--- /dev/null
+commit b6a6cd703ffefa6352249fb01f4da28d85d17306
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu Jun 4 11:45:17 2015 -0400
+
+ fix dynamic linker regression processing R_*_NONE type relocations
+
+ commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 inadvertently removed
+ the early check for "none" type relocations, causing the address
+ dso->base+0 to be dereferenced to obtain an addend. shared libraries,
+ (including libc.so) and PIE executables were unaffected, since their
+ base addresses are the actual address of their mappings and are
+ readable. non-PIE main executables, however, have a base address of 0
+ because their load addresses are absolute and not offset at load time.
+
+ in practice none-type relocations do not arise with toolchains that
+ are in use except on mips, and on mips it's moderately rare for a
+ non-PIE executable to have a relocation table, since the mips-specific
+ got processing serves in its place for most purposes.
+
+commit 585ba14df4799d50ec9682ce75825d2eafec2a6a
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Wed Jun 3 02:00:44 2015 -0400
+
+ add additional Makefile dependency rules for rcrt1.o PIE start file
+
+commit 2b4fcfdacf93c3dfd6ac15e31790a9e154374679
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu May 28 23:08:12 2015 -0400
+
+ fix failure of ungetc and ungetwc to work on files in eof status
+
+ these functions were written to handle clearing eof status, but failed
+ to account for the __toread function's handling of eof. with this
+ patch applied, __toread still returns EOF when the file is in eof
+ status, so that read operations will fail, but it also sets up valid
+ buffer pointers for read mode, which are set to the end of the buffer
+ rather than the beginning in order to make the whole buffer available
+ to ungetc/ungetwc.
+
+ minor changes to __uflow were needed since it's now possible to have
+ non-zero buffer pointers while in eof status. as made, these changes
+ remove a 'fast path' bypassing the function call to __toread, which
+ could be reintroduced with slightly different logic, but since
+ ordinary files have a syscall in f->read, optimizing the code path
+ does not seem worthwhile.
+
+ the __stdio_read function is also updated not to zero the read buffer
+ pointers on eof/error. while not necessary for correctness, this
+ change avoids the overhead of calling __toread in ungetc after
+ reaching eof, and it also reduces code size and increases consistency
+ with the fmemopen read operation which does not zero the pointers.
+
+commit b6e7c664677ab7c77f183b8c41105f2be519800c
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu May 28 15:37:23 2015 -0400
+
+ add missing legacy LFS64 macros in sys/resource.h
+
+ based on patch by Felix Janda, with RLIM64_SAVED_CUR and
+ RLIM64_SAVED_MAX added for completeness.
+
+commit fc431d3f76bb9bde34a89e4a3e4d0c27de959855
+Author: Shiz <hi@shiz.me>
+Date: Thu May 28 05:52:22 2015 +0200
+
+ configure: work around compilers that merely warn for unknown options
+
+ some compilers (such as clang) accept unknown options without error,
+ but then print warnings on each invocation, cluttering the build
+ output and burying meaningful warnings. this patch makes configure's
+ tryflag and tryldflag functions use additional options to turn the
+ unknown-option warnings into errors, if available, but only at check
+ time. these options are not output in config.mak to avoid the risk of
+ spurious build breakage; if they work, they will have already done
+ their job at configure time.
+
+commit aeeac9ca5490d7d90fe061ab72da446c01ddf746
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Wed May 27 15:54:47 2015 -0400
+
+ implement fail-safe static locales for newlocale
+
+ this frees applications which need to make temporary use of the C
+ locale (via uselocale) from the possibility that newlocale might fail.
+
+ the C.UTF-8 locale is also provided as a static locale. presently they
+ behave the same, but this may change in the future.
+
+commit 11858d31aa020df3e7e7dedf49f9870ce12f31cc
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Wed May 27 03:32:46 2015 -0400
+
+ rename internal locale file handling locale maps
+
+ since the __setlocalecat function was removed, the filename
+ __setlocalecat.c no longer made sense.
+
+commit 61a3364d246e72b903da8b76c2e27a225a51351e
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Wed May 27 03:22:52 2015 -0400
+
+ overhaul locale internals to treat categories roughly uniformly
+
+ previously, LC_MESSAGES was treated specially as the only category
+ which could be set to a locale name without a definition file, in
+ order to facilitate gettext message translations when no libc locale
+ was available. LC_NUMERIC was completely un-settable, and LC_CTYPE
+ stored a flag intended to be used for a possible future byte-based C
+ locale, instead of storing a __locale_map pointer like the other
+ categories use.
+
+ this patch changes all categories to be represented by pointers to
+ __locale_map structures, and allows locale names without definition
+ files to be treated as valid locales with trivial definition when used
+ in any category. outwardly visible functional changes should be minor,
+ limited mainly to the strings read back from setlocale and the way
+ gettext handles translations in categories other than LC_MESSAGES.
+
+ various internal refactoring has also been performed, and improvements
+ in const correctness have been made.
+
+commit 63c188ec42e76ff768e81f6b65b11c68fc43351e
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Wed May 27 00:22:43 2015 -0400
+
+ replace atomics with locks in locale-setting code
+
+ this is part of a general program of removing direct use of atomics
+ where they are not necessary to meet correctness or performance needs,
+ but in this case it's also an optimization. only the global locale
+ needs synchronization; allocated locales referenced with locale_t
+ handles are immutable during their lifetimes, and using atomics to
+ initialize them increases their cost of setup.
+
+commit dc031ee0b1ba11baa00cd7f0769e461a5f396c71
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Tue May 26 03:37:41 2015 -0400
+
+ add rcrt1 start file for fully static-linked PIE
+
+ static-linked PIE files need startup code to relocate themselves, much
+ like the dynamic linker does. rcrt1.c reuses the code in dlstart.c,
+ stage 1 of the dynamic linker, which in turn reuses crt_arch.h, to
+ achieve static PIE with no new code. only relative relocations are
+ supported.
+
+ existing toolchains that don't yet support static PIE directly can be
+ repurposed by passing "-shared -Wl,-Bstatic -Wl,-Bsymbolic" instead of
+ "-static -pie" and substituting rcrt1.o in place of crt1.o.
+
+ all libraries being linked must be built as PIC/PIE; TEXTRELs are not
+ supported at this time.
+
+commit ed0c8249825161036356a3616e8c5247c15d0927
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Tue May 26 02:31:04 2015 -0400
+
+ fix incorrect application of visibility to Scrt1.o
+
+ commit de2b67f8d41e08caa56bf6540277f6561edb647f attempted to avoid
+ having vis.h affect crt files, but the Makefile variable used,
+ CRT_LIBS, refers to the final output copies in the lib directory, not
+ the copies in the crt build directory, and thus the -DCRT was not
+ applied.
+
+ while unlikely to be noticed, this regression probably broke
+ production of PIE executables whose main functions are not in the
+ executable but rather a shared library.
+
+commit 9bbddf730f7837cf87f4c789fbb41a312e295d6c
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 25 23:33:59 2015 -0400
+
+ reprocess all libc/ldso symbolic relocations in dynamic linking stage 3
+
+ commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 introduced early
+ relocations and subsequent reprocessing as part of the dynamic linker
+ bootstrap overhaul, to allow use of arbitrary libc functions before
+ the main application and libraries are loaded, but only reprocessed
+ GOT/PLT relocation types.
+
+ commit c093e2e8201524db0d638920e76bcb6b1d925f3a added reprocessing of
+ non-GOT/PLT relocations to fix an actual regression that was observed
+ on powerpc, but only for RELA format tables with out-of-line addends.
+ REL table (inline addends at the relocation address) reprocessing is
+ trickier because the first relocation pass clobbers the addends.
+
+ this patch extends symbolic relocation reprocessing for libc/ldso to
+ support all relocation types, whether REL or RELA format tables are
+ used. it is believed not to alter behavior on any existing archs for
+ the current dynamic linker and libc code. the motivations for this
+ change are consistency and future-proofing. it ensures that behavior
+ does not differ depending on whether REL or RELA tables are used,
+ which could lead to undetected arch-specific bugs. it also ensures
+ that, if in the future code depending on additional relocation types
+ is added to libc.so, either at the source level or as part of the
+ compiler runtime that gets pulled in (for example, soft-float with TLS
+ for fenv), the new code will work properly.
+
+ the implementation concept is simple: stage 2 of the dynamic linker
+ counts the number of symbolic relocations in the libc/ldso REL table
+ and allocates a VLA to save their addends into; stage 3 then uses the
+ saved addends in place of the inline ones which were clobbered. for
+ stack safety, a hard limit (currently 4k) is imposed on the number of
+ such addends; this should be a couple orders of magnitude larger than
+ the actual need. this number is not a runtime variable that could
+ break fail-safety; it is constant for a given libc.so build.
+
+commit 768b82c6de24e480267c4c251c440edfc71800e3
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 25 19:15:17 2015 -0400
+
+ move call to dynamic linker stage-3 into stage-2 function
+
+ this move eliminates a duplicate "by-hand" symbol lookup loop from the
+ stage-1 code and replaces it with a call to find_sym, which can be
+ used once we're in stage 2. it reduces the size of the stage 1 code,
+ which is helpful because stage 1 will become the crt start file for
+ static-PIE executables, and it will allow stage 3 to access stage 2's
+ automatic storage, which will be important in an upcoming commit.
+
+commit 967bcbf67c3ffac587de4d79abc1e5e072d83e3e
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 25 16:02:49 2015 -0400
+
+ mark mips crt code as code
+
+ otherwise disassemblers treat it as data.
+
+commit 7b75c4877ddf22f219f944c61d939df1dee4f6d3
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 25 15:56:36 2015 -0400
+
+ mark mips cancellable syscall code as code
+
+ otherwise disassemblers treat it as data.
+
+commit 0e0e49421f08cfd670975ecd3604f7f9015e1833
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 25 00:32:37 2015 -0400
+
+ simplify/shrink relocation processing in dynamic linker stage 1
+
+ the outer-loop approach made sense when we were also processing
+ DT_JMPREL, which might be in REL or RELA form, to avoid major code
+ duplication. commit 09db855b35709aa627d7055c57a98e1e471920ab removed
+ processing of DT_JMPREL, and in the remaining two tables, the format
+ (REL or RELA) is known by the name of the table. simply writing two
+ versions of the loop results in smaller and simpler code.
+
+commit 09db855b35709aa627d7055c57a98e1e471920ab
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 25 00:25:56 2015 -0400
+
+ remove processing of DT_JMPREL from dynamic linker stage 1 bootstrap
+
+ the DT_JMPREL relocation table necessarily consists entirely of
+ JMP_SLOT (REL_PLT in internal nomenclature) relocations, which are
+ symbolic; they cannot be resolved in stage 1, so there is no point in
+ processing them.
+
+commit 9f26ebded188ed78c3571a4ca1477dd6351bc647
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Sun May 24 23:03:47 2015 -0400
+
+ fix stack alignment code in mips crt_arch.h
+
+ the instruction used to align the stack, "and $sp, $sp, -8", does not
+ actually exist; it's expanded to 2 instructions using the 'at'
+ (assembler temporary) register, and thus cannot be used in a branch
+ delay slot. since alignment mod 16 commutes with subtracting 8, simply
+ swapping these two operations fixes the problem.
+
+ crt1.o was not affected because it's still being generated from a
+ dedicated asm source file. dlstart.lo was not affected because the
+ stack pointer it receives is already aligned by the kernel. but
+ Scrt1.o was affected in cases where the dynamic linker gave it a
+ misaligned stack pointer.
+
+commit 63caf1d207d143fe405bbe0cda9aac8deca1171a
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Fri May 22 01:50:05 2015 -0400
+
+ add .text section directive to all crt_arch.h files missing it
+
+ i386 and x86_64 versions already had the .text directive; other archs
+ did not. normally, top-level (file scope) __asm__ starts in the .text
+ section anyway, but problems were reported with some versions of
+ clang, and it seems preferable to set it explicitly anyway, at least
+ for the sake of consistency between archs.
+
+commit 3b0e83264d156f9e496ab32badd89e4447b807aa
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu May 21 17:06:28 2015 -0400
+
+ remove outdated and misleading comment in iconv.c
+
+ the comment claimed that EUC/GBK/Big5 are not implemented, which has
+ been incorrect since commit 19b4a0a20efc6b9df98b6a43536ecdd628ba4643.
+
+commit 39b8ce66f2ed9c17427ec3a48be9bda29b93b9d7
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu May 21 17:01:23 2015 -0400
+
+ in iconv_open, accept "CHAR" and "" as aliases for "UTF-8"
+
+ while not a requirement, it's common convention in other iconv
+ implementations to accept "CHAR" as an alias for nl_langinfo(CODESET),
+ meaning the encoding used for char[] strings in the current locale,
+ and also "" as an alternate form. supporting this is not costly and
+ improves compatibility.
+
+commit c648cefb27984db60474ec1747cbfde83c2856d0
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Wed May 20 00:17:35 2015 -0400
+
+ fix inconsistency in a_and and a_or argument types on x86[_64]
+
+ conceptually, and on other archs, these functions take a pointer to
+ int, but in the i386, x86_64, and x32 versions of atomic.h, they took
+ a pointer to void instead.
+
+commit 390f93ef69153bf2087fcf3baa1776ad9a6765ab
+Author: Bobby Bingham <koorogi@koorogi.info>
+Date: Sun May 17 13:46:38 2015 -0500
+
+ inline llsc atomics when building for sh4a
+
+ If we're building for sh4a, the compiler is already free to use
+ instructions only available on sh4a, so we can do the same and inline the
+ llsc atomics. If we're building for an older processor, we still do the
+ same runtime atomics selection as before.
+
+commit c093e2e8201524db0d638920e76bcb6b1d925f3a
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 18 16:51:54 2015 -0400
+
+ reprocess libc/ldso RELA relocations in stage 3 of dynamic linking
+
+ this fixes a regression on powerpc that was introduced in commit
+ f3ddd173806fd5c60b3f034528ca24542aecc5b9. global data accesses on
+ powerpc seem to be using a translation-unit-local GOT filled via
+ R_PPC_ADDR32 relocations rather than R_PPC_GLOB_DAT. being a non-GOT
+ relocation type, these were not reprocessed after adding the main
+ application and its libraries to the chain, causing libc code not to
+ see copy relocations in the main program, and therefore to use the
+ pre-copy-relocation addresses for global data objects (like environ).
+
+ the motivation for the dynamic linker only reprocessing GOT/PLT
+ relocation types in stage 3 is that these types always have a zero
+ addend, making them safe to process again even if the storage for the
+ addend has been clobbered. other relocation types which can be used
+ for address constants in initialized data objects may have non-zero
+ addends which will be clobbered during the first pass of relocation
+ processing if they're stored inline (REL form) rather than out-of-line
+ (RELA form).
+
+ powerpc generally uses only RELA, so this patch is sufficient to fix
+ the regression in practice, but is not fully general, and would not
+ suffice if an alternate toolchain generated REL for powerpc.
+
+commit 43e9f652bf4b2195b04fc14c93db591b30a7b790
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Mon May 18 12:11:25 2015 -0400
+
+ fix null pointer dereference in dcngettext under specific conditions
+
+ if setlocale has not been called, the current locale's messages_name
+ may be a null pointer. the code path where it's assumed to be non-null
+ was only reachable if bindtextdomain had already been called, which is
+ normally not done in programs which do not call setlocale, so the
+ omitted check went unnoticed.
+
+ patch from Void Linux, with description rewritten.
+
+commit 68630b55c0c7219fe9df70dc28ffbf9efc8021d8
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Sat May 16 01:53:54 2015 -0400
+
+ eliminate costly tricks to avoid TLS access for current locale state
+
+ the code being removed used atomics to track whether any threads might
+ be using a locale other than the current global locale, and whether
+ any threads might have abstract 8-bit (non-UTF-8) LC_CTYPE active, a
+ feature which was never committed (still pending). the motivations
+ were to support early execution prior to setup of the thread pointer,
+ to partially support systems (ancient kernels) where thread pointer
+ setup is not possible, and to avoid high performance cost on archs
+ where accessing the thread pointer may be very slow.
+
+ since commit 19a1fe670acb3ab9ead0fe31859ca7d4fe40dd54, the thread
+ pointer is always available, so these hacks are no longer needed.
+ removing them greatly simplifies the affected code.
+
+commit 707d7c30f3379441de9b320536ddfd354f4c2143
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Sat May 16 01:15:40 2015 -0400
+
+ in i386 __set_thread_area, don't assume %gs register is initially zero
+
+ commit f630df09b1fd954eda16e2f779da0b5ecc9d80d3 added logic to handle
+ the case where __set_thread_area is called more than once by reusing
+ the GDT slot already in the %gs register, and only setting up a new
+ GDT slot when %gs is zero. this created a hidden assumption that %gs
+ is zero when a new process image starts, which is true in practice on
+ Linux, but does not seem to be documented ABI, and fails to hold under
+ qemu app-level emulation.
+
+ while it would in theory be possible to zero %gs in the entry point
+ code, this code is shared between static and dynamic binaries, and
+ dynamic binaries must not clobber the value of %gs already setup by
+ the dynamic linker.
+
+ the alternative solution implemented in this commit simply uses global
+ data to store the GDT index that's selected. __set_thread_area should
+ only be called in the initial thread anyway (subsequent threads get
+ their thread pointer setup by __clone), but even if it were called by
+ another thread, it would simply read and write back the same GDT index
+ that was already assigned to the initial thread, and thus (in the x86
+ memory model) there is no data race.
+
+commit c0f10cf06725bd0de37f3ced7954a653bf9f1049
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu May 14 18:51:27 2015 -0400
+
+ make arm reloc.h CRTJMP macro compatible with thumb
+
+ compilers targeting armv7 may be configured to produce thumb2 code
+ instead of arm code by default, and in the future we may wish to
+ support targets where only the thumb instruction set is available.
+
+ the instructions this patch omits in thumb mode are needed only for
+ non-thumb versions of armv4 or earlier, which are not supported by any
+ current compilers/toolchains and thus rather pointless to have. at
+ some point these compatibility return sequences may be removed from
+ all asm source files, and in that case it would make sense to remove
+ them here too and remove the ifdef.
+
+commit 83340c7a580e91b22f58321b7cf6d976af61084c
+Author: Rich Felker <dalias@aerifal.cx>
+Date: Thu May 14 18:26:16 2015 -0400
+
+ make arm crt_arch.h compatible with thumb code generation
+
+ compilers targeting armv7 may be configured to produce thumb2 code
+ instead of arm code by default, and in the future we may wish to
+ support targets where only the thumb instruction set is available.
+
+ the changes made here avoid operating directly on the sp register,
+ which is not possible in thumb code, and address an issue with the way
+ the address of _DYNAMIC is computed.
+
+ previously, the relative address of _DYNAMIC was stored with an
+ additional offset of -8 versus the pc-relative add instruction, since
+ on arm the pc register evaluates to ".+8". in thumb code, it instead
+ evaluates to ".+4". both are two (normal-size) instructions beyond "."
+ in the current execution mode, so the numbered label 2 used in the
+ relative address expression is simply moved two instructions ahead to
+ be compatible with both instruction sets.
+
+--- a/Makefile
++++ b/Makefile
+@@ -44,7 +44,7 @@ ALL_INCLUDES = $(sort $(wildcard include
+
+ EMPTY_LIB_NAMES = m rt pthread crypt util xnet resolv dl
+ EMPTY_LIBS = $(EMPTY_LIB_NAMES:%=lib/lib%.a)
+-CRT_LIBS = lib/crt1.o lib/Scrt1.o lib/crti.o lib/crtn.o
++CRT_LIBS = lib/crt1.o lib/Scrt1.o lib/rcrt1.o lib/crti.o lib/crtn.o
+ STATIC_LIBS = lib/libc.a
+ SHARED_LIBS = lib/libc.so
+ TOOL_LIBS = lib/musl-gcc.specs
+@@ -85,11 +85,13 @@ src/internal/version.h: $(wildcard VERSI
+
+ src/internal/version.lo: src/internal/version.h
+
+-src/ldso/dlstart.lo src/ldso/dynlink.lo: src/internal/dynlink.h arch/$(ARCH)/reloc.h
++crt/rcrt1.o src/ldso/dlstart.lo src/ldso/dynlink.lo: src/internal/dynlink.h arch/$(ARCH)/reloc.h
+
+-crt/crt1.o crt/Scrt1.o src/ldso/dlstart.lo: $(wildcard arch/$(ARCH)/crt_arch.h)
++crt/crt1.o crt/Scrt1.o crt/rcrt1.o src/ldso/dlstart.lo: $(wildcard arch/$(ARCH)/crt_arch.h)
+
+-crt/Scrt1.o: CFLAGS += -fPIC
++crt/rcrt1.o: src/ldso/dlstart.c
++
++crt/Scrt1.o crt/rcrt1.o: CFLAGS += -fPIC
+
+ OPTIMIZE_SRCS = $(wildcard $(OPTIMIZE_GLOBS:%=src/%))
+ $(OPTIMIZE_SRCS:%.c=%.o) $(OPTIMIZE_SRCS:%.c=%.lo): CFLAGS += -O3
+@@ -104,7 +106,7 @@ NOSSP_SRCS = $(wildcard crt/*.c) \
+ src/ldso/dlstart.c src/ldso/dynlink.c
+ $(NOSSP_SRCS:%.c=%.o) $(NOSSP_SRCS:%.c=%.lo): CFLAGS += $(CFLAGS_NOSSP)
+
+-$(CRT_LIBS): CFLAGS += -DCRT
++$(CRT_LIBS:lib/%=crt/%): CFLAGS += -DCRT
+
+ # This incantation ensures that changes to any subarch asm files will
+ # force the corresponding object file to be rebuilt, even if the implicit
+--- a/arch/aarch64/crt_arch.h
++++ b/arch/aarch64/crt_arch.h
+@@ -1,4 +1,5 @@
+ __asm__(
++".text \n"
+ ".global " START "\n"
+ ".type " START ",%function\n"
+ START ":\n"
+--- a/arch/arm/crt_arch.h
++++ b/arch/arm/crt_arch.h
+@@ -1,15 +1,18 @@
+ __asm__(
++".text \n"
+ ".global " START " \n"
+ ".type " START ",%function \n"
+ START ": \n"
+ " mov fp, #0 \n"
+ " mov lr, #0 \n"
+-" mov a1, sp \n"
+ " ldr a2, 1f \n"
+-"2: add a2, pc, a2 \n"
+-" and sp, sp, #-16 \n"
++" add a2, pc, a2 \n"
++" mov a1, sp \n"
++"2: and ip, a1, #-16 \n"
++" mov sp, ip \n"
+ " bl " START "_c \n"
+ ".weak _DYNAMIC \n"
+ ".hidden _DYNAMIC \n"
+-"1: .word _DYNAMIC-2b-8 \n"
++".align 2 \n"
++"1: .word _DYNAMIC-2b \n"
+ );
+--- a/arch/arm/reloc.h
++++ b/arch/arm/reloc.h
+@@ -28,5 +28,10 @@
+ #define REL_TPOFF R_ARM_TLS_TPOFF32
+ //#define REL_TLSDESC R_ARM_TLS_DESC
+
++#ifdef __thumb__
++#define CRTJMP(pc,sp) __asm__ __volatile__( \
++ "mov sp,%1 ; bx %0" : : "r"(pc), "r"(sp) : "memory" )
++#else
+ #define CRTJMP(pc,sp) __asm__ __volatile__( \
+ "mov sp,%1 ; tst %0,#1 ; moveq pc,%0 ; bx %0" : : "r"(pc), "r"(sp) : "memory" )
++#endif
+--- a/arch/i386/atomic.h
++++ b/arch/i386/atomic.h
+@@ -50,16 +50,16 @@ static inline int a_cas(volatile int *p,
+ return t;
+ }
+
+-static inline void a_or(volatile void *p, int v)
++static inline void a_or(volatile int *p, int v)
+ {
+ __asm__( "lock ; orl %1, %0"
+- : "=m"(*(int *)p) : "r"(v) : "memory" );
++ : "=m"(*p) : "r"(v) : "memory" );
+ }
+
+-static inline void a_and(volatile void *p, int v)
++static inline void a_and(volatile int *p, int v)
+ {
+ __asm__( "lock ; andl %1, %0"
+- : "=m"(*(int *)p) : "r"(v) : "memory" );
++ : "=m"(*p) : "r"(v) : "memory" );
+ }
+
+ static inline int a_swap(volatile int *x, int v)
+--- a/arch/microblaze/crt_arch.h
++++ b/arch/microblaze/crt_arch.h
+@@ -1,4 +1,5 @@
+ __asm__(
++".text \n"
+ ".global " START " \n"
+ ".align 2 \n"
+ START ": \n"
+--- a/arch/mips/crt_arch.h
++++ b/arch/mips/crt_arch.h
+@@ -1,6 +1,7 @@
+ __asm__(
+ ".set push\n"
+ ".set noreorder\n"
++".text \n"
+ ".global _" START "\n"
+ ".global " START "\n"
+ ".type _" START ", @function\n"
+@@ -21,8 +22,8 @@ __asm__(
+ " addu $5, $5, $gp \n"
+ " lw $25, 4($ra) \n"
+ " addu $25, $25, $gp \n"
+-" subu $sp, $sp, 16 \n"
++" and $sp, $sp, -8 \n"
+ " jalr $25 \n"
+-" and $sp, $sp, -8 \n"
++" subu $sp, $sp, 16 \n"
+ ".set pop \n"
+ );
+--- a/arch/or1k/crt_arch.h
++++ b/arch/or1k/crt_arch.h
+@@ -1,4 +1,5 @@
+ __asm__(
++".text \n"
+ ".global " START " \n"
+ ".align 4 \n"
+ START ": \n"
+--- a/arch/powerpc/crt_arch.h
++++ b/arch/powerpc/crt_arch.h
+@@ -1,4 +1,5 @@
+ __asm__(
++".text \n"
+ ".global " START " \n"
+ ".type " START ", %function \n"
+ START ": \n"
+--- a/arch/sh/atomic.h
++++ b/arch/sh/atomic.h
+@@ -22,6 +22,88 @@ static inline int a_ctz_64(uint64_t x)
+ return a_ctz_l(y);
+ }
+
++#define LLSC_CLOBBERS "r0", "t", "memory"
++#define LLSC_START(mem) "synco\n" \
++ "0: movli.l @" mem ", r0\n"
++#define LLSC_END(mem) \
++ "1: movco.l r0, @" mem "\n" \
++ " bf 0b\n" \
++ " synco\n"
++
++static inline int __sh_cas_llsc(volatile int *p, int t, int s)
++{
++ int old;
++ __asm__ __volatile__(
++ LLSC_START("%1")
++ " mov r0, %0\n"
++ " cmp/eq %0, %2\n"
++ " bf 1f\n"
++ " mov %3, r0\n"
++ LLSC_END("%1")
++ : "=&r"(old) : "r"(p), "r"(t), "r"(s) : LLSC_CLOBBERS);
++ return old;
++}
++
++static inline int __sh_swap_llsc(volatile int *x, int v)
++{
++ int old;
++ __asm__ __volatile__(
++ LLSC_START("%1")
++ " mov r0, %0\n"
++ " mov %2, r0\n"
++ LLSC_END("%1")
++ : "=&r"(old) : "r"(x), "r"(v) : LLSC_CLOBBERS);
++ return old;
++}
++
++static inline int __sh_fetch_add_llsc(volatile int *x, int v)
++{
++ int old;
++ __asm__ __volatile__(
++ LLSC_START("%1")
++ " mov r0, %0\n"
++ " add %2, r0\n"
++ LLSC_END("%1")
++ : "=&r"(old) : "r"(x), "r"(v) : LLSC_CLOBBERS);
++ return old;
++}
++
++static inline void __sh_store_llsc(volatile int *p, int x)
++{
++ __asm__ __volatile__(
++ " synco\n"
++ " mov.l %1, @%0\n"
++ " synco\n"
++ : : "r"(p), "r"(x) : "memory");
++}
++
++static inline void __sh_and_llsc(volatile int *x, int v)
++{
++ __asm__ __volatile__(
++ LLSC_START("%0")
++ " and %1, r0\n"
++ LLSC_END("%0")
++ : : "r"(x), "r"(v) : LLSC_CLOBBERS);
++}
++
++static inline void __sh_or_llsc(volatile int *x, int v)
++{
++ __asm__ __volatile__(
++ LLSC_START("%0")
++ " or %1, r0\n"
++ LLSC_END("%0")
++ : : "r"(x), "r"(v) : LLSC_CLOBBERS);
++}
++
++#ifdef __SH4A__
++#define a_cas(p,t,s) __sh_cas_llsc(p,t,s)
++#define a_swap(x,v) __sh_swap_llsc(x,v)
++#define a_fetch_add(x,v) __sh_fetch_add_llsc(x, v)
++#define a_store(x,v) __sh_store_llsc(x, v)
++#define a_and(x,v) __sh_and_llsc(x, v)
++#define a_or(x,v) __sh_or_llsc(x, v)
++#else
++
+ int __sh_cas(volatile int *, int, int);
+ int __sh_swap(volatile int *, int);
+ int __sh_fetch_add(volatile int *, int);
+@@ -35,6 +117,7 @@ void __sh_or(volatile int *, int);
+ #define a_store(x,v) __sh_store(x, v)
+ #define a_and(x,v) __sh_and(x, v)
+ #define a_or(x,v) __sh_or(x, v)
++#endif
+
+ static inline void *a_cas_p(volatile void *p, void *t, void *s)
+ {
+--- a/arch/sh/crt_arch.h
++++ b/arch/sh/crt_arch.h
+@@ -1,4 +1,5 @@
+ __asm__(
++".text \n"
+ ".global " START " \n"
+ START ": \n"
+ " mova 1f, r0 \n"
+--- a/arch/sh/src/atomic.c
++++ b/arch/sh/src/atomic.c
+@@ -1,12 +1,7 @@
+-#include "libc.h"
++#ifndef __SH4A__
+
+-#define LLSC_CLOBBERS "r0", "t", "memory"
+-#define LLSC_START(mem) "synco\n" \
+- "0: movli.l @" mem ", r0\n"
+-#define LLSC_END(mem) \
+- "1: movco.l r0, @" mem "\n" \
+- " bf 0b\n" \
+- " synco\n"
++#include "atomic.h"
++#include "libc.h"
+
+ /* gusa is a hack in the kernel which lets you create a sequence of instructions
+ * which will be restarted if the process is preempted in the middle of the
+@@ -34,114 +29,74 @@
+
+ int __sh_cas(volatile int *p, int t, int s)
+ {
++ if (__hwcap & CPU_HAS_LLSC) return __sh_cas_llsc(p, t, s);
++
+ int old;
+- if (__hwcap & CPU_HAS_LLSC) {
+- __asm__ __volatile__(
+- LLSC_START("%1")
+- " mov r0, %0\n"
+- " cmp/eq %0, %2\n"
+- " bf 1f\n"
+- " mov %3, r0\n"
+- LLSC_END("%1")
+- : "=&r"(old) : "r"(p), "r"(t), "r"(s) : LLSC_CLOBBERS);
+- } else {
+- __asm__ __volatile__(
+- GUSA_START_EVEN("%1", "%0")
+- " cmp/eq %0, %2\n"
+- " bf 1f\n"
+- GUSA_END("%1", "%3")
+- : "=&r"(old) : "r"(p), "r"(t), "r"(s) : GUSA_CLOBBERS, "t");
+- }
++ __asm__ __volatile__(
++ GUSA_START_EVEN("%1", "%0")
++ " cmp/eq %0, %2\n"
++ " bf 1f\n"
++ GUSA_END("%1", "%3")
++ : "=&r"(old) : "r"(p), "r"(t), "r"(s) : GUSA_CLOBBERS, "t");
+ return old;
+ }
+
+ int __sh_swap(volatile int *x, int v)
+ {
++ if (__hwcap & CPU_HAS_LLSC) return __sh_swap_llsc(x, v);
++
+ int old;
+- if (__hwcap & CPU_HAS_LLSC) {
+- __asm__ __volatile__(
+- LLSC_START("%1")
+- " mov r0, %0\n"
+- " mov %2, r0\n"
+- LLSC_END("%1")
+- : "=&r"(old) : "r"(x), "r"(v) : LLSC_CLOBBERS);
+- } else {
+- __asm__ __volatile__(
+- GUSA_START_EVEN("%1", "%0")
+- GUSA_END("%1", "%2")
+- : "=&r"(old) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+- }
++ __asm__ __volatile__(
++ GUSA_START_EVEN("%1", "%0")
++ GUSA_END("%1", "%2")
++ : "=&r"(old) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+ return old;
+ }
+
+ int __sh_fetch_add(volatile int *x, int v)
+ {
++ if (__hwcap & CPU_HAS_LLSC) return __sh_fetch_add_llsc(x, v);
++
+ int old, dummy;
+- if (__hwcap & CPU_HAS_LLSC) {
+- __asm__ __volatile__(
+- LLSC_START("%1")
+- " mov r0, %0\n"
+- " add %2, r0\n"
+- LLSC_END("%1")
+- : "=&r"(old) : "r"(x), "r"(v) : LLSC_CLOBBERS);
+- } else {
+- __asm__ __volatile__(
+- GUSA_START_EVEN("%2", "%0")
+- " mov %0, %1\n"
+- " add %3, %1\n"
+- GUSA_END("%2", "%1")
+- : "=&r"(old), "=&r"(dummy) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+- }
++ __asm__ __volatile__(
++ GUSA_START_EVEN("%2", "%0")
++ " mov %0, %1\n"
++ " add %3, %1\n"
++ GUSA_END("%2", "%1")
++ : "=&r"(old), "=&r"(dummy) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+ return old;
+ }
+
+ void __sh_store(volatile int *p, int x)
+ {
+- if (__hwcap & CPU_HAS_LLSC) {
+- __asm__ __volatile__(
+- " synco\n"
+- " mov.l %1, @%0\n"
+- " synco\n"
+- : : "r"(p), "r"(x) : "memory");
+- } else {
+- __asm__ __volatile__(
+- " mov.l %1, @%0\n"
+- : : "r"(p), "r"(x) : "memory");
+- }
++ if (__hwcap & CPU_HAS_LLSC) return __sh_store_llsc(p, x);
++ __asm__ __volatile__(
++ " mov.l %1, @%0\n"
++ : : "r"(p), "r"(x) : "memory");
+ }
+
+ void __sh_and(volatile int *x, int v)
+ {
++ if (__hwcap & CPU_HAS_LLSC) return __sh_and_llsc(x, v);
++
+ int dummy;
+- if (__hwcap & CPU_HAS_LLSC) {
+- __asm__ __volatile__(
+- LLSC_START("%0")
+- " and %1, r0\n"
+- LLSC_END("%0")
+- : : "r"(x), "r"(v) : LLSC_CLOBBERS);
+- } else {
+- __asm__ __volatile__(
+- GUSA_START_ODD("%1", "%0")
+- " and %2, %0\n"
+- GUSA_END("%1", "%0")
+- : "=&r"(dummy) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+- }
++ __asm__ __volatile__(
++ GUSA_START_ODD("%1", "%0")
++ " and %2, %0\n"
++ GUSA_END("%1", "%0")
++ : "=&r"(dummy) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+ }
+
+ void __sh_or(volatile int *x, int v)
+ {
++ if (__hwcap & CPU_HAS_LLSC) return __sh_or_llsc(x, v);
++
+ int dummy;
+- if (__hwcap & CPU_HAS_LLSC) {
+- __asm__ __volatile__(
+- LLSC_START("%0")
+- " or %1, r0\n"
+- LLSC_END("%0")
+- : : "r"(x), "r"(v) : LLSC_CLOBBERS);
+- } else {
+- __asm__ __volatile__(
+- GUSA_START_ODD("%1", "%0")
+- " or %2, %0\n"
+- GUSA_END("%1", "%0")
+- : "=&r"(dummy) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+- }
++ __asm__ __volatile__(
++ GUSA_START_ODD("%1", "%0")
++ " or %2, %0\n"
++ GUSA_END("%1", "%0")
++ : "=&r"(dummy) : "r"(x), "r"(v) : GUSA_CLOBBERS);
+ }
++
++#endif
+--- a/arch/x32/atomic.h
++++ b/arch/x32/atomic.h
+@@ -47,16 +47,16 @@ static inline int a_cas(volatile int *p,
+ return t;
+ }
+
+-static inline void a_or(volatile void *p, int v)
++static inline void a_or(volatile int *p, int v)
+ {
+ __asm__( "lock ; or %1, %0"
+- : "=m"(*(int *)p) : "r"(v) : "memory" );
++ : "=m"(*p) : "r"(v) : "memory" );
+ }
+
+-static inline void a_and(volatile void *p, int v)
++static inline void a_and(volatile int *p, int v)
+ {
+ __asm__( "lock ; and %1, %0"
+- : "=m"(*(int *)p) : "r"(v) : "memory" );
++ : "=m"(*p) : "r"(v) : "memory" );
+ }
+
+ static inline int a_swap(volatile int *x, int v)
+--- a/arch/x86_64/atomic.h
++++ b/arch/x86_64/atomic.h
+@@ -47,16 +47,16 @@ static inline int a_cas(volatile int *p,
+ return t;
+ }
+
+-static inline void a_or(volatile void *p, int v)
++static inline void a_or(volatile int *p, int v)
+ {
+ __asm__( "lock ; or %1, %0"
+- : "=m"(*(int *)p) : "r"(v) : "memory" );
++ : "=m"(*p) : "r"(v) : "memory" );
+ }
+
+-static inline void a_and(volatile void *p, int v)
++static inline void a_and(volatile int *p, int v)
+ {
+ __asm__( "lock ; and %1, %0"
+- : "=m"(*(int *)p) : "r"(v) : "memory" );
++ : "=m"(*p) : "r"(v) : "memory" );
+ }
+
+ static inline int a_swap(volatile int *x, int v)
+--- a/configure
++++ b/configure
+@@ -80,7 +80,7 @@ fi
+ tryflag () {
+ printf "checking whether compiler accepts %s... " "$2"
+ echo "typedef int x;" > "$tmpc"
+-if $CC $2 -c -o /dev/null "$tmpc" >/dev/null 2>&1 ; then
++if $CC $CFLAGS_TRY $2 -c -o /dev/null "$tmpc" >/dev/null 2>&1 ; then
+ printf "yes\n"
+ eval "$1=\"\${$1} \$2\""
+ eval "$1=\${$1# }"
+@@ -94,7 +94,7 @@ fi
+ tryldflag () {
+ printf "checking whether linker accepts %s... " "$2"
+ echo "typedef int x;" > "$tmpc"
+-if $CC -nostdlib -shared "$2" -o /dev/null "$tmpc" >/dev/null 2>&1 ; then
++if $CC $LDFLAGS_TRY -nostdlib -shared "$2" -o /dev/null "$tmpc" >/dev/null 2>&1 ; then
+ printf "yes\n"
+ eval "$1=\"\${$1} \$2\""
+ eval "$1=\${$1# }"
+@@ -113,7 +113,9 @@ CFLAGS_C99FSE=
+ CFLAGS_AUTO=
+ CFLAGS_MEMOPS=
+ CFLAGS_NOSSP=
++CFLAGS_TRY=
+ LDFLAGS_AUTO=
++LDFLAGS_TRY=
+ OPTIMIZE_GLOBS=
+ prefix=/usr/local/musl
+ exec_prefix='$(prefix)'
+@@ -205,6 +207,14 @@ exit 1
+ fi
+
+ #
++# Figure out options to force errors on unknown flags.
++#
++tryflag CFLAGS_TRY -Werror=unknown-warning-option
++tryflag CFLAGS_TRY -Werror=unused-command-line-argument
++tryldflag LDFLAGS_TRY -Werror=unknown-warning-option
++tryldflag LDFLAGS_TRY -Werror=unused-command-line-argument
++
++#
+ # Need to know if the compiler is gcc to decide whether to build the
+ # musl-gcc wrapper, and for critical bug detection in some gcc versions.
+ #
+--- a/crt/mips/crt1.s
++++ b/crt/mips/crt1.s
+@@ -4,6 +4,8 @@
+ .weak _fini
+ .global __start
+ .global _start
++.type __start,@function
++.type _start,@function
+ __start:
+ _start:
+ subu $fp, $fp, $fp # Zero the frame pointer.
+--- a/crt/mips/crti.s
++++ b/crt/mips/crti.s
+@@ -2,6 +2,7 @@
+
+ .section .init
+ .global _init
++.type _init,@function
+ .align 2
+ _init:
+ subu $sp,$sp,32
+@@ -10,6 +11,7 @@ _init:
+
+ .section .fini
+ .global _fini
++.type _fini,@function
+ .align 2
+ _fini:
+ subu $sp,$sp,32
+--- /dev/null
++++ b/crt/rcrt1.c
+@@ -0,0 +1,15 @@
++#define SHARED
++#define START "_start"
++#define _dlstart_c _start_c
++#include "../src/ldso/dlstart.c"
++
++int main();
++void _init() __attribute__((weak));
++void _fini() __attribute__((weak));
++_Noreturn int __libc_start_main(int (*)(), int, char **,
++ void (*)(), void(*)(), void(*)());
++
++_Noreturn void __dls2(unsigned char *base, size_t *sp)
++{
++ __libc_start_main(main, *sp, (void *)(sp+1), _init, _fini, 0);
++}
+--- a/include/sys/resource.h
++++ b/include/sys/resource.h
+@@ -96,6 +96,9 @@ int prlimit(pid_t, int, const struct rli
+ #define RLIM_NLIMITS RLIMIT_NLIMITS
+
+ #if defined(_LARGEFILE64_SOURCE) || defined(_GNU_SOURCE)
++#define RLIM64_INFINITY RLIM_INFINITY
++#define RLIM64_SAVED_CUR RLIM_SAVED_CUR
++#define RLIM64_SAVED_MAX RLIM_SAVED_MAX
+ #define getrlimit64 getrlimit
+ #define setrlimit64 setrlimit
+ #define rlimit64 rlimit
+--- a/src/internal/dynlink.h
++++ b/src/internal/dynlink.h
+@@ -51,7 +51,7 @@ enum {
+ #define AUX_CNT 32
+ #define DYN_CNT 32
+
+-typedef void (*stage2_func)(unsigned char *);
++typedef void (*stage2_func)(unsigned char *, size_t *);
+ typedef _Noreturn void (*stage3_func)(size_t *);
+
+ #endif
+--- a/src/internal/libc.h
++++ b/src/internal/libc.h
+@@ -8,9 +8,7 @@
+ struct __locale_map;
+
+ struct __locale_struct {
+- volatile int ctype_utf8;
+- char *messages_name;
+- struct __locale_map *volatile cat[4];
++ const struct __locale_map *volatile cat[6];
+ };
+
+ struct __libc {
+@@ -23,8 +21,6 @@ struct __libc {
+ volatile int ofl_lock[2];
+ size_t tls_size;
+ size_t page_size;
+- volatile int uselocale_cnt;
+- volatile int bytelocale_cnt_minus_1;
+ struct __locale_struct global_locale;
+ };
+
+--- a/src/internal/locale_impl.h
++++ b/src/internal/locale_impl.h
+@@ -9,22 +9,20 @@ struct __locale_map {
+ const void *map;
+ size_t map_size;
+ char name[LOCALE_NAME_MAX+1];
+- struct __locale_map *next;
++ const struct __locale_map *next;
+ };
+
+-int __setlocalecat(locale_t, int, const char *);
++const struct __locale_map *__get_locale(int, const char *);
+ const char *__mo_lookup(const void *, size_t, const char *);
+ const char *__lctrans(const char *, const struct __locale_map *);
+ const char *__lctrans_cur(const char *);
+
+-#define LCTRANS(msg, lc, loc) __lctrans(msg, (loc)->cat[(lc)-2])
++#define LCTRANS(msg, lc, loc) __lctrans(msg, (loc)->cat[(lc)])
+ #define LCTRANS_CUR(msg) __lctrans_cur(msg)
+
+-#define CURRENT_LOCALE \
+- (libc.uselocale_cnt ? __pthread_self()->locale : &libc.global_locale)
++#define CURRENT_LOCALE (__pthread_self()->locale)
+
+-#define CURRENT_UTF8 \
+- (libc.bytelocale_cnt_minus_1<0 || __pthread_self()->locale->ctype_utf8)
++#define CURRENT_UTF8 (!!__pthread_self()->locale->cat[LC_CTYPE])
+
+ #undef MB_CUR_MAX
+ #define MB_CUR_MAX (CURRENT_UTF8 ? 4 : 1)
+--- a/src/ldso/dlstart.c
++++ b/src/ldso/dlstart.c
+@@ -56,31 +56,22 @@ void _dlstart_c(size_t *sp, size_t *dynv
+ for (i=0; i<local_cnt; i++) got[i] += (size_t)base;
+ }
+
+- /* The use of the reloc_info structure and nested loops is a trick
+- * to work around the fact that we can't necessarily make function
+- * calls yet. Each struct in the array serves like the arguments
+- * to a function call. */
+- struct {
+- void *rel;
+- size_t size;
+- size_t stride;
+- } reloc_info[] = {
+- { base+dyn[DT_JMPREL], dyn[DT_PLTRELSZ], 2+(dyn[DT_PLTREL]==DT_RELA) },
+- { base+dyn[DT_REL], dyn[DT_RELSZ], 2 },
+- { base+dyn[DT_RELA], dyn[DT_RELASZ], 3 },
+- { 0, 0, 0 }
+- };
+-
+- for (i=0; reloc_info[i].stride; i++) {
+- size_t *rel = reloc_info[i].rel;
+- size_t rel_size = reloc_info[i].size;
+- size_t stride = reloc_info[i].stride;
+- for (; rel_size; rel+=stride, rel_size-=stride*sizeof(size_t)) {
+- if (!IS_RELATIVE(rel[1])) continue;
+- size_t *rel_addr = (void *)(base + rel[0]);
+- size_t addend = stride==3 ? rel[2] : *rel_addr;
+- *rel_addr = (size_t)base + addend;
+- }
++ size_t *rel, rel_size;
++
++ rel = (void *)(base+dyn[DT_REL]);
++ rel_size = dyn[DT_RELSZ];
++ for (; rel_size; rel+=2, rel_size-=2*sizeof(size_t)) {
++ if (!IS_RELATIVE(rel[1])) continue;
++ size_t *rel_addr = (void *)(base + rel[0]);
++ *rel_addr += (size_t)base;
++ }
++
++ rel = (void *)(base+dyn[DT_RELA]);
++ rel_size = dyn[DT_RELASZ];
++ for (; rel_size; rel+=3, rel_size-=3*sizeof(size_t)) {
++ if (!IS_RELATIVE(rel[1])) continue;
++ size_t *rel_addr = (void *)(base + rel[0]);
++ *rel_addr = (size_t)base + rel[2];
+ }
+
+ const char *strings = (void *)(base + dyn[DT_STRTAB]);
+@@ -93,16 +84,7 @@ void _dlstart_c(size_t *sp, size_t *dynv
+ && s[3]=='l' && s[4]=='s' && s[5]=='2' && !s[6])
+ break;
+ }
+- ((stage2_func)(base + syms[i].st_value))(base);
+-
+- /* Call dynamic linker stage-3, __dls3 */
+- for (i=0; ;i++) {
+- const char *s = strings + syms[i].st_name;
+- if (s[0]=='_' && s[1]=='_' && s[2]=='d'
+- && s[3]=='l' && s[4]=='s' && s[5]=='3' && !s[6])
+- break;
+- }
+- ((stage3_func)(base + syms[i].st_value))(sp);
++ ((stage2_func)(base + syms[i].st_value))(base, sp);
+ }
+
+ #endif
+--- a/src/ldso/dynlink.c
++++ b/src/ldso/dynlink.c
+@@ -74,7 +74,6 @@ struct dso {
+ volatile int new_dtv_idx, new_tls_idx;
+ struct td_index *td_index;
+ struct dso *fini_next;
+- int rel_early_relative, rel_update_got;
+ char *shortname;
+ char buf[];
+ };
+@@ -96,6 +95,9 @@ static struct builtin_tls {
+ } builtin_tls[1];
+ #define MIN_TLS_ALIGN offsetof(struct builtin_tls, pt)
+
++#define ADDEND_LIMIT 4096
++static size_t *saved_addends, *apply_addends_to;
++
+ static struct dso ldso;
+ static struct dso *head, *tail, *fini_head;
+ static char *env_path, *sys_path;
+@@ -256,10 +258,19 @@ static void do_relocs(struct dso *dso, s
+ size_t sym_val;
+ size_t tls_val;
+ size_t addend;
++ int skip_relative = 0, reuse_addends = 0, save_slot = 0;
++
++ if (dso == &ldso) {
++ /* Only ldso's REL table needs addend saving/reuse. */
++ if (rel == apply_addends_to)
++ reuse_addends = 1;
++ skip_relative = 1;
++ }
+
+ for (; rel_size; rel+=stride, rel_size-=stride*sizeof(size_t)) {
+- if (dso->rel_early_relative && IS_RELATIVE(rel[1])) continue;
++ if (skip_relative && IS_RELATIVE(rel[1])) continue;
+ type = R_TYPE(rel[1]);
++ if (type == REL_NONE) continue;
+ sym_index = R_SYM(rel[1]);
+ reloc_addr = (void *)(base + rel[0]);
+ if (sym_index) {
+@@ -280,12 +291,20 @@ static void do_relocs(struct dso *dso, s
+ def.dso = dso;
+ }
+
+- int gotplt = (type == REL_GOT || type == REL_PLT);
+- if (dso->rel_update_got && !gotplt) continue;
+-
+- addend = stride>2 ? rel[2]
+- : gotplt || type==REL_COPY ? 0
+- : *reloc_addr;
++ if (stride > 2) {
++ addend = rel[2];
++ } else if (type==REL_GOT || type==REL_PLT|| type==REL_COPY) {
++ addend = 0;
++ } else if (reuse_addends) {
++ /* Save original addend in stage 2 where the dso
++ * chain consists of just ldso; otherwise read back
++ * saved addend since the inline one was clobbered. */
++ if (head==&ldso)
++ saved_addends[save_slot] = *reloc_addr;
++ addend = saved_addends[save_slot++];
++ } else {
++ addend = *reloc_addr;
++ }
+
+ sym_val = def.sym ? (size_t)def.dso->base+def.sym->st_value : 0;
+ tls_val = def.sym ? def.sym->st_value : 0;
+@@ -879,7 +898,7 @@ static void do_mips_relocs(struct dso *p
+ size_t i, j, rel[2];
+ unsigned char *base = p->base;
+ i=0; search_vec(p->dynv, &i, DT_MIPS_LOCAL_GOTNO);
+- if (p->rel_early_relative) {
++ if (p==&ldso) {
+ got += i;
+ } else {
+ while (i--) *got++ += (size_t)base;
+@@ -1116,7 +1135,7 @@ static void update_tls_size()
+ * linker itself, but some of the relocations performed may need to be
+ * replaced later due to copy relocations in the main program. */
+
+-void __dls2(unsigned char *base)
++void __dls2(unsigned char *base, size_t *sp)
+ {
+ Ehdr *ehdr = (void *)base;
+ ldso.base = base;
+@@ -1125,15 +1144,35 @@ void __dls2(unsigned char *base)
+ ldso.phnum = ehdr->e_phnum;
+ ldso.phdr = (void *)(base + ehdr->e_phoff);
+ ldso.phentsize = ehdr->e_phentsize;
+- ldso.rel_early_relative = 1;
+ kernel_mapped_dso(&ldso);
+ decode_dyn(&ldso);
+
++ /* Prepare storage for to save clobbered REL addends so they
++ * can be reused in stage 3. There should be very few. If
++ * something goes wrong and there are a huge number, abort
++ * instead of risking stack overflow. */
++ size_t dyn[DYN_CNT];
++ decode_vec(ldso.dynv, dyn, DYN_CNT);
++ size_t *rel = (void *)(base+dyn[DT_REL]);
++ size_t rel_size = dyn[DT_RELSZ];
++ size_t symbolic_rel_cnt = 0;
++ apply_addends_to = rel;
++ for (; rel_size; rel+=2, rel_size-=2*sizeof(size_t))
++ if (!IS_RELATIVE(rel[1])) symbolic_rel_cnt++;
++ if (symbolic_rel_cnt >= ADDEND_LIMIT) a_crash();
++ size_t addends[symbolic_rel_cnt+1];
++ saved_addends = addends;
++
+ head = &ldso;
+ reloc_all(&ldso);
+
+ ldso.relocated = 0;
+- ldso.rel_update_got = 1;
++
++ /* Call dynamic linker stage-3, __dls3, looking it up
++ * symbolically as a barrier against moving the address
++ * load across the above relocation processing. */
++ struct symdef dls3_def = find_sym(&ldso, "__dls3", 0);
++ ((stage3_func)(ldso.base+dls3_def.sym->st_value))(sp);
+ }
+
+ /* Stage 3 of the dynamic linker is called with the dynamic linker/libc
+--- a/src/locale/__lctrans.c
++++ b/src/locale/__lctrans.c
+@@ -16,5 +16,5 @@ const char *__lctrans(const char *msg, c
+
+ const char *__lctrans_cur(const char *msg)
+ {
+- return __lctrans_impl(msg, CURRENT_LOCALE->cat[LC_MESSAGES-2]);
++ return __lctrans_impl(msg, CURRENT_LOCALE->cat[LC_MESSAGES]);
+ }
+--- a/src/locale/__setlocalecat.c
++++ /dev/null
+@@ -1,111 +0,0 @@
+-#include <locale.h>
+-#include <string.h>
+-#include "locale_impl.h"
+-#include "libc.h"
+-#include "atomic.h"
+-
+-const char *__lctrans_impl(const char *msg, const struct __locale_map *lm)
+-{
+- const char *trans = 0;
+- if (lm) trans = __mo_lookup(lm->map, lm->map_size, msg);
+- return trans ? trans : msg;
+-}
+-
+-const unsigned char *__map_file(const char *, size_t *);
+-int __munmap(void *, size_t);
+-char *__strchrnul(const char *, int);
+-
+-static struct __locale_map *findlocale(const char *name, size_t n)
+-{
+- static void *volatile loc_head;
+- struct __locale_map *p, *new, *old_head;
+- const char *path = 0, *z;
+- char buf[256];
+- size_t l;
+- const void *map;
+- size_t map_size;
+-
+- for (p=loc_head; p; p=p->next)
+- if (!strcmp(name, p->name)) return p;
+-
+- if (!libc.secure) path = getenv("MUSL_LOCPATH");
+- /* FIXME: add a default path? */
+- if (!path) return 0;
+-
+- for (; *path; path=z+!!*z) {
+- z = __strchrnul(path, ':');
+- l = z - path - !!*z;
+- if (l >= sizeof buf - n - 2) continue;
+- memcpy(buf, path, l);
+- buf[l] = '/';
+- memcpy(buf+l+1, name, n);
+- buf[l+1+n] = 0;
+- map = __map_file(buf, &map_size);
+- if (map) {
+- new = malloc(sizeof *new);
+- if (!new) {
+- __munmap((void *)map, map_size);
+- return 0;
+- }
+- new->map = map;
+- new->map_size = map_size;
+- memcpy(new->name, name, n);
+- new->name[n] = 0;
+- do {
+- old_head = loc_head;
+- new->next = old_head;
+- } while (a_cas_p(&loc_head, old_head, new) != old_head);
+- return new;
+- }
+- }
+- return 0;
+-}
+-
+-static const char envvars[][12] = {
+- "LC_CTYPE",
+- "LC_NUMERIC",
+- "LC_TIME",
+- "LC_COLLATE",
+- "LC_MONETARY",
+- "LC_MESSAGES",
+-};
+-
+-int __setlocalecat(locale_t loc, int cat, const char *val)
+-{
+- if (!*val) {
+- (val = getenv("LC_ALL")) && *val ||
+- (val = getenv(envvars[cat])) && *val ||
+- (val = getenv("LANG")) && *val ||
+- (val = "C.UTF-8");
+- }
+-
+- size_t n;
+- for (n=0; n<LOCALE_NAME_MAX && val[n] && val[n]!='/'; n++);
+- if (val[0]=='.' || val[n]) val = "C.UTF-8";
+- int builtin = (val[0]=='C' && !val[1])
+- || !strcmp(val, "C.UTF-8")
+- || !strcmp(val, "POSIX");
+- struct __locale_map *data, *old;
+-
+- switch (cat) {
+- case LC_CTYPE:
+- a_store(&loc->ctype_utf8, !builtin || val[1]=='.');
+- break;
+- case LC_MESSAGES:
+- if (builtin) {
+- loc->messages_name[0] = 0;
+- } else {
+- memcpy(loc->messages_name, val, n);
+- loc->messages_name[n] = 0;
+- }
+- /* fall through */
+- default:
+- data = builtin ? 0 : findlocale(val, n);
+- if (data == loc->cat[cat-2]) break;
+- do old = loc->cat[cat-2];
+- while (a_cas_p(&loc->cat[cat-2], old, data) != old);
+- case LC_NUMERIC:
+- break;
+- }
+- return 0;
+-}
+--- a/src/locale/dcngettext.c
++++ b/src/locale/dcngettext.c
+@@ -84,13 +84,15 @@ char *bindtextdomain(const char *domainn
+ }
+
+ static const char catnames[][12] = {
++ "LC_CTYPE",
++ "LC_NUMERIC",
+ "LC_TIME",
+ "LC_COLLATE",
+ "LC_MONETARY",
+ "LC_MESSAGES",
+ };
+
+-static const char catlens[] = { 7, 10, 11, 11 };
++static const char catlens[] = { 8, 10, 7, 10, 11, 11 };
+
+ struct msgcat {
+ struct msgcat *next;
+@@ -117,10 +119,12 @@ char *dcngettext(const char *domainname,
+ static struct msgcat *volatile cats;
+ struct msgcat *p;
+ struct __locale_struct *loc = CURRENT_LOCALE;
+- struct __locale_map *lm;
++ const struct __locale_map *lm;
+ const char *dirname, *locname, *catname;
+ size_t dirlen, loclen, catlen, domlen;
+
++ if ((unsigned)category >= LC_ALL) goto notrans;
++
+ if (!domainname) domainname = __gettextdomain();
+
+ domlen = strlen(domainname);
+@@ -129,25 +133,15 @@ char *dcngettext(const char *domainname,
+ dirname = gettextdir(domainname, &dirlen);
+ if (!dirname) goto notrans;
+
+- switch (category) {
+- case LC_MESSAGES:
+- locname = loc->messages_name;
+- if (!*locname) goto notrans;
+- break;
+- case LC_TIME:
+- case LC_MONETARY:
+- case LC_COLLATE:
+- lm = loc->cat[category-2];
+- if (!lm) goto notrans;
+- locname = lm->name;
+- break;
+- default:
++ lm = loc->cat[category];
++ if (!lm) {
+ notrans:
+ return (char *) ((n == 1) ? msgid1 : msgid2);
+ }
++ locname = lm->name;
+
+- catname = catnames[category-2];
+- catlen = catlens[category-2];
++ catname = catnames[category];
++ catlen = catlens[category];
+ loclen = strlen(locname);
+
+ size_t namelen = dirlen+1 + loclen+1 + catlen+1 + domlen+3;
+--- a/src/locale/duplocale.c
++++ b/src/locale/duplocale.c
+@@ -5,17 +5,10 @@
+
+ locale_t __duplocale(locale_t old)
+ {
+- locale_t new = calloc(1, sizeof *new + LOCALE_NAME_MAX + 1);
++ locale_t new = malloc(sizeof *new);
+ if (!new) return 0;
+- new->messages_name = (void *)(new+1);
+-
+ if (old == LC_GLOBAL_LOCALE) old = &libc.global_locale;
+- new->ctype_utf8 = old->ctype_utf8;
+- if (old->messages_name)
+- strcpy(new->messages_name, old->messages_name);
+-
+- for (size_t i=0; i<sizeof new->cat/sizeof new->cat[0]; i++)
+- new->cat[i] = old->cat[i];
++ *new = *old;
+ return new;
+ }
+
+--- a/src/locale/freelocale.c
++++ b/src/locale/freelocale.c
+@@ -2,9 +2,11 @@
+ #include "locale_impl.h"
+ #include "libc.h"
+
++int __loc_is_allocated(locale_t);
++
+ void freelocale(locale_t l)
+ {
+- free(l);
++ if (__loc_is_allocated(l)) free(l);
+ }
+
+ weak_alias(freelocale, __freelocale);
+--- a/src/locale/iconv.c
++++ b/src/locale/iconv.c
+@@ -23,19 +23,13 @@
+ #define BIG5 0340
+ #define EUC_KR 0350
+
+-/* FIXME: these are not implemented yet
+- * EUC: A1-FE A1-FE
+- * GBK: 81-FE 40-7E,80-FE
+- * Big5: A1-FE 40-7E,A1-FE
+- */
+-
+ /* Definitions of charmaps. Each charmap consists of:
+ * 1. Empty-string-terminated list of null-terminated aliases.
+ * 2. Special type code or number of elided entries.
+ * 3. Character table (size determined by field 2). */
+
+ static const unsigned char charmaps[] =
+-"utf8\0\0\310"
++"utf8\0char\0\0\310"
+ "wchart\0\0\306"
+ "ucs2\0ucs2be\0\0\304"
+ "ucs2le\0\0\305"
+@@ -90,6 +84,7 @@ static int fuzzycmp(const unsigned char
+ static size_t find_charmap(const void *name)
+ {
+ const unsigned char *s;
++ if (!*(char *)name) name=charmaps; /* "utf8" */
+ for (s=charmaps; *s; ) {
+ if (!fuzzycmp(name, s)) {
+ for (; *s; s+=strlen((void *)s)+1);
+--- /dev/null
++++ b/src/locale/locale_map.c
+@@ -0,0 +1,124 @@
++#include <locale.h>
++#include <string.h>
++#include "locale_impl.h"
++#include "libc.h"
++#include "atomic.h"
++
++const char *__lctrans_impl(const char *msg, const struct __locale_map *lm)
++{
++ const char *trans = 0;
++ if (lm) trans = __mo_lookup(lm->map, lm->map_size, msg);
++ return trans ? trans : msg;
++}
++
++const unsigned char *__map_file(const char *, size_t *);
++int __munmap(void *, size_t);
++char *__strchrnul(const char *, int);
++
++static const char envvars[][12] = {
++ "LC_CTYPE",
++ "LC_NUMERIC",
++ "LC_TIME",
++ "LC_COLLATE",
++ "LC_MONETARY",
++ "LC_MESSAGES",
++};
++
++static const uint32_t empty_mo[] = { 0x950412de, 0, -1, -1, -1 };
++
++const struct __locale_map __c_dot_utf8 = {
++ .map = empty_mo,
++ .map_size = sizeof empty_mo,
++ .name = "C.UTF-8"
++};
++
++const struct __locale_map *__get_locale(int cat, const char *val)
++{
++ static int lock[2];
++ static void *volatile loc_head;
++ const struct __locale_map *p;
++ struct __locale_map *new = 0;
++ const char *path = 0, *z;
++ char buf[256];
++ size_t l, n;
++
++ if (!*val) {
++ (val = getenv("LC_ALL")) && *val ||
++ (val = getenv(envvars[cat])) && *val ||
++ (val = getenv("LANG")) && *val ||
++ (val = "C.UTF-8");
++ }
++
++ /* Limit name length and forbid leading dot or any slashes. */
++ for (n=0; n<LOCALE_NAME_MAX && val[n] && val[n]!='/'; n++);
++ if (val[0]=='.' || val[n]) val = "C.UTF-8";
++ int builtin = (val[0]=='C' && !val[1])
++ || !strcmp(val, "C.UTF-8")
++ || !strcmp(val, "POSIX");
++
++ if (builtin) {
++ if (cat == LC_CTYPE && val[1]=='.')
++ return (void *)&__c_dot_utf8;
++ return 0;
++ }
++
++ for (p=loc_head; p; p=p->next)
++ if (!strcmp(val, p->name)) return p;
++
++ LOCK(lock);
++
++ for (p=loc_head; p; p=p->next)
++ if (!strcmp(val, p->name)) {
++ UNLOCK(lock);
++ return p;
++ }
++
++ if (!libc.secure) path = getenv("MUSL_LOCPATH");
++ /* FIXME: add a default path? */
++
++ if (path) for (; *path; path=z+!!*z) {
++ z = __strchrnul(path, ':');
++ l = z - path - !!*z;
++ if (l >= sizeof buf - n - 2) continue;
++ memcpy(buf, path, l);
++ buf[l] = '/';
++ memcpy(buf+l+1, val, n);
++ buf[l+1+n] = 0;
++ size_t map_size;
++ const void *map = __map_file(buf, &map_size);
++ if (map) {
++ new = malloc(sizeof *new);
++ if (!new) {
++ __munmap((void *)map, map_size);
++ break;
++ }
++ new->map = map;
++ new->map_size = map_size;
++ memcpy(new->name, val, n);
++ new->name[n] = 0;
++ new->next = loc_head;
++ loc_head = new;
++ break;
++ }
++ }
++
++ /* If no locale definition was found, make a locale map
++ * object anyway to store the name, which is kept for the
++ * sake of being able to do message translations at the
++ * application level. */
++ if (!new && (new = malloc(sizeof *new))) {
++ new->map = empty_mo;
++ new->map_size = sizeof empty_mo;
++ memcpy(new->name, val, n);
++ new->name[n] = 0;
++ new->next = loc_head;
++ loc_head = new;
++ }
++
++ /* For LC_CTYPE, never return a null pointer unless the
++ * requested name was "C" or "POSIX". */
++ if (!new && cat == LC_CTYPE) new = (void *)&__c_dot_utf8;
++
++ UNLOCK(lock);
++ return new;
++}
+--- a/src/locale/newlocale.c
++++ b/src/locale/newlocale.c
+@@ -3,22 +3,52 @@
+ #include "locale_impl.h"
+ #include "libc.h"
+
++extern const struct __locale_map __c_dot_utf8;
++
++static const struct __locale_struct c_locale = { 0 };
++static const struct __locale_struct c_dot_utf8_locale = {
++ .cat[LC_CTYPE] = &__c_dot_utf8
++};
++
++int __loc_is_allocated(locale_t loc)
++{
++ return loc && loc != &c_locale && loc != &c_dot_utf8_locale;
++}
++
+ locale_t __newlocale(int mask, const char *name, locale_t loc)
+ {
+- int i;
++ int i, j;
++ struct __locale_struct tmp;
++ const struct __locale_map *lm;
+
+- if (!loc) {
+- loc = calloc(1, sizeof *loc + LOCALE_NAME_MAX + 1);
+- if (!loc) return 0;
+- loc->messages_name = (void *)(loc+1);
++ /* For locales with allocated storage, modify in-place. */
++ if (__loc_is_allocated(loc)) {
+ for (i=0; i<LC_ALL; i++)
+- if (!(mask & (1<<i)))
+- __setlocalecat(loc, i, "");
++ if (mask & (1<<i))
++ loc->cat[i] = __get_locale(i, name);
++ return loc;
++ }
++
++ /* Otherwise, build a temporary locale object, which will only
++ * be instantiated in allocated storage if it does not match
++ * one of the built-in static locales. This makes the common
++ * usage case for newlocale, getting a C locale with predictable
++ * behavior, very fast, and more importantly, fail-safe. */
++ for (j=i=0; i<LC_ALL; i++) {
++ if (loc && !(mask & (1<<i)))
++ lm = loc->cat[i];
++ else
++ lm = __get_locale(i, mask & (1<<i) ? name : "");
++ if (lm) j++;
++ tmp.cat[i] = lm;
+ }
+
+- for (i=0; i<LC_ALL; i++)
+- if (mask & (1<<i))
+- __setlocalecat(loc, i, name);
++ if (!j)
++ return (locale_t)&c_locale;
++ if (j==1 && tmp.cat[LC_CTYPE]==c_dot_utf8_locale.cat[LC_CTYPE])
++ return (locale_t)&c_dot_utf8_locale;
++
++ if ((loc = malloc(sizeof *loc))) *loc = tmp;
+
+ return loc;
+ }
+--- a/src/locale/setlocale.c
++++ b/src/locale/setlocale.c
+@@ -5,73 +5,66 @@
+ #include "libc.h"
+ #include "atomic.h"
+
+-static char buf[2+4*(LOCALE_NAME_MAX+1)];
++static char buf[LC_ALL*(LOCALE_NAME_MAX+1)];
+
+-char *setlocale(int cat, const char *name)
++static char *setlocale_one_unlocked(int cat, const char *name)
+ {
+- struct __locale_map *lm;
+- int i, j;
++ const struct __locale_map *lm;
+
+- if (!libc.global_locale.messages_name) {
+- libc.global_locale.messages_name =
+- buf + 2 + 3*(LOCALE_NAME_MAX+1);
+- }
++ if (name) libc.global_locale.cat[cat] = lm = __get_locale(cat, name);
++ else lm = libc.global_locale.cat[cat];
++
++ return lm ? (char *)lm->name : "C";
++}
++
++char *__strchrnul(const char *, int);
++
++char *setlocale(int cat, const char *name)
++{
++ static volatile int lock[2];
+
+ if ((unsigned)cat > LC_ALL) return 0;
+
++ LOCK(lock);
++
+ /* For LC_ALL, setlocale is required to return a string which
+ * encodes the current setting for all categories. The format of
+ * this string is unspecified, and only the following code, which
+ * performs both the serialization and deserialization, depends
+ * on the format, so it can easily be changed if needed. */
+ if (cat == LC_ALL) {
++ int i;
+ if (name) {
+- char part[LOCALE_NAME_MAX+1];
+- if (name[0] && name[1]==';'
+- && strlen(name) > 2 + 3*(LOCALE_NAME_MAX+1)) {
+- part[0] = name[0];
+- part[1] = 0;
+- setlocale(LC_CTYPE, part);
+- part[LOCALE_NAME_MAX] = 0;
+- for (i=LC_TIME; i<LC_MESSAGES; i++) {
+- memcpy(part, name + 2 + (i-2)*(LOCALE_NAME_MAX+1), LOCALE_NAME_MAX);
+- for (j=LOCALE_NAME_MAX-1; j && part[j]==';'; j--)
+- part[j] = 0;
+- setlocale(i, part);
++ char part[LOCALE_NAME_MAX+1] = "C.UTF-8";
++ const char *p = name;
++ for (i=0; i<LC_ALL; i++) {
++ const char *z = __strchrnul(p, ';');
++ if (z-p <= LOCALE_NAME_MAX) {
++ memcpy(part, p, z-p);
++ part[z-p] = 0;
++ if (*z) p = z+1;
+ }
+- setlocale(LC_MESSAGES, name + 2 + 3*(LOCALE_NAME_MAX+1));
+- } else {
+- for (i=0; i<LC_ALL; i++)
+- setlocale(i, name);
++ setlocale_one_unlocked(i, part);
+ }
+ }
+- memset(buf, ';', 2 + 3*(LOCALE_NAME_MAX+1));
+- buf[0] = libc.global_locale.ctype_utf8 ? 'U' : 'C';
+- for (i=LC_TIME; i<LC_MESSAGES; i++) {
+- lm = libc.global_locale.cat[i-2];
+- if (lm) memcpy(buf + 2 + (i-2)*(LOCALE_NAME_MAX+1),
+- lm->name, strlen(lm->name));
++ char *s = buf;
++ for (i=0; i<LC_ALL; i++) {
++ const struct __locale_map *lm =
++ libc.global_locale.cat[i];
++ const char *part = lm ? lm->name : "C";
++ size_t l = strlen(part);
++ memcpy(s, part, l);
++ s[l] = ';';
++ s += l+1;
+ }
++ *--s = 0;
++ UNLOCK(lock);
+ return buf;
+ }
+
+- if (name) {
+- int adj = libc.global_locale.ctype_utf8;
+- __setlocalecat(&libc.global_locale, cat, name);
+- adj -= libc.global_locale.ctype_utf8;
+- if (adj) a_fetch_add(&libc.bytelocale_cnt_minus_1, adj);
+- }
++ char *ret = setlocale_one_unlocked(cat, name);
+
+- switch (cat) {
+- case LC_CTYPE:
+- return libc.global_locale.ctype_utf8 ? "C.UTF-8" : "C";
+- case LC_NUMERIC:
+- return "C";
+- case LC_MESSAGES:
+- return libc.global_locale.messages_name[0]
+- ? libc.global_locale.messages_name : "C";
+- default:
+- lm = libc.global_locale.cat[cat-2];
+- return lm ? lm->name : "C";
+- }
++ UNLOCK(lock);
++
++ return ret;
+ }
+--- a/src/locale/uselocale.c
++++ b/src/locale/uselocale.c
+@@ -10,15 +10,7 @@ locale_t __uselocale(locale_t new)
+
+ if (new == LC_GLOBAL_LOCALE) new = global;
+
+- if (new && new != old) {
+- int adj = 0;
+- if (new == global) a_dec(&libc.uselocale_cnt);
+- else if (!new->ctype_utf8) adj++;
+- if (old == global) a_inc(&libc.uselocale_cnt);
+- else if (!old->ctype_utf8) adj--;
+- a_fetch_add(&libc.bytelocale_cnt_minus_1, adj);
+- self->locale = new;
+- }
++ self->locale = new;
+
+ return old == global ? LC_GLOBAL_LOCALE : old;
+ }
+--- a/src/stdio/__stdio_read.c
++++ b/src/stdio/__stdio_read.c
+@@ -21,7 +21,6 @@ size_t __stdio_read(FILE *f, unsigned ch
+ pthread_cleanup_pop(0);
+ if (cnt <= 0) {
+ f->flags |= F_EOF ^ ((F_ERR^F_EOF) & cnt);
+- f->rpos = f->rend = 0;
+ return cnt;
+ }
+ if (cnt <= iov[0].iov_len) return cnt;
+--- a/src/stdio/__toread.c
++++ b/src/stdio/__toread.c
+@@ -5,12 +5,12 @@ int __toread(FILE *f)
+ f->mode |= f->mode-1;
+ if (f->wpos > f->buf) f->write(f, 0, 0);
+ f->wpos = f->wbase = f->wend = 0;
+- if (f->flags & (F_EOF|F_NORD)) {
+- if (f->flags & F_NORD) f->flags |= F_ERR;
++ if (f->flags & F_NORD) {
++ f->flags |= F_ERR;
+ return EOF;
+ }
+- f->rpos = f->rend = f->buf;
+- return 0;
++ f->rpos = f->rend = f->buf + f->buf_size;
++ return (f->flags & F_EOF) ? EOF : 0;
+ }
+
+ void __stdio_exit_needed(void);
+--- a/src/stdio/__uflow.c
++++ b/src/stdio/__uflow.c
+@@ -1,11 +1,11 @@
+ #include "stdio_impl.h"
+
+-/* This function will never be called if there is already data
+- * buffered for reading. Thus we can get by with very few branches. */
++/* This function assumes it will never be called if there is already
++ * data buffered for reading. */
+
+ int __uflow(FILE *f)
+ {
+ unsigned char c;
+- if ((f->rend || !__toread(f)) && f->read(f, &c, 1)==1) return c;
++ if (!__toread(f) && f->read(f, &c, 1)==1) return c;
+ return EOF;
+ }
+--- a/src/stdio/ungetc.c
++++ b/src/stdio/ungetc.c
+@@ -6,7 +6,8 @@ int ungetc(int c, FILE *f)
+
+ FLOCK(f);
+
+- if ((!f->rend && __toread(f)) || f->rpos <= f->buf - UNGET) {
++ if (!f->rpos) __toread(f);
++ if (!f->rpos || f->rpos <= f->buf - UNGET) {
+ FUNLOCK(f);
+ return EOF;
+ }
+--- a/src/stdio/ungetwc.c
++++ b/src/stdio/ungetwc.c
+@@ -19,7 +19,8 @@ wint_t ungetwc(wint_t c, FILE *f)
+
+ f->mode |= f->mode+1;
+
+- if ((!f->rend && __toread(f)) || f->rpos < f->buf - UNGET + l) {
++ if (!f->rpos) __toread(f);
++ if (!f->rpos || f->rpos < f->buf - UNGET + l) {
+ FUNLOCK(f);
+ return EOF;
+ }
+--- a/src/thread/i386/__set_thread_area.s
++++ b/src/thread/i386/__set_thread_area.s
+@@ -6,10 +6,10 @@ __set_thread_area:
+ push $0x51
+ push $0xfffff
+ push 16(%esp)
+- xor %edx,%edx
+- mov %gs,%dx
+- sub $3,%edx
+- sar $3,%edx
++ call 1f
++1: addl $4f-1b,(%esp)
++ pop %ecx
++ mov (%ecx),%edx
+ push %edx
+ mov %esp,%ebx
+ xor %eax,%eax
+@@ -18,6 +18,7 @@ __set_thread_area:
+ testl %eax,%eax
+ jnz 2f
+ movl (%esp),%edx
++ movl %edx,(%ecx)
+ leal 3(,%edx,8),%edx
+ 3: movw %dx,%gs
+ 1:
+@@ -38,3 +39,7 @@ __set_thread_area:
+ mov $7,%dl
+ inc %al
+ jmp 3b
++
++.data
++ .align 4
++4: .long -1
+--- a/src/thread/mips/syscall_cp.s
++++ b/src/thread/mips/syscall_cp.s
+@@ -2,10 +2,13 @@
+
+ .global __cp_begin
+ .hidden __cp_begin
++.type __cp_begin,@function
+ .global __cp_end
+ .hidden __cp_end
++.type __cp_end,@function
+ .global __cp_cancel
+ .hidden __cp_cancel
++.type __cp_cancel,@function
+ .hidden __cancel
+ .global __syscall_cp_asm
+ .hidden __syscall_cp_asm
+--- a/src/thread/pthread_create.c
++++ b/src/thread/pthread_create.c
+@@ -67,12 +67,6 @@ _Noreturn void __pthread_exit(void *resu
+ exit(0);
+ }
+
+- if (self->locale != &libc.global_locale) {
+- a_dec(&libc.uselocale_cnt);
+- if (self->locale->ctype_utf8)
+- a_dec(&libc.bytelocale_cnt_minus_1);
+- }
+-
+ /* Process robust list in userspace to handle non-pshared mutexes
+ * and the detached thread case where the robust list head will
+ * be invalid when the kernel would process it. */
projects / openwrt / staging / wigyori.git / commitdiff