#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
cpu1: cpu@1 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
cpu2: cpu@2 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x2>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
cpu3: cpu@3 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x3>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
reserved-memory {
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
/* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */
secmon_reserved: secmon@43000000 {
};
soc {
- #address-cells = <2>;
- #size-cells = <2>;
compatible = "simple-bus";
ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- interrupt-controller;
reg = <0 0x0c000000 0 0x40000>, /* GICD */
<0 0x0c080000 0 0x200000>, /* GICR */
<0 0x0c400000 0 0x2000>, /* GICC */
<0 0x0c410000 0 0x1000>, /* GICH */
<0 0x0c420000 0 0x2000>; /* GICV */
-
+ interrupt-parent = <&gic>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
};
phyfw: phy-firmware@f000000 {
lvts: lvts@1100a000 {
compatible = "mediatek,mt7988-lvts";
- #thermal-sensor-cells = <1>;
reg = <0 0x1100a000 0 0x1000>;
clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
clock-names = "lvts_clk";
nvmem-cells = <&lvts_calibration>;
nvmem-cell-names = "e_data1";
+ #thermal-sensor-cells = <1>;
};
ssusb0: usb@11190000 {
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11280000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <3>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x20000000 0x00
0x20000000 0x00 0x00200000>,
<0x82000000 0x00 0x20200000 0x00
0x20200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <3>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie2_pins>;
- status = "disabled";
-
phys = <&xphyu3port0 PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc2 0>,
<0 0 0 2 &pcie_intc2 1>,
<0 0 0 3 &pcie_intc2 2>,
<0 0 0 4 &pcie_intc2 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc2: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11290000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <2>;
- interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x28000000 0x00
0x28000000 0x00 0x00200000>,
<0x82000000 0x00 0x28200000 0x00
0x28200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie3_pins>;
- status = "disabled";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc3 0>,
<0 0 0 2 &pcie_intc3 1>,
<0 0 0 3 &pcie_intc3 2>,
<0 0 0 4 &pcie_intc3 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc3: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11300000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <0>;
- interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x30000000 0x00
0x30000000 0x00 0x00200000>,
<0x82000000 0x00 0x30200000 0x00
0x30200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
- status = "disabled";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
<0 0 0 3 &pcie_intc0 2>,
<0 0 0 4 &pcie_intc0 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc0: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11310000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <1>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x38000000 0x00
0x38000000 0x00 0x00200000>,
<0x82000000 0x00 0x38200000 0x00
0x38200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie1_pins>;
- status = "disabled";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
<0 0 0 3 &pcie_intc1 2>,
<0 0 0 4 &pcie_intc1 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc1: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
tphy: tphy@11c50000 {
compatible = "mediatek,mt7988",
"mediatek,generic-tphy-v2";
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
status = "disabled";
tphyu2port0: usb-phy@11c50000 {
reg = <0 0x11c50000 0 0x700>;
xphy: xphy@11e10000 {
compatible = "mediatek,mt7988",
"mediatek,xsphy";
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
status = "disabled";
xphyu2port0: usb-phy@11e10000 {
};
ethsys: syscon@15000000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "mediatek,mt7988-ethsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
switch: switch@15020000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "mediatek,mt7988-switch";
reg = <0 0x15020000 0 0x8000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
resets = <ðrst 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ports {
#address-cells = <1>;
/* internal 2.5G PHY */
int_2p5g_phy: ethernet-phy@15 {
- reg = <15>;
compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <15>;
phy-mode = "internal";
};
};
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
cpu1: cpu@1 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
cpu2: cpu@2 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x2>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
cpu3: cpu@3 {
- device_type = "cpu";
compatible = "arm,cortex-a73";
- enable-method = "psci";
reg = <0x3>;
+ device_type = "cpu";
+ enable-method = "psci";
clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>,
<&topckgen CLK_TOP_XTAL>;
clock-names = "cpu", "intermediate";
};
reserved-memory {
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
/* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */
secmon_reserved: secmon@43000000 {
};
soc {
- #address-cells = <2>;
- #size-cells = <2>;
compatible = "simple-bus";
ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- interrupt-controller;
reg = <0 0x0c000000 0 0x40000>, /* GICD */
<0 0x0c080000 0 0x200000>, /* GICR */
<0 0x0c400000 0 0x2000>, /* GICC */
<0 0x0c410000 0 0x1000>, /* GICH */
<0 0x0c420000 0 0x2000>; /* GICV */
-
+ interrupt-parent = <&gic>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
};
phyfw: phy-firmware@f000000 {
lvts: lvts@1100a000 {
compatible = "mediatek,mt7988-lvts";
- #thermal-sensor-cells = <1>;
reg = <0 0x1100a000 0 0x1000>;
clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
clock-names = "lvts_clk";
nvmem-cells = <&lvts_calibration>;
nvmem-cell-names = "e_data1";
+ #thermal-sensor-cells = <1>;
};
ssusb0: usb@11190000 {
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11280000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <3>;
- interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x20000000 0x00
0x20000000 0x00 0x00200000>,
<0x82000000 0x00 0x20200000 0x00
0x20200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <3>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie2_pins>;
- status = "disabled";
-
phys = <&xphyu3port0 PHY_TYPE_PCIE>;
phy-names = "pcie-phy";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc2 0>,
<0 0 0 2 &pcie_intc2 1>,
<0 0 0 3 &pcie_intc2 2>,
<0 0 0 4 &pcie_intc2 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc2: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11290000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <2>;
- interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x28000000 0x00
0x28000000 0x00 0x00200000>,
<0x82000000 0x00 0x28200000 0x00
0x28200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie3_pins>;
- status = "disabled";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc3 0>,
<0 0 0 2 &pcie_intc3 1>,
<0 0 0 3 &pcie_intc3 2>,
<0 0 0 4 &pcie_intc3 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc3: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11300000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <0>;
- interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x30000000 0x00
0x30000000 0x00 0x00200000>,
<0x82000000 0x00 0x30200000 0x00
0x30200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
- status = "disabled";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
<0 0 0 3 &pcie_intc0 2>,
<0 0 0 4 &pcie_intc0 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc0: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
compatible = "mediatek,mt7988-pcie",
"mediatek,mt7986-pcie",
"mediatek,mt8192-pcie";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
reg = <0 0x11310000 0 0x2000>;
reg-names = "pcie-mac";
- linux,pci-domain = <1>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- bus-range = <0x00 0xff>;
ranges = <0x81000000 0x00 0x38000000 0x00
0x38000000 0x00 0x00200000>,
<0x82000000 0x00 0x38200000 0x00
0x38200000 0x00 0x07e00000>;
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x00 0xff>;
clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>,
<&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>,
<&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>,
"top_133m";
pinctrl-names = "default";
pinctrl-0 = <&pcie1_pins>;
- status = "disabled";
-
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
<0 0 0 3 &pcie_intc1 2>,
<0 0 0 4 &pcie_intc1 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ status = "disabled";
+
pcie_intc1: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
tphy: tphy@11c50000 {
compatible = "mediatek,mt7988",
"mediatek,generic-tphy-v2";
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
status = "disabled";
tphyu2port0: usb-phy@11c50000 {
reg = <0 0x11c50000 0 0x700>;
xphy: xphy@11e10000 {
compatible = "mediatek,mt7988",
"mediatek,xsphy";
+ ranges;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
status = "disabled";
xphyu2port0: usb-phy@11e10000 {
};
ethsys: syscon@15000000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "mediatek,mt7988-ethsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
switch: switch@15020000 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "mediatek,mt7988-switch";
reg = <0 0x15020000 0 0x8000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
resets = <ðrst 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ports {
#address-cells = <1>;
/* internal 2.5G PHY */
int_2p5g_phy: ethernet-phy@15 {
- reg = <15>;
compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <15>;
phy-mode = "internal";
};
};
projects / openwrt / openwrt.git / commitdiff