improve support of the Infineon EASY 5120-RT Reference Board
authorGabor Juhos <juhosg@openwrt.org>
Thu, 1 May 2008 18:34:44 +0000 (18:34 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Thu, 1 May 2008 18:34:44 +0000 (18:34 +0000)
SVN-Revision: 10996

target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c
target/linux/adm5120/files/drivers/leds/leds-adm5120.c
target/linux/adm5120/router_le/profiles/Infineon.mk [new file with mode: 0644]

index be8292a949324d2c26ea1629219684b13799039c..8ef01e6e68c66189d20664c597b57b814da8f99b 100644 (file)
@@ -4,7 +4,7 @@
  *  Infineon boards
  *
  *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
  *
  *  This program is free software; you can redistribute it and/or modify it
  *  under the terms of the GNU General Public License version 2 as published
 #include <asm/bootinfo.h>
 #include <asm/gpio.h>
 
+#include <adm5120_defs.h>
+#include <adm5120_irq.h>
 #include <adm5120_board.h>
 #include <adm5120_platform.h>
+#include <adm5120_info.h>
 
 static void switch_bank_gpio3(unsigned bank)
 {
@@ -62,6 +65,10 @@ static struct mtd_partition easy_partitions[] = {
        }
 };
 
+static struct adm5120_pci_irq easy5120rt_pci_irqs[] __initdata = {
+       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
 static struct platform_device *easy5120pata_devices[] __initdata = {
        &adm5120_flash0_device,
        /* TODO: add VINETIC2 device? */
@@ -69,6 +76,7 @@ static struct platform_device *easy5120pata_devices[] __initdata = {
 
 static struct platform_device *easy5120rt_devices[] __initdata = {
        &adm5120_flash0_device,
+       &adm5120_hcd_device,
 };
 
 static struct platform_device *easy5120wvoip_devices[] __initdata = {
@@ -107,6 +115,10 @@ static void __init easy_setup_bga(void)
        /* TODO: setup mac addresses */
 }
 
+unsigned char easy5120rt_vlans[6] = {
+       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
+};
+
 /*--------------------------------------------------------------------------*/
 
 ADM5120_BOARD_START(EASY5120PATA, "Infineon EASY 5120P-ATA Reference Board")
@@ -119,8 +131,11 @@ ADM5120_BOARD_END
 ADM5120_BOARD_START(EASY5120RT, "Infineon EASY 5120-RT Reference Board")
        .board_setup    = easy_setup_bga,
        .eth_num_ports  = 5,
+       .eth_vlans      = easy5120rt_vlans,
        .num_devices    = ARRAY_SIZE(easy5120rt_devices),
        .devices        = easy5120rt_devices,
+       .pci_nr_irqs    = ARRAY_SIZE(easy5120rt_pci_irqs),
+       .pci_irq_map    = easy5120rt_pci_irqs,
 ADM5120_BOARD_END
 
 ADM5120_BOARD_START(EASY5120WVOIP, "Infineon EASY 5120-WVoIP Reference Board")
index 823254c5ec7173da5ae5c1ff19c592192b95bcf1..216acf837fe7fd7420fced93bc5b3351909ffb69 100644 (file)
@@ -145,6 +145,22 @@ LED_ARRAY(br61x4wg) {
        LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",       NULL),
 };
 
+/*
+ * Infineon boards
+ */
+LED_ARRAY(easy5120rt) {
+       LED_INV(ADM5120_GPIO_PIN6, "user",              NULL),
+       LED_INV(ADM5120_GPIO_P0L0, "lan0_led1",         NULL),
+       LED_INV(ADM5120_GPIO_P0L1, "lan0_led2",         NULL),
+       LED_INV(ADM5120_GPIO_P1L0, "lan1_led1",         NULL),
+       LED_INV(ADM5120_GPIO_P1L1, "lan1_led2",         NULL),
+       LED_INV(ADM5120_GPIO_P2L0, "lan2_led1",         NULL),
+       LED_INV(ADM5120_GPIO_P2L1, "lan2_led2",         NULL),
+       LED_INV(ADM5120_GPIO_P3L0, "lan3_led1",         NULL),
+       LED_INV(ADM5120_GPIO_P3L1, "lan3_led2",         NULL),
+       LED_INV(ADM5120_GPIO_P4L0, "wan",               NULL),
+};
+
 /*
  * Mikrotik boards
  */
@@ -173,17 +189,17 @@ LED_ARRAY(rb133c) {
 };
 
 LED_ARRAY(rb153) {
-       LED_STD(ADM5120_GPIO_PIN5, "user",              NULL),
-        LED_INV(ADM5120_GPIO_P0L1, "lan1_speed",       NULL),
-        LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact",      NULL),
-        LED_INV(ADM5120_GPIO_P1L1, "lan5_speed",       NULL),
-        LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact",      NULL),
-        LED_INV(ADM5120_GPIO_P2L1, "lan4_speed",       NULL),
-        LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact",       NULL),
-        LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",        NULL),
-        LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",       NULL),
-        LED_INV(ADM5120_GPIO_P4L1, "lan2_speed",        NULL),
-        LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact",       NULL),
+       LED_STD(ADM5120_GPIO_PIN5, "user",              NULL),
+       LED_INV(ADM5120_GPIO_P0L1, "lan1_speed",        NULL),
+       LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact",       NULL),
+       LED_INV(ADM5120_GPIO_P1L1, "lan5_speed",        NULL),
+       LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact",       NULL),
+       LED_INV(ADM5120_GPIO_P2L1, "lan4_speed",        NULL),
+       LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact",       NULL),
+       LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",        NULL),
+       LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",       NULL),
+       LED_INV(ADM5120_GPIO_P4L1, "lan2_speed",        NULL),
+       LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact",       NULL),
 };
 
 /*
@@ -278,6 +294,8 @@ static struct mach_data machines[] __initdata = {
        /* Edimax */
        MACH_DATA(MACH_ADM5120_BR6104K, br6104k),
        MACH_DATA(MACH_ADM5120_BR61x4WG, br61x4wg),
+       /* Infineon */
+       MACH_DATA(MACH_ADM5120_EASY5120RT, easy5120rt),
        /* Mikrotik */
        MACH_DATA(MACH_ADM5120_RB_111,  rb100),
        MACH_DATA(MACH_ADM5120_RB_112,  rb100),
diff --git a/target/linux/adm5120/router_le/profiles/Infineon.mk b/target/linux/adm5120/router_le/profiles/Infineon.mk
new file mode 100644 (file)
index 0000000..3f207d4
--- /dev/null
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/EASY5120RT
+       NAME:=Infineon EASY 5120-RT Reference Board
+       PACKAGES:=kmod-usb-core kmod-usb-adm5120
+endef
+
+define Profile/EASY5120RT/Description
+       Package set optimized for the Infineon EASY 5120-RT Reference Board
+endef
+
+$(eval $(call Profile,EASY5120RT))