imx6: fix device-tree mac address assignment for ventana sky2/eth1
authorLuka Perkov <luka@openwrt.org>
Mon, 28 Dec 2015 04:56:27 +0000 (04:56 +0000)
committerLuka Perkov <luka@openwrt.org>
Mon, 28 Dec 2015 04:56:27 +0000 (04:56 +0000)
Some Ventana boards have a Marvell sky2 GigE controller as eth1 however
assigning the mac address through device-tree is difficult because the
PCI slot can move around depending on board configuration and slot population.

To work around this we add a patch to the sky2 driver to allow accessing its
mac address via a device-tree alias.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48013

target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch [new file with mode: 0644]
target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch [new file with mode: 0644]

diff --git a/target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-4.3/208-sky2-allow-mac-to-come-from-dt.patch
new file mode 100644 (file)
index 0000000..7a29846
--- /dev/null
@@ -0,0 +1,30 @@
+Index: linux-4.3/drivers/net/ethernet/marvell/sky2.c
+===================================================================
+--- linux-4.3.orig/drivers/net/ethernet/marvell/sky2.c 2015-11-01 16:05:25.000000000 -0800
++++ linux-4.3/drivers/net/ethernet/marvell/sky2.c      2015-12-18 10:39:44.983158318 -0800
+@@ -4812,7 +4812,24 @@
+        * 1) from device tree data
+        * 2) from internal registers set by bootloader
+        */
+-      iap = of_get_mac_address(hw->pdev->dev.of_node);
++
++      iap = NULL;
++      if (IS_ENABLED(CONFIG_OF)) {
++              struct device_node *np;
++              np = of_find_node_by_path("/aliases");
++              if (np) {
++                      const char *path = of_get_property(np, "sky2", NULL);
++                      if (path)
++                              np = of_find_node_by_path(path);
++                      if (np)
++                              path = of_get_mac_address(np);
++                      if (path)
++                              iap = (unsigned char *) path;
++              }
++      }
++
++      if (!iap)
++              iap = of_get_mac_address(hw->pdev->dev.of_node);
+       if (iap)
+               memcpy(dev->dev_addr, iap, ETH_ALEN);
+       else
diff --git a/target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch b/target/linux/imx6/patches-4.3/209-ARM-imx-ventana-add-sky2-alias.patch
new file mode 100644 (file)
index 0000000..7377ce3
--- /dev/null
@@ -0,0 +1,24 @@
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi       2015-12-18 10:39:44.959158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi    2015-12-18 10:43:21.000000000 -0800
+@@ -15,6 +15,7 @@
+       /* these are used by bootloader for disabling nodes */
+       aliases {
+               ethernet1 = &eth1;
++              sky2 = &eth1;
+               led0 = &led0;
+               led1 = &led1;
+               led2 = &led2;
+Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+===================================================================
+--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi       2015-12-18 10:39:44.959158318 -0800
++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi    2015-12-18 10:43:21.000000000 -0800
+@@ -15,6 +15,7 @@
+       /* these are used by bootloader for disabling nodes */
+       aliases {
+               ethernet1 = &eth1;
++              sky2 = &eth1;
+               led0 = &led0;
+               led1 = &led1;
+               led2 = &led2;