lantiq: Add device tree for P2812HNUF1 and P2812HNUF3
authorJohn Crispin <john@openwrt.org>
Sat, 17 Jan 2015 07:07:06 +0000 (07:07 +0000)
committerJohn Crispin <john@openwrt.org>
Sat, 17 Jan 2015 07:07:06 +0000 (07:07 +0000)
Add device tree for P2812HNUF1 and P2812HNUF3.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43986

target/linux/lantiq/dts/P2812HNUF1.dts [new file with mode: 0644]
target/linux/lantiq/dts/P2812HNUF3.dts [new file with mode: 0644]
target/linux/lantiq/dts/P2812HNUFX.dtsi [new file with mode: 0644]

diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
new file mode 100644 (file)
index 0000000..24ded3e
--- /dev/null
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+/include/ "P2812HNUFX.dtsi"
+
+/ {
+       model = "P2812HNUF1 - ZyXEL P-2812HNU-F1";
+
+       fpi@10000000 {
+               localbus@0 {
+                       nand-parts@0 {
+                               compatible = "gen_nand", "lantiq,nand-xway";
+                               lantiq,cs = <1>;
+                               bank-width = <2>;
+                               reg = <0 0x0 0x2000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x00000 0x40000>;
+                               };
+                               partition@40000 {
+                                       label = "uboot-env";
+                                       reg = <0x40000 0x20000>;
+                               };
+                               partition@60000 {
+                                       label = "kernel";
+                                       reg = <0x60000 0x200000>;
+                               };
+                               partition@260000 {
+                                       label = "ubi";
+                                       reg = <0x260000 0x7da0000>;
+                               };
+                       };
+               };
+               pcie@d900000 {
+                       status = "disabled";
+               };
+       };
+
+       ralink_eep {
+               compatible = "ralink,eeprom";
+               ralink,eeprom = "RT3062.eeprom";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               internet_red {                          /* red */
+                       label = "internet_red";
+                       gpios = <&stp 16 1>;
+               };
+               internet_green {
+                       label = "internet_green";       /* green */
+                       gpios = <&stp 17 1>;
+               };
+               dsl {
+                       label = "dsl";
+                       gpios = <&stp 18 1>;
+               };
+               dsl2 {
+                       label = "dsl2";
+                       gpios = <&stp 19 1>;
+               };
+               wireless_red {                          /* red */
+                       label = "wireless_red";
+                       gpios = <&stp 20 1>;
+               };
+               wireless_green {                        /* green */
+                       label = "wireless_green";
+                       gpios = <&stp 21 1>;
+               };
+               power {                                 /* red */
+                       label = "power";
+                       gpios = <&stp 22 1>;
+               };
+               power2 {                                /* green */
+                       label = "power2";
+                       gpios = <&stp 23 1>;
+               };
+               usb1 {                                  /* green */
+                       label = "usb1";
+                       gpios = <&gpio 38 1>;
+               };
+               usb2 {                                  /* green */
+                       label = "usb2";
+                       gpios = <&gpio 44 1>;
+               };
+               phone1 {                                /* green */
+                       label = "phone1";
+                       gpios = <&gpio 11 1>;
+               };
+               phone1warn {                            /* red */
+                       label = "phone1warn";
+                       gpios = <&gpio 12 1>;
+               };
+               phone2warn {                            /* red */
+                       label = "phone2warn";
+                       gpios = <&gpio 26 1>;
+               };
+               phone2 {                                /* green */
+                       label = "phone2";
+                       gpios = <&gpio 28 1>;
+               };
+       };
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
new file mode 100644 (file)
index 0000000..5d25c3c
--- /dev/null
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+/include/ "P2812HNUFX.dtsi"
+
+/ {
+       model = "P2812HNUF3 - ZyXEL P-2812HNU-F3";
+
+       fpi@10000000 {
+               localbus@0 {
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x800000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x0 0x50000>;
+                                       read-only;
+                               };
+                               partition@50000 {
+                                       label = "uboot-env";
+                                       reg = <0x50000 0x10000>;
+                               };
+                               partition@60000 {
+                                       label = "unused";
+                                       reg = <0x60000 0x7a0000>;
+                               };
+                       };
+
+                       nand-parts@0 {
+                               compatible = "gen_nand", "lantiq,nand-xway";
+                               lantiq,cs = <1>;
+                               bank-width = <2>;
+                               reg = <1 0x0 0x2000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "kernel";
+                                       reg = <0x0 0x200000>;
+                               };
+                               partition@200000 {
+                                       label = "ubi";
+                                       reg = <0x200000 0x7e00000>;
+                               };
+                       };
+               };
+       };
+
+       ralink_eep {
+               compatible = "ralink,eeprom";
+               ralink,eeprom = "RT3092.eeprom";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               internet2 {
+                       label = "internet2";
+                       gpios = <&stp 16 1>;
+               };
+               internet {
+                       label = "internet";
+                       gpios = <&stp 17 1>;
+               };
+               dsl {
+                       label = "dsl";
+                       gpios = <&stp 18 1>;
+               };
+               dsl2 {
+                       label = "dsl2";
+                       gpios = <&stp 19 1>;
+               };
+               wireless_red {
+                       label = "wireless_red";
+                       gpios = <&stp 20 1>;
+               };
+               wireless_green {
+                       label = "wireless_green";
+                       gpios = <&stp 21 1>;
+               };
+               power2 {
+                       label = "power2";
+                       gpios = <&stp 22 1>;
+               };
+               power {
+                       label = "power";
+                       gpios = <&stp 23 1>;
+               };
+               phone1 {
+                       label = "phone1";
+                       gpios = <&gpio 11 1>;
+               };
+               phone1warn {
+                       label = "phone1warn";
+                       gpios = <&gpio 12 1>;
+               };
+               phone2 {
+                       label = "phone2";
+                       gpios = <&gpio 28 1>;
+               };
+               phone2warn {
+                       label = "phone2warn";
+                       gpios = <&gpio 26 1>;
+               };
+       };
+};
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dtsi b/target/linux/lantiq/dts/P2812HNUFX.dtsi
new file mode 100644 (file)
index 0000000..e571eb6
--- /dev/null
@@ -0,0 +1,257 @@
+/include/ "vr9.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
+
+       memory@0 {
+               reg = <0x0 0x8000000>;
+       };
+
+        fpi@10000000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "lantiq,fpi", "simple-bus";
+               ranges = <0x0 0x10000000 0xEEFFFFF>;
+               reg = <0x10000000 0xEF00000>;
+
+               localbus@0 {
+                       #address-cells = <2>;
+                       #size-cells = <1>;
+                       ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+                               1 0 0x4000000 0x4000010>; /* addsel1 */
+                       compatible = "lantiq,localbus", "simple-bus";
+               };
+
+               gpio: pinmux@E100B10 {
+                       compatible = "lantiq,pinctrl-xr9";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+                       
+                       interrupt-parent = <&icu0>;
+                       interrupts = <166 135 66 40 41 42 38>;
+
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xE100B10 0xA0>;
+
+                       state_default: pinmux {
+                               exin3 {
+                                       lantiq,groups = "exin3";
+                                       lantiq,function = "exin";
+                               };
+                               mdio {
+                                       lantiq,groups = "mdio";
+                                       lantiq,function = "mdio";
+                               };
+                               gphy-leds {
+                                       lantiq,groups = "gphy0 led1", "gphy1 led1",
+                                                       "gphy0 led2", "gphy1 led2";
+                                       lantiq,function = "gphy";
+                                       lantiq,pull = <2>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               stp {
+                                       lantiq,groups = "stp";
+                                       lantiq,function = "stp";
+                                       lantiq,pull = <2>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               pci-in {
+                                       lantiq,groups = "req1";
+                                       lantiq,function = "pci";
+                                       lantiq,output = <0>;
+                                       lantiq,open-drain = <1>;
+                                       lantiq,pull = <2>;
+                               };
+                               pci-out {
+                                       lantiq,groups = "gnt1";
+                                       lantiq,function = "pci";
+                                       lantiq,output = <1>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,pull = <0>;
+                               };
+                               pci_rst {
+                                       lantiq,pins = "io21";
+                                       lantiq,output = <1>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,pull = <2>;
+                               };
+                               pcie-rst {
+                                       lantiq,pins = "io38";
+                                       lantiq,pull = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               ifxhcd-rst {
+                                       lantiq,pins = "io33";
+                                       lantiq,pull = <0>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               nand_out {
+                                       lantiq,groups = "nand cle", "nand ale";
+                                       lantiq,function = "ebu";
+                                       lantiq,output = <1>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,pull = <0>;
+                               };
+                               nand_cs1 {
+                                       lantiq,groups = "nand cs1";
+                                       lantiq,function = "ebu";
+                                       lantiq,open-drain = <0>;
+                                       lantiq,pull = <0>;
+                               };
+                       };
+               };
+
+               eth@E108000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,xrx200-net";
+                       reg = < 0xE108000 0x3000        /* switch */
+                               0xE10B100 0x70          /* mdio */
+                               0xE10B1D8 0x30          /* mii */
+                               0xE10B308 0x30 >;       /* pmac */
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 72>;
+
+                       lan: interface@0 {
+                               compatible = "lantiq,xrx200-pdi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0>;
+                               mac-address = [ 00 11 22 33 44 55 ];
+                               lantiq,switch;
+
+                               ethernet@0 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <0>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy0>;
+                               };
+                               ethernet@1 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <1>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy1>;
+                               };
+                               ethernet@2 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <2>;
+                                       phy-mode = "gmii";
+                                       phy-handle = <&phy11>;
+                               };
+                               ethernet@4 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <4>;
+                                       phy-mode = "gmii";
+                                       phy-handle = <&phy13>;
+                               };
+                               ethernet@5 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <5>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy5>;
+                               };
+                       };
+
+                       mdio@0 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "lantiq,xrx200-mdio";
+
+                               phy0: ethernet-phy@0 {
+                                       reg = <0x0>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy1: ethernet-phy@1 {
+                                       reg = <0x1>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy5: ethernet-phy@5 {
+                                       reg = <0x5>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy11: ethernet-phy@11 {
+                                       reg = <0x11>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy13: ethernet-phy@13 {
+                                       reg = <0x13>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                       };
+               };
+
+               stp: stp@E100BB0 {
+                       compatible = "lantiq,gpio-stp-xway";
+                       reg = <0xE100BB0 0x40>;
+                       #gpio-cells = <2>;
+                       gpio-controller;
+
+                       lantiq,shadow = <0xffffff>;
+                       lantiq,groups = <0x7>;
+                       lantiq,dsl = <0x0>;
+                       lantiq,phy1 = <0x0>;
+                       lantiq,phy2 = <0x0>;
+               };
+
+               ifxhcd@E101000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+                       lantiq,portmask = <0x3>;
+               };
+
+               pci@E105400 {
+                       status = "okay";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       #interrupt-cells = <1>;
+                       compatible = "lantiq,pci-xway";
+                       bus-range = <0x0 0x0>;
+                       ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
+                               0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
+                       reg = <0x7000000 0x8000         /* config space */
+                               0xE105400 0x400>;       /* pci bridge */
+                       lantiq,bus-clock = <33333333>;
+                       /*lantiq,external-clock;*/
+                       lantiq,delay-hi = <0>; /* 0ns delay */
+                       lantiq,delay-lo = <0>; /* 0.0ns delay */
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <
+                               0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
+                               >;
+                       gpio-reset = <&gpio 21 0>;
+                       req-mask = <0x1>;       /* GNT1 */
+               };
+       };
+
+       gphy-xrx200 {
+               compatible = "lantiq,phy-xrx200";
+               firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
+               firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
+               phys = [ 00 01 ];
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 39 1>;
+                       linux,code = <0x198>;
+               };
+
+               rfkill {
+                       label = "rfkill";
+                       gpios = <&gpio 1 1>;
+                       linux,code = <0xf7>;
+               };
+       };
+};