mpc85xx-p1010: add Kernel 5.10 support
authorDavid Bauer <mail@david-bauer.net>
Tue, 16 Feb 2021 21:05:13 +0000 (22:05 +0100)
committerDavid Bauer <mail@david-bauer.net>
Sat, 20 Feb 2021 00:26:00 +0000 (01:26 +0100)
Tested on: Sophos RED 15W

The TP-Link WL-WDR4900 needs to be disabled when 5.10 becomes the
default kernel.

When building with all kmods enabled, the resulting kernel image
exceeds the maximum size the bootloader reads from the flash.

For more information, see GitHub issue #1773

Signed-off-by: David Bauer <mail@david-bauer.net>
target/linux/mpc85xx/config-5.10 [new file with mode: 0644]
target/linux/mpc85xx/p1010/target.mk
target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch [new file with mode: 0644]
target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch [new file with mode: 0644]

diff --git a/target/linux/mpc85xx/config-5.10 b/target/linux/mpc85xx/config-5.10
new file mode 100644 (file)
index 0000000..cb0d08b
--- /dev/null
@@ -0,0 +1,280 @@
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_ADVANCED_OPTIONS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_AR8216_PHY_LEDS=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_MMAP_RND_BITS=11
+CONFIG_ARCH_MMAP_RND_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_BITS_MIN=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
+CONFIG_ASN1=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOOKE=y
+CONFIG_BOOKE_WDT=y
+# CONFIG_BSC9131_RDB is not set
+# CONFIG_BSC9132_QDS is not set
+# CONFIG_C293_PCIE is not set
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CLZ_TAB=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_COMMON_CLK is not set
+CONFIG_COMPAT_32BIT_TIME=y
+# CONFIG_CORENET_GENERIC is not set
+# CONFIG_CPM2 is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+# CONFIG_CRYPTO_AES_PPC_SPE is not set
+CONFIG_CRYPTO_AKCIPHER=y
+CONFIG_CRYPTO_AKCIPHER2=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_MD5_PPC is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RSA=y
+# CONFIG_CRYPTO_SHA1_PPC is not set
+# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
+# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
+CONFIG_DATA_SHIFT=12
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_E5500_CPU is not set
+# CONFIG_E6500_CPU is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_FSL_ENETC_MDIO is not set
+# CONFIG_FSL_FMAN is not set
+CONFIG_FSL_LBC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_SOC_BOOKE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_CPU=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GEN_RTC=y
+# CONFIG_GE_IMP3A is not set
+CONFIG_GIANFAR=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HIVEAP_330 is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_XIPHERA is not set
+CONFIG_HZ=250
+CONFIG_HZ_250=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_MPC=y
+CONFIG_ILLEGAL_POINTER_VALUE=0
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISA_DMA_API=y
+CONFIG_KERNEL_START=0xc0000000
+# CONFIG_KSI8560 is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LIBFDT=y
+CONFIG_LLD_VERSION=0
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOWMEM_CAM_NUM=3
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LXT_PHY=y
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+# CONFIG_MFD_ROHM_BD71828 is not set
+CONFIG_MIGRATION=y
+CONFIG_MMU_GATHER_PAGE_SIZE=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MPC8536_DS is not set
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_RDB is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_MSGR is not set
+CONFIG_MPIC_TIMER=y
+CONFIG_MPILIB=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MVME2500 is not set
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NLS=y
+CONFIG_NR_IRQS=512
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DMA_DEFAULT_COHERENT=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND=y
+# CONFIG_P1010_RDB is not set
+# CONFIG_P1022_DS is not set
+# CONFIG_P1022_RDK is not set
+# CONFIG_P1023_RDB is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_PANDA is not set
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_ALIGN=0x04000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_PHYS_64BIT is not set
+# CONFIG_PMU_SYSFS is not set
+# CONFIG_PPA8548 is not set
+CONFIG_PPC=y
+CONFIG_PPC32=y
+# CONFIG_PPC64 is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_BARRIER_NOSPEC=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_BOOK3S_6xx is not set
+CONFIG_PPC_DOORBELL=y
+# CONFIG_PPC_E500MC is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+CONFIG_PPC_FSL_BOOK3E=y
+CONFIG_PPC_INDIRECT_PCI=y
+# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+CONFIG_PPC_PAGE_SHIFT=12
+# CONFIG_PPC_PTDUMP is not set
+# CONFIG_PPC_QEMU_E500 is not set
+CONFIG_PPC_SMP_MUXED_IPI=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_PPC_WERROR=y
+CONFIG_QE_GPIO=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_RAS=y
+# CONFIG_RED_15W_REV1 is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=y
+# CONFIG_RTC_DRV_RV3032 is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+# CONFIG_SBC8548 is not set
+# CONFIG_SCOM_DEBUGFS is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+# CONFIG_SOCRATES is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPE=y
+CONFIG_SPE_POSSIBLE=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SRCU=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_STX_GP3 is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_THREAD_SHIFT=13
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TINY_SRCU=y
+# CONFIG_TL_WDR4900_V1 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_TWR_P102x is not set
+CONFIG_UCC=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_VDSO32=y
+# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WS_AP3710I is not set
+# CONFIG_XES_MPC85xx is not set
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_XZ_DEC_POWERPC=y
index 12ed78ace19833b7d93db066dadac1bbd01e9c7b..1140a325b6a4dd2f314a8b9cceeed9b874f423f0 100644 (file)
@@ -2,6 +2,8 @@ BOARDNAME:=P1010
 FEATURES+=nand
 KERNELNAME:=simpleImage.tl-wdr4900-v1
 
+KERNEL_TESTING_PATCHVER:=5.10
+
 define Target/Description
        Build firmware images for P1010 based boards.
 endef
diff --git a/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-5.10/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
new file mode 100644 (file)
index 0000000..5e5ab10
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/powerpc/platforms/85xx/common.c
++++ b/arch/powerpc/platforms/85xx/common.c
+@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
+       { .compatible = "fsl,mpc8548-guts", },
+       /* Probably unnecessary? */
+       { .compatible = "gpio-leds", },
++      { .compatible = "gpio-keys", },
+       /* For all PCI controllers */
+       { .compatible = "fsl,mpc8540-pci", },
+       { .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch
new file mode 100644 (file)
index 0000000..4da431e
--- /dev/null
@@ -0,0 +1,83 @@
+From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Wed, 20 Feb 2013 08:40:33 +0100
+Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
+ board
+
+This patch adds support for the TP-Link TL-WDR4900 v1
+concurrent dual-band wireless router. The devices uses
+the Freescale P1014 SoC.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ arch/powerpc/boot/Makefile           |  3 ++-
+ arch/powerpc/boot/wrapper            |  5 +++++
+ arch/powerpc/platforms/85xx/Kconfig  | 12 ++++++++++++
+ arch/powerpc/platforms/85xx/Makefile |  1 +
+ 4 files changed, 20 insertions(+), 1 deletion(-)
+
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -157,6 +157,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
+ src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+ src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
++src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
+ src-wlib := $(sort $(src-wlib-y))
+ src-plat := $(sort $(src-plat-y))
+@@ -336,7 +337,7 @@ image-$(CONFIG_TQM8555)                    += cuImage.tqm
+ image-$(CONFIG_TQM8560)                       += cuImage.tqm8560
+ image-$(CONFIG_SBC8548)                       += cuImage.sbc8548
+ image-$(CONFIG_KSI8560)                       += cuImage.ksi8560
+-
++image-$(CONFIG_TL_WDR4900_V1)         += simpleImage.tl-wdr4900-v1
+ # Board ports in arch/powerpc/platform/86xx/Kconfig
+ image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -324,6 +324,11 @@ adder875-redboot)
+     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+     binary=y
+     ;;
++simpleboot-tl-wdr4900-v1)
++    platformo="$object/fixed-head.o $object/simpleboot.o"
++    link_address='0x1000000'
++    binary=y
++    ;;
+ simpleboot-*)
+     platformo="$object/fixed-head.o $object/simpleboot.o"
+     binary=y
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -170,6 +170,18 @@ config STX_GP3
+       select CPM2
+       select DEFAULT_UIMAGE
++config TL_WDR4900_V1
++    bool "TP-Link TL-WDR4900 v1"
++    select DEFAULT_UIMAGE
++    select ARCH_REQUIRE_GPIOLIB
++    select GPIO_MPC8XXX
++    select SWIOTLB
++    help
++      This option enables support for the TP-Link TL-WDR4900 v1 board.
++
++      This board is a Concurrent Dual-Band wireless router with a
++      Freescale P1014 SoC.
++
+ config TQM8540
+       bool "TQ Components TQM8540"
+       help
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC)   += coren
+ obj-$(CONFIG_FB_FSL_DIU)      += t1042rdb_diu.o
+ obj-$(CONFIG_STX_GP3)   += stx_gp3.o
+ obj-$(CONFIG_TQM85xx)   += tqm85xx.o
++obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
+ obj-$(CONFIG_SBC8548)     += sbc8548.o
+ obj-$(CONFIG_PPA8548)     += ppa8548.o
+ obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
diff --git a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch
new file mode 100644 (file)
index 0000000..3456839
--- /dev/null
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -49,6 +49,17 @@ config BSC9132_QDS
+         and dual StarCore SC3850 DSP cores.
+         Manufacturer : Freescale Semiconductor, Inc
++config HIVEAP_330
++    bool "Aerohive HiveAP-330"
++    select DEFAULT_UIMAGE
++    select ARCH_REQUIRE_GPIOLIB
++    select GPIO_MPC8XXX
++    help
++      This option enables support for the Aerohive HiveAP-330 board.
++
++      This board is a Concurrent Dual-Band wireless access point with a
++      Freescale P1020 SoC.
++
+ config MPC8540_ADS
+       bool "Freescale MPC8540 ADS"
+       select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -10,6 +10,7 @@ obj-y += common.o
+ obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+ obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
+ obj-$(CONFIG_C293_PCIE)   += c293pcie.o
++obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
+ obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
+ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
diff --git a/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-5.10/102-powerpc-add-cmdline-override.patch
new file mode 100644 (file)
index 0000000..924ce93
--- /dev/null
@@ -0,0 +1,37 @@
+--- a/arch/powerpc/Kconfig
++++ b/arch/powerpc/Kconfig
+@@ -885,6 +885,14 @@ config CMDLINE_FORCE
+         This is useful if you cannot or don't want to change the
+         command-line options your boot loader passes to the kernel.
++config CMDLINE_OVERRIDE
++    bool "Use alternative cmdline from device tree"
++    help
++      Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
++      be used, this is not a good option for kernels that are shared across
++      devices. This setting enables using "chosen/cmdline-override" as the
++      cmdline if it exists in the device tree.
++
+ config EXTRA_TARGETS
+       string "Additional default image types"
+       help
+--- a/drivers/of/fdt.c
++++ b/drivers/of/fdt.c
+@@ -1060,6 +1060,17 @@ int __init early_init_dt_scan_chosen(uns
+       if (p != NULL && l > 0)
+               strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
++    /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
++     * device tree option of chosen/bootargs-override. This is
++     * helpful on boards where u-boot sets bootargs, and is unable
++     * to be modified.
++     */
++#ifdef CONFIG_CMDLINE_OVERRIDE
++      p = of_get_flat_dt_prop(node, "bootargs-override", &l);
++      if (p != NULL && l > 0)
++              strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
++#endif
++
+       /*
+        * CONFIG_CMDLINE is meant to be a default in case nothing else
+        * managed to set the command line, unless CONFIG_CMDLINE_FORCE
diff --git a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch
new file mode 100644 (file)
index 0000000..b84a566
--- /dev/null
@@ -0,0 +1,29 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -173,6 +173,16 @@ config XES_MPC85xx
+         Manufacturer: Extreme Engineering Solutions, Inc.
+         URL: <http://www.xes-inc.com/>
++config RED_15W_REV1
++      bool "Sophos RED 15w Rev.1"
++      select DEFAULT_UIMAGE
++      select ARCH_REQUIRE_GPIOLIB
++      select GPIO_MPC8XXX
++      help
++        This option enables support for the Sophos RED 15w Rev.1 board.
++
++        This board is a wireless VPN router with a Freescale P1010 SoC.
++
+ config STX_GP3
+       bool "Silicon Turnkey Express GP3"
+       help
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
+ obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
+ obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU)      += t1042rdb_diu.o
++obj-$(CONFIG_RED_15W_REV1)    += red15w_rev1.o
+ obj-$(CONFIG_STX_GP3)   += stx_gp3.o
+ obj-$(CONFIG_TQM85xx)   += tqm85xx.o
+ obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
diff --git a/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-5.10/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
new file mode 100644 (file)
index 0000000..a22f251
--- /dev/null
@@ -0,0 +1,162 @@
+From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Sun, 30 Dec 2018 23:24:41 +0100
+Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
+
+This patch apply chages for OpenWRT in P2020RDB
+dts file.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
+ 1 file changed, 63 insertions(+), 35 deletions(-)
+
+--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
++++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+@@ -5,10 +5,15 @@
+  * Copyright 2009-2012 Freescale Semiconductor Inc.
+  */
++/dts-v1/;
++
+ /include/ "p2020si-pre.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++
+ / {
+-      model = "fsl,P2020RDB";
++      model = "Freescale P2020RDB";
+       compatible = "fsl,P2020RDB";
+       aliases {
+@@ -34,48 +39,38 @@
+                         0x2 0x0 0x0 0xffb00000 0x00020000>;
+               nor@0,0 {
+-                      #address-cells = <1>;
+-                      #size-cells = <1>;
+                       compatible = "cfi-flash";
+                       reg = <0x0 0x0 0x1000000>;
+                       bank-width = <2>;
+                       device-width = <1>;
+-                      partition@0 {
+-                              /* This location must not be altered  */
+-                              /* 256KB for Vitesse 7385 Switch firmware */
+-                              reg = <0x0 0x00040000>;
+-                              label = "NOR (RO) Vitesse-7385 Firmware";
+-                              read-only;
+-                      };
+-
+-                      partition@40000 {
+-                              /* 256KB for DTB Image */
+-                              reg = <0x00040000 0x00040000>;
+-                              label = "NOR (RO) DTB Image";
+-                              read-only;
+-                      };
++                      partitions {
++                              compatible = "fixed-partitions";
++                              #address-cells = <1>;
++                              #size-cells = <1>;
+-                      partition@80000 {
+-                              /* 3.5 MB for Linux Kernel Image */
+-                              reg = <0x00080000 0x00380000>;
+-                              label = "NOR (RO) Linux Kernel Image";
+-                              read-only;
+-                      };
++                              partition@0 {
++                                      /* This location must not be altered  */
++                                      /* 256KB for Vitesse 7385 Switch firmware */
++                                      reg = <0x0 0x00040000>;
++                                      label = "NOR (RO) Vitesse-7385 Firmware";
++                                      read-only;
++                              };
+-                      partition@400000 {
+-                              /* 11MB for JFFS2 based Root file System */
+-                              reg = <0x00400000 0x00b00000>;
+-                              label = "NOR (RW) JFFS2 Root File System";
+-                      };
++                              partition@40000 {
++                                      compatible = "denx,fit";
++                                      reg = <0x00040000 0x00ec0000>;
++                                      label = "firmware";
++                              };
+-                      partition@f00000 {
+-                              /* This location must not be altered  */
+-                              /* 512KB for u-boot Bootloader Image */
+-                              /* 512KB for u-boot Environment Variables */
+-                              reg = <0x00f00000 0x00100000>;
+-                              label = "NOR (RO) U-Boot Image";
+-                              read-only;
++                              partition@f00000 {
++                                      /* This location must not be altered  */
++                                      /* 512KB for u-boot Bootloader Image */
++                                      /* 512KB for u-boot Environment Variables */
++                                      reg = <0x00f00000 0x00100000>;
++                                      label = "u-boot";
++                                      read-only;
++                              };
+                       };
+               };
+@@ -140,13 +135,43 @@
+       soc: soc@ffe00000 {
+               ranges = <0x0 0x0 0xffe00000 0x100000>;
++              gpio0: gpio-controller@fc00 {
++              };
++
+               i2c@3000 {
++                      temperature-sensor@4c {
++                              compatible = "adi,adt7461";
++                              reg = <0x4c>;
++                      };
++
++                      eeprom@50 {
++                              compatible = "atmel,24c256";
++                              reg = <0x50>;
++                      };
++
+                       rtc@68 {
+                               compatible = "dallas,ds1339";
+                               reg = <0x68>;
+                       };
+               };
++              i2c@3100 {
++                      pmic@11 {
++                              compatible = "zl2006";
++                              reg = <0x11>;
++                      };
++
++                      gpio@18 {
++                              compatible = "nxp,pca9557";
++                              reg = <0x18>;
++                      };
++
++                      eeprom@52 {
++                              compatible = "atmel,24c01";
++                              reg = <0x52>;
++                      };
++              };
++
+               spi@7000 {
+                       flash@0 {
+                               #address-cells = <1>;
+@@ -200,10 +225,12 @@
+                       phy0: ethernet-phy@0 {
+                               interrupts = <3 1 0 0>;
+                               reg = <0x0>;
++                              reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       };
+                       phy1: ethernet-phy@1 {
+                               interrupts = <3 1 0 0>;
+                               reg = <0x1>;
++                              reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+                       };
+                       tbi-phy@2 {
+                               device_type = "tbi-phy";
diff --git a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch
new file mode 100644 (file)
index 0000000..a08bc30
--- /dev/null
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -60,6 +60,17 @@ config HIVEAP_330
+       This board is a Concurrent Dual-Band wireless access point with a
+       Freescale P1020 SoC.
++config PANDA
++      bool "OCEDO PANDA"
++      select DEFAULT_UIMAGE
++      select ARCH_REQUIRE_GPIOLIB
++      select GPIO_MPC8XXX
++      help
++        This option enables support for the OCEDO PANDA board.
++
++        This board is a Concurrent Dual-Band wireless access point with a
++        Freescale P1020 SoC.
++
+ config MPC8540_ADS
+       bool "Freescale MPC8540 ADS"
+       select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
+ obj-$(CONFIG_P1022_DS)    += p1022_ds.o
+ obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
+ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
++obj-$(CONFIG_PANDA)       += panda.o
+ obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
+ obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU)      += t1042rdb_diu.o
diff --git a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch
new file mode 100644 (file)
index 0000000..4bacedb
--- /dev/null
@@ -0,0 +1,30 @@
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -71,6 +71,17 @@ config PANDA
+         This board is a Concurrent Dual-Band wireless access point with a
+         Freescale P1020 SoC.
++config WS_AP3710I
++      bool "Enterasys WS-AP3710i"
++      select DEFAULT_UIMAGE
++      select ARCH_REQUIRE_GPIOLIB
++      select GPIO_MPC8XXX
++      help
++        This option enables support for the Enterasys WS-AP3710i board.
++
++        This board is a Concurrent Dual-Band wireless access point with a
++        Freescale P1020 SoC.
++
+ config MPC8540_ADS
+       bool "Freescale MPC8540 ADS"
+       select DEFAULT_UIMAGE
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
+ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
+ obj-$(CONFIG_PANDA)       += panda.o
+ obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
++obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
+ obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
+ obj-$(CONFIG_FB_FSL_DIU)      += t1042rdb_diu.o
+ obj-$(CONFIG_RED_15W_REV1)    += red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.10/900-powerpc-bootwrapper-disable-uImage-generation.patch
new file mode 100644 (file)
index 0000000..2ba3f83
--- /dev/null
@@ -0,0 +1,42 @@
+From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sat, 29 Feb 2020 14:27:04 +0100
+Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
+
+Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
+instruct the mkimage to use the xz compression, which isn't
+supported. This disables the uImage generation, as OpenWrt
+generates individual uImages for each board using it's own
+toolchain.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ arch/powerpc/boot/Makefile | 9 ---------
+ 1 file changed, 9 deletions(-)
+
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -264,7 +264,6 @@ image-$(CONFIG_PPC_CHRP)           += zImage.chrp
+ image-$(CONFIG_PPC_EFIKA)             += zImage.chrp
+ image-$(CONFIG_PPC_PMAC)              += zImage.pmac
+ image-$(CONFIG_PPC_HOLLY)             += dtbImage.holly
+-image-$(CONFIG_DEFAULT_UIMAGE)                += uImage
+ image-$(CONFIG_EPAPR_BOOT)            += zImage.epapr
+ #
+@@ -395,15 +394,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
+ $(obj)/vmlinux.strip: vmlinux
+       $(STRIP) -s -R .comment $< -o $@
+-$(obj)/uImage: vmlinux $(wrapperbits) FORCE
+-      $(call if_changed,wrap,uboot)
+-
+-$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+-      $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+-
+-$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+-      $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
+-
+ $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+       $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)