--- /dev/null
+From b76dc5927f6442df913f03ed261c5bff18a98df6 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Thu, 28 Dec 2017 21:01:56 +0800
+Subject: [PATCH] ARM: dts: sun8i: fix USB Ethernet of Orange Pi R1
+
+Orange Pi R1 uses a Realtek RTL8152B USB Ethernet chip, which is easily
+seen on the board but not show in the schematics. A regulator for the
+power of the RTL8152B chip is hidden, which uses the same pin with the
+Wi-Fi regulator on the original Orange Pi Zero.
+
+Add this regulator back to the device tree, and bind it to USB1.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+---
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+@@ -49,6 +49,20 @@
+
+ /delete-node/ reg_vcc_wifi;
+
++ /*
++ * Ths pin of this regulator is the same with the Wi-Fi extra
++ * regulator on the original Zero. However it's used for USB
++ * Ethernet rather than the Wi-Fi now.
++ */
++ reg_vcc_usb_eth: reg-vcc-usb-ethernet {
++ compatible = "regulator-fixed";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-name = "vcc-usb-ethernet";
++ enable-active-high;
++ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
++ };
++
+ aliases {
+ ethernet1 = &rtl8189etv;
+ };
+@@ -71,3 +85,7 @@
+ reg = <1>;
+ };
+ };
++
++&usbphy {
++ usb1_vbus-supply = <®_vcc_usb_eth>;
++};
--- /dev/null
+From 4a36ec1f82db3fa34d766dec5062b4de06b50f7f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 28 Dec 2017 14:11:36 +0100
+Subject: [PATCH] ARM: dts: sun8i: activate SPI on Orange Pi R1
+
+This board has a SPI flash, activate it also in device tree by default.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+@@ -68,6 +68,14 @@
+ };
+ };
+
++&spi0 {
++ status = "okay";
++
++ flash@0 {
++ compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
++ };
++};
++
+ &ohci1 {
+ /*
+ * RTL8152B USB-Ethernet adapter is connected to USB1,