--- a/nl80211.h
+++ b/nl80211.h
-@@ -303,8 +303,9 @@
- * passed, all channels allowed for the current regulatory domain
- * are used. Extra IEs can also be passed from the userspace by
- * using the %NL80211_ATTR_IE attribute.
-- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
-- * if scheduled scan is not running.
-+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
-+ * scheduled scan is not running. The caller may assume that as soon
-+ * as the call returns, it is safe to start a new scheduled scan again.
- * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
- * results available.
- * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
-@@ -418,8 +419,18 @@
- * %NL80211_ATTR_SSID attribute, and can optionally specify the association
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
-- * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
-- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
-+ * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
-+ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and
-+ * %NL80211_ATTR_WIPHY_FREQ_HINT.
-+ * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are
-+ * restrictions on BSS selection, i.e., they effectively prevent roaming
-+ * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT
-+ * can be included to provide a recommendation of the initial BSS while
-+ * allowing the driver to roam to other BSSes within the ESS and also to
-+ * ignore this recommendation if the indicated BSS is not ideal. Only one
-+ * set of BSSID,frequency parameters is used (i.e., either the enforcing
-+ * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
-+ * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
- * Background scan period can optionally be
- * specified in %NL80211_ATTR_BG_SCAN_PERIOD,
- * if not specified default background scan configuration
-@@ -492,6 +503,9 @@
+@@ -503,6 +503,9 @@
* TX status event pertaining to the TX request.
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
* management frames at CCK rate or not in 2GHz band.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
* time if it is known that it is no longer necessary.
-@@ -1514,10 +1528,10 @@ enum nl80211_commands {
+@@ -1525,10 +1528,10 @@ enum nl80211_commands {
* operation).
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
*
* @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
* As specified in the &enum nl80211_rxmgmt_flags.
-@@ -1555,6 +1569,31 @@ enum nl80211_commands {
- * data is in the format defined for the payload of the QoS Map Set element
- * in IEEE Std 802.11-2012, 8.4.2.97.
+@@ -1576,9 +1579,21 @@ enum nl80211_commands {
+ * advertise values that cannot always be met. In such cases, an attempt
+ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
*
-+ * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS
-+ * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS
-+ *
-+ * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
-+ * associated stations are supported in AP mode (including P2P GO); u32.
-+ * Since drivers may not have a fixed limit on the maximum number (e.g.,
-+ * other concurrent operations may affect this), drivers are allowed to
-+ * advertise values that cannot always be met. In such cases, an attempt
-+ * to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
-+ *
+ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which
+ * should be updated when the frame is transmitted.
+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
+ * supported number of csa counters.
+ *
-+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
-+ * As specified in the &enum nl80211_tdls_peer_capability.
-+ *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ * As specified in the &enum nl80211_tdls_peer_capability.
+ *
+ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
+ * creation then the new interface will be owned by the netlink socket
+ * that created it and will be destroyed when the socket is closed
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
-@@ -1883,6 +1922,20 @@ enum nl80211_attrs {
+@@ -1914,6 +1929,13 @@ enum nl80211_attrs {
- NL80211_ATTR_QOS_MAP,
+ NL80211_ATTR_TDLS_PEER_CAPABILITY,
-+ NL80211_ATTR_MAC_HINT,
-+ NL80211_ATTR_WIPHY_FREQ_HINT,
-+
-+ NL80211_ATTR_MAX_AP_ASSOC_STA,
-+
-+ NL80211_ATTR_TDLS_PEER_CAPABILITY,
-+
+ NL80211_ATTR_IFACE_SOCKET_OWNER,
+
+ NL80211_ATTR_CSA_C_OFFSETS_TX,
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -2304,9 +2357,35 @@ enum nl80211_band_attr {
- * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
+@@ -2182,6 +2204,8 @@ enum nl80211_sta_bss_param {
+ * Contains a nested array of signal strength attributes (u8, dBm)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
++ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
++ * 802.11 header (u32, kbps)
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+@@ -2213,6 +2237,7 @@ enum nl80211_sta_info {
+ NL80211_STA_INFO_TX_BYTES64,
+ NL80211_STA_INFO_CHAIN_SIGNAL,
+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
++ NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+
+ /* keep last */
+ __NL80211_STA_INFO_AFTER_LAST,
+@@ -2336,9 +2361,34 @@ enum nl80211_band_attr {
* using this channel as the primary or any of the secondary channels
* isn't possible
-+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this
+ * channel. A channel that has the INDOOR_ONLY attribute can only be
+ * used when there is a clear assessment that the device is operating in
*/
enum nl80211_frequency_attr {
__NL80211_FREQUENCY_ATTR_INVALID,
-@@ -2322,6 +2401,11 @@ enum nl80211_frequency_attr {
- NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
+@@ -2355,6 +2405,10 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
-+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
+ NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
+ NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+ NL80211_FREQUENCY_ATTR_NO_20MHZ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
-@@ -2412,12 +2496,14 @@ enum nl80211_reg_type {
- * in KHz. This is not a center a frequency but an actual regulatory
- * band edge.
- * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
-- * frequency range, in KHz.
-+ * frequency range, in KHz.
- * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
- * for a given frequency range. The value is in mBi (100 * dBi).
- * If you don't have one then don't send this.
- * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
- * a given frequency range. The value is in mBm (100 * dBm).
-+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
-+ * If not present or 0 default CAC time will be used.
- * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
- * currently defined
- * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
-@@ -2433,6 +2519,8 @@ enum nl80211_reg_rule_attr {
- NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
- NL80211_ATTR_POWER_RULE_MAX_EIRP,
-
-+ NL80211_ATTR_DFS_CAC_TIME,
-+
- /* keep last */
- __NL80211_REG_RULE_ATTR_AFTER_LAST,
- NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
-@@ -2442,9 +2530,15 @@ enum nl80211_reg_rule_attr {
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
-- * only report BSS with matching SSID.
-+ * only report BSS with matching SSID.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
-- * BSS in scan results. Filtering is turned off if not specified.
-+ * BSS in scan results. Filtering is turned off if not specified. Note that
-+ * if this attribute is in a match set of its own, then it is treated as
-+ * the default value for all matchsets with an SSID, rather than being a
-+ * matchset of its own without an RSSI filter. This is due to problems with
-+ * how this API was implemented in the past. Also, due to the same problem,
-+ * the only way to create a matchset with only an RSSI filter (with this
-+ * attribute) is if there's only a single matchset with the RSSI attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- * attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
-@@ -2477,6 +2571,9 @@ enum nl80211_sched_scan_match_attr {
- * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
- * this includes probe requests or modes of operation that require
- * beaconing.
-+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
-+ * base on contiguous rules and wider channels will be allowed to cross
-+ * multiple contiguous/overlapping frequency ranges.
- */
- enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_OFDM = 1<<0,
-@@ -2488,6 +2585,7 @@ enum nl80211_reg_rule_flags {
- NL80211_RRF_PTMP_ONLY = 1<<6,
- NL80211_RRF_NO_IR = 1<<7,
- __NL80211_RRF_NO_IBSS = 1<<8,
-+ NL80211_RRF_AUTO_BW = 1<<11,
- };
-
- #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
-@@ -2526,10 +2624,13 @@ enum nl80211_dfs_regions {
+@@ -2573,10 +2627,13 @@ enum nl80211_dfs_regions {
* present has been registered with the wireless core that
* has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a
* supported feature.
};
/**
-@@ -3131,6 +3232,7 @@ enum nl80211_key_attributes {
- * in an array of MCS numbers.
- * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
- * see &struct nl80211_txrate_vht
-+ * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
- * @__NL80211_TXRATE_AFTER_LAST: internal
- * @NL80211_TXRATE_MAX: highest TX rate attribute
- */
-@@ -3139,6 +3241,7 @@ enum nl80211_tx_rate_attributes {
- NL80211_TXRATE_LEGACY,
- NL80211_TXRATE_HT,
- NL80211_TXRATE_VHT,
-+ NL80211_TXRATE_GI,
-
- /* keep last */
- __NL80211_TXRATE_AFTER_LAST,
-@@ -3156,6 +3259,12 @@ struct nl80211_txrate_vht {
- __u16 mcs[NL80211_VHT_NSS_MAX];
- };
-
-+enum nl80211_txrate_gi {
-+ NL80211_TXRATE_DEFAULT_GI,
-+ NL80211_TXRATE_FORCE_SGI,
-+ NL80211_TXRATE_FORCE_LGI,
-+};
-+
- /**
- * enum nl80211_band - Frequency band
- * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
-@@ -3595,6 +3704,8 @@ enum nl80211_iface_limit_attrs {
+@@ -3650,6 +3707,8 @@ enum nl80211_iface_limit_attrs {
* different channels may be used within this group.
* @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
* of supported channel widths for radar detection.
* @NUM_NL80211_IFACE_COMB: number of attributes
* @MAX_NL80211_IFACE_COMB: highest attribute number
*
-@@ -3628,6 +3739,7 @@ enum nl80211_if_combination_attrs {
+@@ -3683,6 +3742,7 @@ enum nl80211_if_combination_attrs {
NL80211_IFACE_COMB_STA_AP_BI_MATCH,
NL80211_IFACE_COMB_NUM_CHANNELS,
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
/* keep last */
NUM_NL80211_IFACE_COMB,
-@@ -3801,11 +3913,8 @@ enum nl80211_ap_sme_features {
- * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
- * to work properly to suppport receiving regulatory hints from
- * cellular base stations.
-- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
-- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
-- * in the interface combinations, even when it's only used for scan
-- * and remain-on-channel. This could be due to, for example, the
-- * remain-on-channel implementation requiring a channel context.
-+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only
-+ * here to reserve the value for API/ABI compatibility)
- * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
- * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
- * mode
-@@ -3841,6 +3950,9 @@ enum nl80211_ap_sme_features {
+@@ -3893,6 +3953,9 @@ enum nl80211_ap_sme_features {
* interface. An active monitor interface behaves like a normal monitor
* interface, but gets added to the driver. It ensures that incoming
* unicast packets directed at the configured interface address get ACKed.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
-@@ -3861,6 +3973,7 @@ enum nl80211_feature_flags {
+@@ -3913,6 +3976,7 @@ enum nl80211_feature_flags {
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
};
/**
-@@ -4037,4 +4150,20 @@ struct nl80211_vendor_cmd_info {
- __u32 subcmd;
- };
-
-+/**
-+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
-+ *
-+ * Used by tdls_mgmt() to determine which conditional elements need
-+ * to be added to TDLS Setup frames.
-+ *
-+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
-+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
-+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
-+ */
-+enum nl80211_tdls_peer_capability {
-+ NL80211_TDLS_PEER_HT = 1<<0,
-+ NL80211_TDLS_PEER_VHT = 1<<1,
-+ NL80211_TDLS_PEER_WMM = 1<<2,
-+};
-+
- #endif /* __LINUX_NL80211_H */
OBJS-$(HWSIM) += hwsim.o
--- a/info.c
+++ b/info.c
-@@ -204,6 +204,7 @@ next:
+@@ -207,6 +207,7 @@ next:
}
}
if (tb_band[NL80211_BAND_ATTR_RATES]) {
printf("\t\tBitrates (non-HT):\n");
nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
-@@ -220,6 +221,7 @@ next:
+@@ -223,6 +224,7 @@ next:
printf("\n");
}
}
}
}
-@@ -254,6 +256,7 @@ next:
+@@ -273,6 +275,7 @@ next:
printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
}
if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
int i;
-@@ -265,6 +268,7 @@ next:
+@@ -284,6 +287,7 @@ next:
cipher_name(ciphers[i]));
}
}
if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
-@@ -284,11 +288,13 @@ next:
+@@ -303,11 +307,13 @@ next:
printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
}
if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
struct nlattr *nl_combi;
-@@ -385,6 +391,7 @@ broken_combination:
+@@ -404,6 +410,7 @@ broken_combination:
printf("\tinterface combinations are not supported\n");
}
if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
printf("\tSupported commands:\n");
nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
-@@ -477,6 +484,7 @@ broken_combination:
+@@ -496,6 +503,7 @@ broken_combination:
printf("\t\t * wake up on TCP connection\n");
}
}
if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
printf("\tDevice supports roaming.\n");
-@@ -513,6 +521,7 @@ broken_combination:
+@@ -532,6 +540,7 @@ broken_combination:
}
}
if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
-@@ -533,6 +542,7 @@ broken_combination:
+@@ -552,6 +561,7 @@ broken_combination:
if (features & NL80211_FEATURE_AP_SCAN)
printf("\tDevice supports AP scan.\n");
}
if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
printf("\tDevice supports T-DLS.\n");
-@@ -582,6 +592,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+@@ -601,6 +611,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
"List all wireless devices and their capabilities.");
TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
static int handle_commands(struct nl80211_state *state,
struct nl_cb *cb, struct nl_msg *msg,
int argc, char **argv, enum id_input id)
-@@ -594,6 +605,7 @@ static int handle_commands(struct nl8021
+@@ -613,6 +624,7 @@ static int handle_commands(struct nl8021
}
TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
"list all known commands and their decimal & hex value");