ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100"
+ ;;
+wd,mynet-wifi-rangeextender)
+ ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:rssi-low" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimedium" "RSSIMED" "$boardname:blue:rssi-med" "wlan0" "33" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIMAX" "$boardname:blue:rssi-max" "wlan0" "66" "100"
+ ;;
esac
board_config_flush
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ model = "Western Digital My Net Wi-Fi Range Extender";
+ compatible = "wd,mynet-wifi-rangeextender", "qca,ar9344";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "mynet-wifi-rangeextender:blue:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ /* LED has no off state. It's either on or it blinks */
+ };
+
+ lan {
+ label = "mynet-wifi-rangeextender:green:lan";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "mynet-wifi-rangeextender:blue:wifi";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi-rssi-low {
+ label = "mynet-wifi-rangeextender:blue:rssi-low";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-rssi-med {
+ label = "mynet-wifi-rangeextender:blue:rssi-med";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-rssi-max {
+ label = "mynet-wifi-rangeextender:blue:rssi-max";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <50>;
+
+ reset {
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ band-switch {
+ linux,code = <BTN_1>;
+ gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ compatible = /* "s25fl064k", */ "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x40000 0x7a0000>;
+ compatible = "cybertan,trx";
+ };
+
+ nvram: partition@7e0000 {
+ label = "nvram";
+ reg = <0x7e0000 0x10000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0030";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ /* wifi MAC is stored in nvram */
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0x10>;
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ pll-data = <0x0e000000 0x3c000101 0x3c001313>;
+
+ /* ethernet MAC is stored in nvram */
+ phy-mode = "rgmii";
+ phy-handle = <&phy4>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&mdio1 {
+ status = "disabled";
+};
include ./common-netgear.mk
+DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
+
+define Build/cybertan-trx
+ @echo -n '' > $@-empty.bin
+ -$(STAGING_DIR_HOST)/bin/trx -o $@.new \
+ -f $(IMAGE_KERNEL) -F $@-empty.bin \
+ -x 32 -a 0x10000 -x -32 -f $@
+ -mv "$@.new" "$@"
+ -rm $@-empty.bin
+endef
+
+define Build/addpattern
+ -$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \
+ -v v$(ADDPATTERN_VERSION) -i $@ -o $@.new
+ -mv "$@.new" "$@"
+endef
+
define Device/avm_fritz300e
ATH_SOC := ar7242
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k ath10k-firmware-qca9888
endef
TARGET_DEVICES += phicomm_k2t
+
+define Device/wd_mynet-wifi-rangeextender
+ ATH_SOC := ar9344
+ DEVICE_TITLE := Western Digital My Net Wi-Fi Range Extender
+ DEVICE_PACKAGES := rssileds nvram -swconfig
+ IMAGE_SIZE := 7808k
+ ADDPATTERN_ID := mynet-rext
+ ADDPATTERN_VERSION := 1.00.01
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | cybertan-trx | \
+ addpattern | append-metadata
+ SUPPORTED_DEVICES += mynet-rext
+endef
+TARGET_DEVICES += wd_mynet-wifi-rangeextender