add kernel and other missing NAND flash partitions to allow booting
using stock loader instead of the 2nd-stage bootloader.
This will ease installation from stock firmware on pogoplugs as well
as stg212 aka. medion nas.
Existing users of OpenWrt on those boards will have to boot initramfs
generated after this commit and subsequently flash first the ubinized
image, then again run initramfs to flash sysupgrade.tar image, and
then restore bootcmd in U-Boot environment back to the original setting
('nboot
60500000 0 440000' or something like that) instead of jumping
into the now no longer used 2nd-stage loader.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
nand-ecc-algo = "hamming";
partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
+ label = "stage1";
+ reg = <0x00000000 0x00040000>;
read-only;
};
+ partition@40000 {
+ label = "uboot";
+ reg = <0x00040000 0x00380000>;
+ read-only;
+ };
+
+ partition@3c0000 {
+ label = "uboot_env";
+ reg = <0x003c0000 0x00080000>;
+ };
+
+ partition@440000 {
+ label = "kernel";
+ reg = <0x00440000 0x009c0000>;
+ };
+
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
nand-ecc-algo = "hamming";
partition@0 {
- label = "boot";
- reg = <0x00000000 0x00e00000>;
+ label = "stage1";
+ reg = <0x00000000 0x00040000>;
read-only;
};
+ partition@40000 {
+ label = "uboot";
+ reg = <0x00040000 0x00380000>;
+ read-only;
+ };
+
+ partition@3c0000 {
+ label = "uboot_env";
+ reg = <0x003c0000 0x00080000>;
+ };
+
+ partition@440000 {
+ label = "kernel";
+ reg = <0x00440000 0x009c0000>;
+ };
+
partition@e00000 {
label = "ubi";
reg = <0x00e00000 0x07200000>;
--- /dev/null
+--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
++++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+@@ -74,11 +74,27 @@
+ nand-ecc-algo = "hamming";
+
+ partition@0 {
+- label = "boot";
+- reg = <0x00000000 0x00e00000>;
++ label = "stage1";
++ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
++ partition@40000 {
++ label = "uboot";
++ reg = <0x00040000 0x00380000>;
++ read-only;
++ };
++
++ partition@3c0000 {
++ label = "uboot_env";
++ reg = <0x003c0000 0x00080000>;
++ };
++
++ partition@440000 {
++ label = "kernel";
++ reg = <0x00440000 0x009c0000>;
++ };
++
+ partition@e00000 {
+ label = "ubi";
+ reg = <0x00e00000 0x07200000>;