drop backported patches as they cause regressions and oopses
authorJohn Crispin <john@openwrt.org>
Thu, 23 Feb 2012 07:42:04 +0000 (07:42 +0000)
committerJohn Crispin <john@openwrt.org>
Thu, 23 Feb 2012 07:42:04 +0000 (07:42 +0000)
SVN-Revision: 30690

target/linux/generic/patches-2.6.39/051-linux_atm-chas.patch [deleted file]
target/linux/generic/patches-3.0/051-linux_atm-chas.patch [deleted file]
target/linux/generic/patches-3.1/051-linux_atm-chas.patch [deleted file]

diff --git a/target/linux/generic/patches-2.6.39/051-linux_atm-chas.patch b/target/linux/generic/patches-2.6.39/051-linux_atm-chas.patch
deleted file mode 100644 (file)
index 08bb77d..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-
-
-From: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Date: Wed, 17 Aug 2011 08:37:18 +0200
-Subject: [PATCH 1/2] atm: br2684: Make headroom and hard_header_len depend on the payload type
-
-Routed payload requires less headroom than bridged payload.
-So do not reallocate headroom if not needed.
-Also, add worst case AAL5 overhead to netdev->hard_header_len.
-
-Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
----
- net/atm/br2684.c |    8 ++++++--
- 1 files changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/net/atm/br2684.c b/net/atm/br2684.c
-index 53b0aa1..ed72263 100644
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -202,7 +202,10 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
- {
-       struct br2684_dev *brdev = BRPRIV(dev);
-       struct atm_vcc *atmvcc;
--      int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
-+      int minheadroom = (brvcc->encaps == e_llc) ?
-+              ((brdev->payload == p_bridged) ?
-+                      sizeof(llc_oui_pid_pad) : sizeof(llc_oui_ipv4)) :
-+              ((brdev->payload == p_bridged) ? BR2684_PAD_LEN : 0);
-       if (skb_headroom(skb) < minheadroom) {
-               struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
-@@ -583,6 +586,7 @@ static void br2684_setup(struct net_device *netdev)
-       struct br2684_dev *brdev = BRPRIV(netdev);
-       ether_setup(netdev);
-+      netdev->hard_header_len += sizeof(llc_oui_pid_pad); /* worst case */
-       brdev->net_dev = netdev;
-       netdev->netdev_ops = &br2684_netdev_ops;
-@@ -595,7 +599,7 @@ static void br2684_setup_routed(struct net_device *netdev)
-       struct br2684_dev *brdev = BRPRIV(netdev);
-       brdev->net_dev = netdev;
--      netdev->hard_header_len = 0;
-+      netdev->hard_header_len = sizeof(llc_oui_ipv4); /* worst case */
-       netdev->netdev_ops = &br2684_netdev_ops_routed;
-       netdev->addr_len = 0;
-       netdev->mtu = 1500;
-
-From: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Date: Wed, 17 Aug 2011 08:37:52 +0200
-Subject: [PATCH 2/2] atm: br2684: Avoid alignment issues
-
-Use memcmp() instead of cast to u16 when checking the PAD field.
-
-Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
----
- net/atm/br2684.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/net/atm/br2684.c b/net/atm/br2684.c
-index ed72263..353fccf 100644
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -53,6 +53,7 @@ static const unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
- static const unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
- static const unsigned char llc_oui_pid_pad[] =
-                       { LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
-+static const unsigned char pad[] = { PAD_BRIDGED };
- static const unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
- static const unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
-@@ -453,7 +454,7 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
-                       skb->pkt_type = PACKET_HOST;
-               } else { /* p_bridged */
-                       /* first 2 chars should be 0 */
--                      if (*((u16 *) (skb->data)) != 0)
-+                      if (memcmp(skb->data, pad, BR2684_PAD_LEN) != 0)
-                               goto error;
-                       skb_pull(skb, BR2684_PAD_LEN);
-                       skb->protocol = eth_type_trans(skb, net_dev);
diff --git a/target/linux/generic/patches-3.0/051-linux_atm-chas.patch b/target/linux/generic/patches-3.0/051-linux_atm-chas.patch
deleted file mode 100644 (file)
index 08bb77d..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-
-
-From: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Date: Wed, 17 Aug 2011 08:37:18 +0200
-Subject: [PATCH 1/2] atm: br2684: Make headroom and hard_header_len depend on the payload type
-
-Routed payload requires less headroom than bridged payload.
-So do not reallocate headroom if not needed.
-Also, add worst case AAL5 overhead to netdev->hard_header_len.
-
-Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
----
- net/atm/br2684.c |    8 ++++++--
- 1 files changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/net/atm/br2684.c b/net/atm/br2684.c
-index 53b0aa1..ed72263 100644
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -202,7 +202,10 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
- {
-       struct br2684_dev *brdev = BRPRIV(dev);
-       struct atm_vcc *atmvcc;
--      int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
-+      int minheadroom = (brvcc->encaps == e_llc) ?
-+              ((brdev->payload == p_bridged) ?
-+                      sizeof(llc_oui_pid_pad) : sizeof(llc_oui_ipv4)) :
-+              ((brdev->payload == p_bridged) ? BR2684_PAD_LEN : 0);
-       if (skb_headroom(skb) < minheadroom) {
-               struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
-@@ -583,6 +586,7 @@ static void br2684_setup(struct net_device *netdev)
-       struct br2684_dev *brdev = BRPRIV(netdev);
-       ether_setup(netdev);
-+      netdev->hard_header_len += sizeof(llc_oui_pid_pad); /* worst case */
-       brdev->net_dev = netdev;
-       netdev->netdev_ops = &br2684_netdev_ops;
-@@ -595,7 +599,7 @@ static void br2684_setup_routed(struct net_device *netdev)
-       struct br2684_dev *brdev = BRPRIV(netdev);
-       brdev->net_dev = netdev;
--      netdev->hard_header_len = 0;
-+      netdev->hard_header_len = sizeof(llc_oui_ipv4); /* worst case */
-       netdev->netdev_ops = &br2684_netdev_ops_routed;
-       netdev->addr_len = 0;
-       netdev->mtu = 1500;
-
-From: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Date: Wed, 17 Aug 2011 08:37:52 +0200
-Subject: [PATCH 2/2] atm: br2684: Avoid alignment issues
-
-Use memcmp() instead of cast to u16 when checking the PAD field.
-
-Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
----
- net/atm/br2684.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/net/atm/br2684.c b/net/atm/br2684.c
-index ed72263..353fccf 100644
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -53,6 +53,7 @@ static const unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
- static const unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
- static const unsigned char llc_oui_pid_pad[] =
-                       { LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
-+static const unsigned char pad[] = { PAD_BRIDGED };
- static const unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
- static const unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
-@@ -453,7 +454,7 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
-                       skb->pkt_type = PACKET_HOST;
-               } else { /* p_bridged */
-                       /* first 2 chars should be 0 */
--                      if (*((u16 *) (skb->data)) != 0)
-+                      if (memcmp(skb->data, pad, BR2684_PAD_LEN) != 0)
-                               goto error;
-                       skb_pull(skb, BR2684_PAD_LEN);
-                       skb->protocol = eth_type_trans(skb, net_dev);
diff --git a/target/linux/generic/patches-3.1/051-linux_atm-chas.patch b/target/linux/generic/patches-3.1/051-linux_atm-chas.patch
deleted file mode 100644 (file)
index 08bb77d..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
-
-
-From: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Date: Wed, 17 Aug 2011 08:37:18 +0200
-Subject: [PATCH 1/2] atm: br2684: Make headroom and hard_header_len depend on the payload type
-
-Routed payload requires less headroom than bridged payload.
-So do not reallocate headroom if not needed.
-Also, add worst case AAL5 overhead to netdev->hard_header_len.
-
-Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
----
- net/atm/br2684.c |    8 ++++++--
- 1 files changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/net/atm/br2684.c b/net/atm/br2684.c
-index 53b0aa1..ed72263 100644
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -202,7 +202,10 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
- {
-       struct br2684_dev *brdev = BRPRIV(dev);
-       struct atm_vcc *atmvcc;
--      int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
-+      int minheadroom = (brvcc->encaps == e_llc) ?
-+              ((brdev->payload == p_bridged) ?
-+                      sizeof(llc_oui_pid_pad) : sizeof(llc_oui_ipv4)) :
-+              ((brdev->payload == p_bridged) ? BR2684_PAD_LEN : 0);
-       if (skb_headroom(skb) < minheadroom) {
-               struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
-@@ -583,6 +586,7 @@ static void br2684_setup(struct net_device *netdev)
-       struct br2684_dev *brdev = BRPRIV(netdev);
-       ether_setup(netdev);
-+      netdev->hard_header_len += sizeof(llc_oui_pid_pad); /* worst case */
-       brdev->net_dev = netdev;
-       netdev->netdev_ops = &br2684_netdev_ops;
-@@ -595,7 +599,7 @@ static void br2684_setup_routed(struct net_device *netdev)
-       struct br2684_dev *brdev = BRPRIV(netdev);
-       brdev->net_dev = netdev;
--      netdev->hard_header_len = 0;
-+      netdev->hard_header_len = sizeof(llc_oui_ipv4); /* worst case */
-       netdev->netdev_ops = &br2684_netdev_ops_routed;
-       netdev->addr_len = 0;
-       netdev->mtu = 1500;
-
-From: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Date: Wed, 17 Aug 2011 08:37:52 +0200
-Subject: [PATCH 2/2] atm: br2684: Avoid alignment issues
-
-Use memcmp() instead of cast to u16 when checking the PAD field.
-
-Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
-Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
----
- net/atm/br2684.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/net/atm/br2684.c b/net/atm/br2684.c
-index ed72263..353fccf 100644
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -53,6 +53,7 @@ static const unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
- static const unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
- static const unsigned char llc_oui_pid_pad[] =
-                       { LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
-+static const unsigned char pad[] = { PAD_BRIDGED };
- static const unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
- static const unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
-@@ -453,7 +454,7 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
-                       skb->pkt_type = PACKET_HOST;
-               } else { /* p_bridged */
-                       /* first 2 chars should be 0 */
--                      if (*((u16 *) (skb->data)) != 0)
-+                      if (memcmp(skb->data, pad, BR2684_PAD_LEN) != 0)
-                               goto error;
-                       skb_pull(skb, BR2684_PAD_LEN);
-                       skb->protocol = eth_type_trans(skb, net_dev);