opp-microvolt-speed0-pvs2-v0 = <1025000>;
-+ opp-microvolt-speed0-pvs3-v0 = <950000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+
-+ opp-1200000000 {
-+ opp-hz = /bits/ 64 <1200000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1200000>;
-+ opp-microvolt-speed0-pvs1-v0 = <1125000>;
-+ opp-microvolt-speed0-pvs2-v0 = <1075000>;
-+ opp-microvolt-speed0-pvs3-v0 = <1000000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <2>;
-+ };
-+
-+ opp-1400000000 {
-+ opp-hz = /bits/ 64 <1400000000>;
-+ opp-microvolt-speed0-pvs0-v0 = <1250000>;
-+ opp-microvolt-speed0-pvs1-v0 = <1175000>;
-+ opp-microvolt-speed0-pvs2-v0 = <1125000>;
-+ opp-microvolt-speed0-pvs3-v0 = <1050000>;
-+ opp-supported-hw = <0x1>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <2>;
-+ };
-+ };
-+
-+ opp_table_l2: opp_table_l2 {
-+ compatible = "operating-points-v2";
-+
-+ opp-384000000 {
-+ opp-hz = /bits/ 64 <384000000>;
-+ opp-microvolt = <1100000>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <0>;
-+ };
-+ opp-1000000000 {
-+ opp-hz = /bits/ 64 <1000000000>;
-+ opp-microvolt = <1100000>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <1>;
-+ };
-+ opp-1200000000 {
-+ opp-hz = /bits/ 64 <1200000000>;
-+ opp-microvolt = <1150000>;
-+ clock-latency-ns = <100000>;
-+ opp-level = <2>;
-+ };
-+ };
-+
-+ soc {
-+ L2: l2-cache {
-+ compatible = "qcom,krait-cache", "cache";
-+ cache-level = <2>;
-+
-+ clocks = <&kraitcc 4>;
-+ clock-names = "l2";
-+ l2-supply = <&smb208_s1a>;
-+ operating-points-v2 = <&opp_table_l2>;
-+ };
-+ };
-+
-+...
--- /dev/null
+From b044ae89862132a86fb511648e9c52ea3cdf8c30 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Wed, 5 Aug 2020 14:19:23 +0200
+Subject: [PATCH 1/4] devfreq: qcom: Add L2 Krait Cache devfreq scaling driver
+
+Qcom L2 Krait CPUs use the generic cpufreq-dt driver and doesn't actually
+scale the Cache frequency when the CPU frequency is changed. This
+devfreq driver register with the cpu notifier and scale the Cache
+based on the max Freq across all core as the CPU cache is shared across
+all of them. If provided this also scale the voltage of the regulator
+attached to the CPU cache. The scaling logic is based on the CPU freq
+and the 3 scaling interval are set by the device dts.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ drivers/devfreq/Kconfig | 11 ++
+ drivers/devfreq/Makefile | 1 +
+ drivers/devfreq/krait-cache-devfreq.c | 188 ++++++++++++++++++++++++++
+ 3 files changed, 200 insertions(+)
+ create mode 100644 drivers/devfreq/krait-cache-devfreq.c
+
+--- a/drivers/devfreq/Kconfig
++++ b/drivers/devfreq/Kconfig
+@@ -132,6 +132,17 @@ config ARM_RK3399_DMC_DEVFREQ
+ It sets the frequency for the memory controller and reads the usage counts
+ from hardware.
+
++config ARM_KRAIT_CACHE_DEVFREQ
++ tristate "Scaling support for Krait CPU Cache Devfreq"
++ depends on ARCH_QCOM || COMPILE_TEST
++ select DEVFREQ_GOV_PASSIVE
++ help
++ This adds the DEVFREQ driver for the Krait CPU L2 Cache shared by all cores.
++
++ The driver register with the cpufreq notifier and find the right frequency
++ based on the max frequency across all core and the range set in the device
++ dts. If provided this scale also the regulator attached to the l2 cache.
++
+ source "drivers/devfreq/event/Kconfig"
+
+ endif # PM_DEVFREQ
+--- a/drivers/devfreq/Makefile
++++ b/drivers/devfreq/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx
+ obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o
+ obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o
+ obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o
++obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o
+
+ # DEVFREQ Event Drivers
+ obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/
+--- /dev/null
++++ b/drivers/devfreq/krait-cache-devfreq.c
+@@ -0,0 +1,188 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/cpufreq.h>
++#include <linux/devfreq.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/slab.h>
++#include <linux/regulator/consumer.h>
++#include <linux/pm_opp.h>
++
++#include "governor.h"
++
++struct krait_cache_data {
++ struct clk *clk;
++ unsigned long idle_freq;
++};
++
++static int krait_cache_set_opp(struct dev_pm_set_opp_data *data)
++{
++ unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
++ struct dev_pm_opp_supply *supply = &data->new_opp.supplies[0];
++ struct regulator *reg = data->regulators[0];
++ struct krait_cache_data *kdata;
++ struct clk *clk = data->clk;
++ unsigned long idle_freq;
++ int ret;
++
++ kdata = dev_get_drvdata(data->dev);
++ idle_freq = kdata->idle_freq;
++
++ if (reg) {
++ ret = regulator_set_voltage_triplet(reg, supply->u_volt_min,
++ supply->u_volt,
++ supply->u_volt_max);
++ if (ret)
++ goto exit;
++ }
++
++ /*
++ * Set to idle bin if switching from normal to high bin
++ * or vice versa. It has been notice that a bug is triggered
++ * in cache scaling when more than one bin is scaled, to fix
++ * this we first need to transition to the base rate and then
++ * to target rate
++ */
++ if (likely(freq != idle_freq && old_freq != idle_freq)) {
++ ret = clk_set_rate(clk, idle_freq);
++ if (ret)
++ goto exit;
++ }
++
++ ret = clk_set_rate(clk, freq);
++ if (ret)
++ goto exit;
++
++exit:
++ return ret;
++};
++
++static int krait_cache_get_cur_freq(struct device *dev, unsigned long *freq)
++{
++ struct krait_cache_data *data = dev_get_drvdata(dev);
++
++ *freq = clk_get_rate(data->clk);
++
++ return 0;
++};
++
++static int krait_cache_target(struct device *dev, unsigned long *freq,
++ u32 flags)
++{
++ struct dev_pm_opp *opp;
++
++ opp = dev_pm_opp_find_freq_ceil(dev, freq);
++ if (unlikely(IS_ERR(opp)))
++ return PTR_ERR(opp);
++
++ dev_pm_opp_put(opp);
++
++ return dev_pm_opp_set_rate(dev, *freq);
++};
++
++static int krait_cache_get_dev_status(struct device *dev,
++ struct devfreq_dev_status *stat)
++{
++ struct krait_cache_data *data = dev_get_drvdata(dev);
++
++ stat->busy_time = 0;
++ stat->total_time = 0;
++ stat->current_frequency = clk_get_rate(data->clk);
++
++ return 0;
++};
++
++static struct devfreq_dev_profile krait_cache_devfreq_profile = {
++ .target = krait_cache_target,
++ .get_dev_status = krait_cache_get_dev_status,
++ .get_cur_freq = krait_cache_get_cur_freq
++};
++
++static struct devfreq_passive_data devfreq_gov_data = {
++ .parent_type = CPUFREQ_PARENT_DEV,
++};
++
++static int krait_cache_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct krait_cache_data *data;
++ struct opp_table *table;
++ struct devfreq *devfreq;
++ struct dev_pm_opp *opp;
++ struct clk *clk;
++ int ret;
++
++ krait_cache_devfreq_profile.freq_table = NULL;
++
++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
++ if (!data)
++ return -ENOMEM;
++
++ clk = devm_clk_get(dev, "l2");
++ if (IS_ERR(clk))
++ return PTR_ERR(clk);
++
++ table = dev_pm_opp_set_regulators(dev, (const char *[]){ "l2" }, 1);
++ if (IS_ERR(table)) {
++ ret = PTR_ERR(table);
++ dev_err_probe(dev, -EPROBE_DEFER, "failed to set regulators %d\n", ret);
++ return ret;
++ }
++
++ ret = PTR_ERR_OR_ZERO(
++ dev_pm_opp_register_set_opp_helper(dev, krait_cache_set_opp));
++ if (ret)
++ return ret;
++
++ ret = dev_pm_opp_of_add_table(dev);
++ if (ret) {
++ dev_err(dev, "failed to parse L2 freq thresholds\n");
++ return ret;
++ }
++
++ data->clk = clk;
++ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq);
++ dev_pm_opp_put(opp);
++
++ dev_set_drvdata(dev, data);
++
++ devfreq = devm_devfreq_add_device(&pdev->dev, &krait_cache_devfreq_profile,
++ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data);
++ if (IS_ERR(devfreq)) {
++ dev_pm_opp_remove_table(dev);
++ dev_pm_opp_put_regulators(table);
++ dev_pm_opp_unregister_set_opp_helper(table);
++ }
++
++ return PTR_ERR_OR_ZERO(devfreq);
++};
++
++static int krait_cache_remove(struct platform_device *pdev)
++{
++ dev_pm_opp_remove_table(&pdev->dev);
++
++ return 0;
++};
++
++static const struct of_device_id krait_cache_match_table[] = {
++ { .compatible = "qcom,krait-cache" },
++ {}
++};
++
++static struct platform_driver krait_cache_driver = {
++ .probe = krait_cache_probe,
++ .remove = krait_cache_remove,
++ .driver = {
++ .name = "krait-cache-scaling",
++ .of_match_table = krait_cache_match_table,
++ },
++};
++module_platform_driver(krait_cache_driver);
++
++MODULE_DESCRIPTION("Krait CPU Cache Scaling driver");
++MODULE_AUTHOR("Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>");
++MODULE_LICENSE("GPL v2");
projects / openwrt / openwrt.git / commitdiff