+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
-
-START=90
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/e2guardian
-CONFIGFILE="/tmp/e2guardian/e2guardian.conf"
-LOGFILE="/tmp/e2guardian/access.log"
-GROUPCONFIG="/tmp/e2guardian/e2guardianf1.conf"
-
-validate_e2guardian_section() {
- uci_load_validate e2guardian e2guardian "$1" "$2" \
- 'accessdeniedaddress:string' \
- 'bannediplist:string' \
- 'contentscanexceptions:string' \
- 'contentscanner:string' \
- 'contentscannertimeout:uinteger' \
- 'createlistcachefiles:string' \
- 'custombannedflashfile:string' \
- 'custombannedimagefile:string' \
- 'deletedownloadedtempfiles:string' \
- 'downloadmanager:string' \
- 'exceptioniplist:string' \
- 'filecachedir:string' \
- 'filtergroups:uinteger' \
- 'filtergroupslist:string' \
- 'filterip:ipaddr' \
- 'filterports:port:8080' \
- 'forcequicksearch:string' \
- 'forwardedfor:string' \
- 'hexdecodecontent:string' \
- 'initialtrickledelay:uinteger' \
- 'ipcfilename:string' \
- 'ipipcfilename:string' \
- 'languagedir:string' \
- 'language:string' \
- 'logadblocks:string' \
- 'logchildprocesshandling:string' \
- 'logclienthostnames:string' \
- 'logconnectionhandlingerrors:string' \
- 'logexceptionhits:range(0,2)' \
- 'logfileformat:range(1,6)' \
- 'loglevel:range(0,3)' \
- 'loglocation:string' \
- 'loguseragent:string' \
- 'maxagechildren:uinteger' \
- 'maxchildren:uinteger' \
- 'maxcontentfilecachescansize:uinteger' \
- 'maxcontentfiltersize:uinteger' \
- 'maxcontentramcachescansize:uinteger' \
- 'maxips:uinteger' \
- 'maxsparechildren:uinteger' \
- 'maxuploadsize:integer' \
- 'minchildren:uinteger' \
- 'minsparechildren:uinteger' \
- 'nodaemon:string' \
- 'nologger:string' \
- 'pcontimeout:range(5,300)' \
- 'perroomdirectory:string' \
- 'phrasefiltermode:range(0,3)' \
- 'prefercachedlists:string' \
- 'preforkchildren:uinteger' \
- 'preservecase:range(0,2)' \
- 'proxyexchange:range(20,300)' \
- 'proxyip:ipaddr' \
- 'proxyport:port:3128' \
- 'proxytimeout:range(5,100)' \
- 'recheckreplacedurls:string' \
- 'reverseaddresslookups:string' \
- 'reverseclientiplookups:string' \
- 'scancleancache:string' \
- 'showweightedfound:string' \
- 'softrestart:string' \
- 'trickledelay:uinteger' \
- 'urlcacheage:uinteger' \
- 'urlcachenumber:uinteger' \
- 'urlipcfilename:string' \
- 'usecustombannedflash:string' \
- 'usecustombannedimage:string' \
- 'usexforwardedfor:string' \
- 'weightedphrasemode:range(0,2)'
-}
-
-start_e2guardian_instance() {
-
- [ "$2" = 0 ] || {
- echo "validation failed"
- return 1
- }
-
- mkdir -p $(dirname $CONFIGFILE)
- chown -R nobody:nogroup $(dirname $CONFIGFILE)
-
- mkdir -p $(dirname $loglocation)
- chown -R nobody:nogroup $(dirname $loglocation)
-
- touch $loglocation
- chown nobody:nogroup $loglocation
-
- ln -sf $loglocation $(dirname $LOGFILE)
- ln -sf /etc/e2guardian/e2guardian.conf $CONFIGFILE
- ln -sf /etc/e2guardian/e2guardianf1.conf $GROUPCONFIG
-
- echo "accessdeniedaddress = " $accessdeniedaddress > $CONFIGFILE
- echo "bannediplist = " $bannediplist >> $CONFIGFILE
-
- if [ "$contentscanner" != "" ]
- then
- echo "contentscanner = " $contentscanner >> $CONFIGFILE
- fi
-
- echo "contentscanexceptions = " $contentscanexceptions >> $CONFIGFILE
- echo "contentscannertimeout = " $contentscannertimeout >> $CONFIGFILE
- echo "createlistcachefiles = " $createlistcachefiles >> $CONFIGFILE
- echo "custombannedflashfile = " $custombannedflashfile >> $CONFIGFILE
- echo "custombannedimagefile = " $custombannedimagefile >> $CONFIGFILE
- echo "deletedownloadedtempfiles = " $deletedownloadedtempfiles >> $CONFIGFILE
- echo "downloadmanager = " $downloadmanager >> $CONFIGFILE
- echo "exceptioniplist = " $exceptioniplist >> $CONFIGFILE
- echo "filecachedir = " $filecachedir >> $CONFIGFILE
- echo "filtergroups = " $filtergroups >> $CONFIGFILE
- echo "filtergroupslist = " $filtergroupslist >> $CONFIGFILE
- echo "filterip = " $filterip >> $CONFIGFILE
- echo "filterports = " $filterports >> $CONFIGFILE
- echo "forcequicksearch = " $forcequicksearch >> $CONFIGFILE
- echo "forwardedfor = " $forwardedfor >> $CONFIGFILE
- echo "hexdecodecontent = " $hexdecodecontent >> $CONFIGFILE
- echo "initialtrickledelay = " $initialtrickledelay >> $CONFIGFILE
- echo "ipcfilename = " $ipcfilename >> $CONFIGFILE
- echo "ipipcfilename = " $ipipcfilename >> $CONFIGFILE
- echo "language = " $language >> $CONFIGFILE
- echo "languagedir = " $languagedir >> $CONFIGFILE
- echo "logadblocks = " $logadblocks >> $CONFIGFILE
- echo "logchildprocesshandling = " $logchildprocesshandling >> $CONFIGFILE
- echo "logclienthostnames = " $logclienthostnames >> $CONFIGFILE
- echo "logconnectionhandlingerrors = " $logconnectionhandlingerrors >> $CONFIGFILE
- echo "logexceptionhits = " $logexceptionhits >> $CONFIGFILE
- echo "logfileformat = " $logfileformat >> $CONFIGFILE
- echo "loglevel = " $loglevel >> $CONFIGFILE
- echo "loglocation = " $loglocation >> $CONFIGFILE
- echo "loguseragent = " $loguseragent >> $CONFIGFILE
- echo "maxagechildren = " $maxagechildren >> $CONFIGFILE
- echo "maxchildren = " $maxchildren >> $CONFIGFILE
- echo "maxcontentfilecachescansize = " $maxcontentfilecachescansize >> $CONFIGFILE
- echo "maxcontentfiltersize = " $maxcontentfiltersize >> $CONFIGFILE
- echo "maxcontentramcachescansize = " $maxcontentramcachescansize >> $CONFIGFILE
- echo "maxips = " $maxips >> $CONFIGFILE
- echo "maxsparechildren = " $maxsparechildren >> $CONFIGFILE
- echo "maxuploadsize = " $maxuploadsize >> $CONFIGFILE
- echo "minchildren = " $minchildren >> $CONFIGFILE
- echo "minsparechildren = " $minsparechildren >> $CONFIGFILE
- echo "nodaemon = " $nodaemon >> $CONFIGFILE
- echo "nologger = " $nologger >> $CONFIGFILE
- echo "pcontimeout = " $pcontimeout >> $CONFIGFILE
- echo "perroomdirectory = " $perroomdirectory >> $CONFIGFILE
- echo "phrasefiltermode = " $phrasefiltermode >> $CONFIGFILE
- echo "prefercachedlists = " $prefercachedlists >> $CONFIGFILE
- echo "preforkchildren = " $preforkchildren >> $CONFIGFILE
- echo "preservecase = " $preservecase >> $CONFIGFILE
- echo "proxyexchange = " $proxyexchange >> $CONFIGFILE
- echo "proxyip = " $proxyip >> $CONFIGFILE
- echo "proxyport = " $proxyport >> $CONFIGFILE
- echo "proxytimeout = " $proxytimeout >> $CONFIGFILE
- echo "recheckreplacedurls = " $recheckreplacedurls >> $CONFIGFILE
- echo "reverseaddresslookups = " $reverseaddresslookups >> $CONFIGFILE
- echo "reverseclientiplookups = " $reverseclientiplookups >> $CONFIGFILE
- echo "scancleancache = " $scancleancache >> $CONFIGFILE
- echo "showweightedfound = " $showweightedfound >> $CONFIGFILE
- echo "softrestart = " $softrestart >> $CONFIGFILE
- echo "trickledelay = " $trickledelay >> $CONFIGFILE
- echo "urlcacheage = " $urlcacheage >> $CONFIGFILE
- echo "urlcachenumber = " $urlcachenumber >> $CONFIGFILE
- echo "urlipcfilename = " $urlipcfilename >> $CONFIGFILE
- echo "usecustombannedflash = " $usecustombannedflash >> $CONFIGFILE
- echo "usecustombannedimage = " $usecustombannedimage >> $CONFIGFILE
- echo "usexforwardedfor = " $usexforwardedfor >> $CONFIGFILE
- echo "weightedphrasemode = " $weightedphrasemode >> $CONFIGFILE
-
- procd_open_instance
- procd_set_param command $PROG -c $CONFIGFILE
- procd_set_param file $CONFIGFILE
- procd_close_instance
-
-}
-
-start_service()
-{
- validate_e2guardian_section e2guardian start_e2guardian_instance
-}
-
-stop_service()
-{
- PID=`cat /tmp/e2guardian/e2guardian.pid`
- kill $PID
- rm -f /tmp/e2guardian/e2guardian.pid
-}
-
-service_triggers()
-{
- procd_add_reload_trigger "e2guardian"
- procd_add_validation validate_e2guardian_section
-}
+++ /dev/null
-# e2guardian filter group config file for version 3.1.2
-
-
-# Filter group mode
-# This option determines whether members of this group have their web access
-# unfiltered, filtered, or banned.
-#
-# 0 = banned
-# 1 = filtered
-# 2 = unfiltered (exception)
-#
-# Only filter groups with a mode of 1 need to define phrase, URL, site, extension,
-# mimetype and PICS lists; in other modes, these options are ignored to conserve
-# memory.
-#
-# Defaults to 0 if unspecified.
-# Unauthenticated users are treated as being in the first filter group.
-groupmode = 1
-
-# Filter group name
-# Used to fill in the -FILTERGROUP- placeholder in the HTML template file, and to
-# name the group in the access logs
-# Defaults to empty string
-#groupname = ''
-groupname = ''
-
-# Content filtering files location
-bannedphraselist = '/etc/e2guardian/lists/bannedphraselist'
-weightedphraselist = '/etc/e2guardian/lists/weightedphraselist'
-exceptionphraselist = '/etc/e2guardian/lists/exceptionphraselist'
-bannedsitelist = '/etc/e2guardian/lists/bannedsitelist'
-greysitelist = '/etc/e2guardian/lists/greysitelist'
-bannedsslsitelist = '/etc/e2guardian/lists/bannedsslsitelist'
-greysslsitelist = '/etc/e2guardian/lists/greysslsitelist'
-exceptionsitelist = '/etc/e2guardian/lists/exceptionsitelist'
-bannedurllist = '/etc/e2guardian/lists/bannedurllist'
-greyurllist = '/etc/e2guardian/lists/greyurllist'
-exceptionurllist = '/etc/e2guardian/lists/exceptionurllist'
-exceptionregexpurllist = '/etc/e2guardian/lists/exceptionregexpurllist'
-bannedregexpurllist = '/etc/e2guardian/lists/bannedregexpurllist'
-picsfile = '/etc/e2guardian/lists/pics'
-contentregexplist = '/etc/e2guardian/lists/contentregexplist'
-urlregexplist = '/etc/e2guardian/lists/urlregexplist'
-refererexceptionsitelist = '/etc/e2guardian/lists/refererexceptionsitelist'
-refererexceptionurllist = '/etc/e2guardian/lists/refererexceptionurllist'
-embededreferersitelist = '/etc/e2guardian/lists/embededreferersitelist'
-embededrefererurllist = '/etc/e2guardian/lists/embededrefererurllist'
-urlredirectregexplist = '/etc/e2guardian/lists/urlredirectregexplist'
-
-# local versions of lists (where LOCAL_LISTS enabled)
-#localbannedsitelist = '/etc/e2guardian/lists/localbannedsitelist'
-#localgreysitelist = '/etc/e2guardian/lists/localgreysitelist'
-#localexceptionsitelist = '/etc/e2guardian/lists/localexceptionsitelist'
-#localbannedurllist = '/etc/e2guardian/lists/localbannedurllist'
-#localgreyurllist = '/etc/e2guardian/lists/localgreyurllist'
-#localexceptionurllist = '/etc/e2guardian/lists/localexceptionurllist'
-#localbannedsslsitelist = '/etc/e2guardian/lists/localbannedsslsitelist'
-#localgreysslsitelist = '/etc/e2guardian/lists/localgreysslsitelist'
-#localbannedsearchlist = '/etc/e2guardian/lists/localbannedsearchlist'
-
-!! Not compiled !! authexceptionsitelist = '/etc/e2guardian/lists/authexceptionsitelist'
-!! Not compiled !! authexceptionurllist = '/etc/e2guardian/lists/authexceptionurllist'
-
-# Filetype filtering
-#
-# Allow bannedregexpurllist with grey list mode
-# bannedregexpheaderlist and bannedregexpurllist
-#
-# bannedregexwithblanketblock = off
-#
-# Blanket download blocking
-# If enabled, all files will be blocked, unless they match the
-# exceptionextensionlist or exceptionmimetypelist.
-# These lists do not override virus scanning.
-# Exception lists defined above override all types of filtering, including
-# the blanket download block.
-# Defaults to disabled.
-# (on | off)
-#
-blockdownloads = off
-exceptionextensionlist = '/etc/e2guardian/lists/exceptionextensionlist'
-exceptionmimetypelist = '/etc/e2guardian/lists/exceptionmimetypelist'
-#
-# Use the following lists to block specific kinds of file downloads.
-# The two exception lists above can be used to override these.
-#
-bannedextensionlist = '/etc/e2guardian/lists/bannedextensionlist'
-bannedmimetypelist = '/etc/e2guardian/lists/bannedmimetypelist'
-#
-# In either file filtering mode, the following list can be used to override
-# MIME type & extension blocks for particular domains & URLs (trusted download sites).
-#
-exceptionfilesitelist = '/etc/e2guardian/lists/exceptionfilesitelist'
-exceptionfileurllist = '/etc/e2guardian/lists/exceptionfileurllist'
-
-# POST protection (web upload and forms)
-# does not block forms without any file upload, i.e. this is just for
-# blocking or limiting uploads
-# measured in kibibytes after MIME encoding and header bumph
-# use 0 for a complete block
-# use higher (e.g. 512 = 512Kbytes) for limiting
-# use -1 for no blocking
-#maxuploadsize = 512
-#maxuploadsize = 0
-maxuploadsize = -1
-
-# Categorise without blocking:
-# Supply categorised lists here and the category string shall be logged against
-# matching requests, but matching these lists does not perform any filtering
-# action.
-#logsitelist = '/etc/e2guardian/lists/logsitelist'
-#logurllist = '/etc/e2guardian/lists/logurllist'
-#logregexpurllist = '/etc/e2guardian/lists/logregexpurllist'
-
-# Outgoing HTTP header rules:
-# Optional lists for blocking based on, and modification of, outgoing HTTP
-# request headers. Format for headerregexplist is one modification rule per
-# line, similar to content/URL modifications. Format for
-# bannedregexpheaderlist is one regular expression per line, with matching
-# headers causing a request to be blocked.
-# Headers are matched/replaced on a line-by-line basis, not as a contiguous
-# block.
-# Use for example, to remove cookies or prevent certain user-agents.
-headerregexplist = '/etc/e2guardian/lists/headerregexplist'
-bannedregexpheaderlist = '/etc/e2guardian/lists/bannedregexpheaderlist'
-addheaderregexplist = '/etc/e2guardian/lists/addheaderregexplist'
-
-# Weighted phrase mode
-# Optional; overrides the weightedphrasemode option in e2guardian.conf
-# for this particular group. See documentation for supported values in
-# that file.
-#weightedphrasemode = 0
-
-# Naughtiness limit
-# This the limit over which the page will be blocked. Each weighted phrase is given
-# a value either positive or negative and the values added up. Phrases to do with
-# good subjects will have negative values, and bad subjects will have positive
-# values. See the weightedphraselist file for examples.
-# As a guide:
-# 50 is for young children, 100 for old children, 160 for young adults.
-naughtynesslimit = 50
-
-# Search term blocking
-# Search terms can be extracted from search URLs and filtered using one or
-# both of two different methods.
-
-# Method 1 is that developed by Protex where specific
-# search terms are contained in a bannedsearchlist.
-# (localbannedsearchlist and bannedsearchoveridelist can be used to suppliment
-# and overide this list as required.)
-# These lists contain banned search words combinations on each line.
-# Words are separated by '+' and must be in sorted order within a line.
-# so to block 'sexy girl' then the list must contain the line
-# girl+sexy
-# and this will block both 'sexy girl' and 'girl sexy'
-# To use this method, the searchregexplist must be enabled and the bannedsearchlist(s) defined
-
-# Method 2 is uses the
-# bannedphraselist, weightedphraselist and exceptionphraselist, with a separate
-# threshold for blocking than that used for normal page content.
-# To do this, the searchregexplist must be enabled and searchtermlimit
-# must be grater than 0.
-
-#
-# Search engine regular expression list (need for both options)
-# List of regular expressions for matching search engine URLs. It is assumed
-# that the search terms themselves will be contained in the
-# of output of each expression.
-#searchregexplist = '/etc/e2guardian/lists/searchregexplist'
-#
-# Banned Search Term list(s) for option 1
-#bannedsearchlist = '/etc/e2guardian/lists/bannedsearchlist'
-#bannedsearchoveridelist = '/etc/e2guardian/lists/bannedsearchoveridelist'
-
-
-# Search term limit (for Option 2)
-# The limit over which requests will be blocked for containing search terms
-# which match the weightedphraselist. This should usually be lower than the
-# 'naughtynesslimit' value above, because the amount of text being filtered
-# is only a few words, rather than a whole page.
-# This option must be uncommented if searchregexplist is uncommented.
-# A value of 0 here indicates that search terms should be extracted,
-# but no phrase filtering should be performed on the resulting text.
-#searchtermlimit = 0
-#
-# Search term phrase lists (for Option 2)
-# If the three lines below are uncommented, search term blocking will use
-# the banned, weighted & exception phrases from these lists, instead of using
-# the same phrase lists as for page content. This is optional but recommended,
-# as weights for individual phrases in the "normal" lists may not be
-# appropriate for blocking when those phrases appear in a much smaller block
-# of text.
-# Please note that all or none of the below should be uncommented, not a
-# mixture.
-#bannedsearchtermlist = '/etc/e2guardian/lists/bannedsearchtermlist'
-#weightedsearchtermlist = '/etc/e2guardian/lists/weightedsearchtermlist'
-#exceptionsearchtermlist = '/etc/e2guardian/lists/exceptionsearchtermlist'
-
-# Category display threshold
-# This option only applies to pages blocked by weighted phrase filtering.
-# Defines the minimum score that must be accumulated within a particular
-# category in order for it to show up on the block pages' category list.
-# All categories under which the page scores positively will be logged; those
-# that were not displayed to the user appear in brackets.
-#
-# -1 = display only the highest scoring category
-# 0 = display all categories (default)
-# > 0 = minimum score for a category to be displayed
-categorydisplaythreshold = 0
-
-# Embedded URL weighting
-# When set to something greater than zero, this option causes URLs embedded within a
-# page's HTML (from links, image tags, etc.) to be extracted and checked against the
-# bannedsitelist and bannedurllist. Each link to a banned page causes the amount set
-# here to be added to the page's weighting.
-# The behaviour of this option with regards to multiple occurrences of a site/URL is
-# affected by the weightedphrasemode setting.
-#
-# NB: Currently, this feature uses regular expressions that require the PCRE library.
-# As such, it is only available if you compiled DansGuardian with '--enable-pcre=yes'.
-# You can check compile-time options by running 'e2guardian -v'.
-#
-# Set to 0 to disable.
-# Defaults to 0.
-# WARNING: This option is highly CPU intensive!
-embeddedurlweight = 0
-
-# Enable PICS rating support
-#
-# Defaults to disabled
-# (on | off)
-enablepics = off
-
-# Temporary Denied Page Bypass
-# This provides a link on the denied page to bypass the ban for a few minutes. To be
-# secure it uses a random hashed secret generated at daemon startup. You define the
-# number of seconds the bypass will function for before the deny will appear again.
-# To allow the link on the denied page to appear you will need to edit the template.html
-# or e2guardian.pl file for your language.
-# 300 = enable for 5 minutes
-# 0 = disable ( defaults to 0 )
-# -1 = enable but you require a separate program/CGI to generate a valid link
-bypass = 0
-
-# Temporary Denied Page Bypass Secret Key
-# Rather than generating a random key you can specify one. It must be more than 8 chars.
-# '' = generate a random one (recommended and default)
-# 'Mary had a little lamb.' = an example
-# '76b42abc1cd0fdcaf6e943dcbc93b826' = an example
-bypasskey = ''
-
-# Infection/Scan Error Bypass
-# Similar to the 'bypass' setting, but specifically for bypassing files scanned and found
-# to be infected, or files that trigger scanner errors - for example, archive types with
-# recognised but unsupported compression schemes, or corrupt archives.
-# The option specifies the number of seconds for which the bypass link will be valid.
-# 300 = enable for 5 minutes
-# 0 = disable (default)
-# -1 = enable, but require a separate program/CGI to generate a valid link
-infectionbypass = 0
-
-# Infection/Scan Error Bypass Secret Key
-# Same as the 'bypasskey' option, but used for infection bypass mode.
-infectionbypasskey = ''
-
-# Infection/Scan Error Bypass on Scan Errors Only
-# Enable this option to allow infectionbypass links only when virus scanning fails,
-# not when a file is found to contain a virus.
-# on = enable (default and highly recommended)
-# off = disable
-infectionbypasserrorsonly = on
-
-# Disable content scanning
-# If you enable this option you will disable content scanning for this group.
-# Content scanning primarily is AV scanning (if enabled) but could include
-# other types.
-# (on|off) default = off.
-disablecontentscan = off
-
-# Enable Deep URL Analysis
-# When enabled, DG looks for URLs within URLs, checking against the bannedsitelist and
-# bannedurllist. This can be used, for example, to block images originating from banned
-# sites from appearing in Google Images search results, as the original URLs are
-# embedded in the thumbnail GET requests.
-# (on|off) default = off
-deepurlanalysis = off
-
-# reportinglevel
-#
-# -1 = log, but do not block - Stealth mode
-# 0 = just say 'Access Denied'
-# 1 = report why but not what denied phrase
-# 2 = report fully
-# 3 = use HTML template file (accessdeniedaddress ignored) - recommended
-#
-# If defined, this overrides the global setting in e2guardian.conf for
-# members of this filter group.
-#
-reportinglevel = 3
-
-# accessdeniedaddress is the address of your web server to which the cgi
-# e2guardian reporting script was copied. Only used in reporting levels
-# 1 and 2.
-#
-# This webserver must be either:
-# 1. Non-proxied. Either a machine on the local network, or listed as an
-# exception in your browser's proxy configuration.
-# 2. Added to the exceptionsitelist. Option 1 is preferable; this option is
-# only for users using both transparent proxying and a non-local server
-# to host this script.
-#
-# If defined, this overrides the global setting in e2guardian.conf for
-# members of this filter group.
-#
-#accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/e2guardian.pl'
-
-# sslaccessdeniedaddress is the address of your web server to which the static page
-# e2guardian reporting was copied. Only used in reporting levels 3 (avoid blank page)
-# Work only in firefox with ssldeniedrewrite off
-
-# sslaccessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/denyssl.htm'
-
-# Break SSL protocol and redirect to another HTTPS website for denied page (sslaccessdeniedaddress url)
-
-#ssldeniedrewrite = 'on'
-
-# HTML Template override
-# If defined, this specifies a custom HTML template file for members of this
-# filter group, overriding the global setting in e2guardian.conf. This is
-# only used in reporting level 3.
-#
-# The default template file path is <languagedir>/<language>/template.h
-# e.g. /share/e2guardian/languages/ukenglish/template.html when using 'ukenglish'
-# language.
-#
-# This option generates a file path of the form:
-# <languagedir>/<language>/<htmltemplate>
-# e.g. /share/e2guardian/languages/ukenglish/custom.html
-#
-#htmltemplate = 'custom.html'
-
-# Non standard delimiter (only used with accessdeniedaddress)
-# To help preserve the full banned URL, including parameters, the variables
-# passed into the access denied CGI are separated using non-standard
-# delimiters. This can be useful to ensure correct operation of the filter
-# bypass modes. Parameters are split using "::" in place of "&", and "==" in
-# place of "=".
-# Default is enabled, but to go back to the standard mode, disable it.
-
-#nonstandarddelimiter = off
-
-# Email reporting - original patch by J. Gauthier
-
-# Use SMTP
-# If on, will enable system wide events to be reported by email.
-# need to configure mail program (see 'mailer' in global config)
-# and email recipients
-# default usesmtp = off
-#!! Not compiled !!usesmtp = off
-
-# mailfrom
-# who the email would come from
-# example: mailfrom = 'e2guardian@mycompany.com'
-#!! Not compiled !!mailfrom = ''
-
-# avadmin
-# who the virus emails go to (if notify av is on)
-# example: avadmin = 'admin@mycompany.com'
-#!! Not compiled !!avadmin = ''
-
-# contentdmin
-# who the content emails go to (when thresholds are exceeded)
-# and contentnotify is on
-# example: contentadmin = 'admin@mycompany.com'
-#!! Not compiled !!contentadmin = ''
-
-# avsubject
-# Subject of the email sent when a virus is caught.
-# only applicable if notifyav is on
-# default avsubject = 'e2guardian virus block'
-#!! Not compiled !!avsubject = 'e2guardian virus block'
-
-# content
-# Subject of the email sent when violation thresholds are exceeded
-# default contentsubject = 'e2guardian violation'
-#!! Not compiled !!contentsubject = 'e2guardian violation'
-
-# notifyAV
-# This will send a notification, if usesmtp/notifyav is on, any time an
-# infection is found.
-# Important: If this option is off, viruses will still be recorded like a
-# content infraction.
-#!! Not compiled !!notifyav = off
-
-# notifycontent
-# This will send a notification, if usesmtp is on, based on thresholds
-# below
-#!! Not compiled !!notifycontent = off
-
-# thresholdbyuser
-# results are only predictable with user authenticated configs
-# if enabled the violation/threshold count is kept track of by the user
-#!! Not compiled !!thresholdbyuser = off
-
-#violations
-# number of violations before notification
-# setting to 0 will never trigger a notification
-#!! Not compiled !!violations = 0
-
-#threshold
-# this is in seconds. If 'violations' occur in 'threshold' seconds, then
-# a notification is made.
-# if this is set to 0, then whenever the set number of violations are made a
-# notifaction will be sent.
-#!! Not compiled !!threshold = 0
-
-#SSL certificate checking
-# Check that ssl certificates for servers on https connections are valid
-# and signed by a ca in the configured path
-sslcertcheck = off
-
-#SSL man in the middle
-# Forge ssl certificates for all non-exception sites, decrypt the data then re encrypt it
-# using a different private key. Used to filter ssl sites
-sslmitm = off
-
-#Limit SSL MITM to sites in greysslsitelist(s)
-# ignored if sslmitm is off
-# SSL sites not matching greysslsitelist will be treat as if sslmitm is off.
-onlymitmsslgrey = off
projects / feed / packages.git / commitdiff